Product Information

Special Advantages
easy to apply low density proven corrosion protection

DENSO-Mastic PF
Petrolatum-based void filler, corrosion protection mastic and profiling compound for subsequent wrapping of DENSO petrolatum tapes.

Description
DENSO-Mastic PF is a petrolatum based void filler and profiling compound for irregular shapes on buried pipeline installations (e.g. flanged connections or valves). Due to a special composition and the contained small polystyrene balls the application of DENSO Mastic PF at low ambient temperatures is particularly easy, compared to standard petrolatum filler mastics.

Properties
Property Colour Density Saponification value Drip point (Ubbelohde) Cone penetration Unit g / cm mg KOH / g C 1 / 10 mm Typical value green-brown 0,5 - 0,55 2 65 85 Standard ISO 2811 DIN EN 12068 DIN 51801 DIN 51804

Application
Flange coating The areas to be coated have to be clean, dry. Rust, dirt, humidity and any other contamination have to be removed prior to coating. Mechanical surface preparation can be performed by wire brushing. A surface cleanliness corresponding to ST2 according ISO 8501-1 is sufficient for subsequent coating with DENSO-Mastic PF and DENSO petrolatum tapes. DENSO-Mastic PF is applied by hand or spatula. Fill the flange gap and potential hollows around nuts and bolts with Mastic PF. Subsequently wrap the required number of layers of DENSO petrolatum tape (e.g. DENSOPLASTTape).

Packing
DENSO-Mastic PF Supplied in plastics buckets Contents 2 litre and 12 litre

DENSO GmbH
P.O.Box 150120 51344 Leverkusen Germany Tel. +49-(0)214-2602-0 Fax +49-(0)214-2602-318 www.denso.de info@denso.de

Our literature, data sheets and recommendations represent our best knowledge at the time of printing but are in no way legally binding on us. Values and properties shown in diagrams and tables are

typical properties, which are not subject to any guarantee. Our liability is limited as per our standard terms and conditions of sale. No 02 issue: 07/08 Mastic PF