The document calculates the external pressure on a dish head vessel, determining the deviation (e) cannot exceed 13.125 mm based on the nominal inside diameter of 1050 mm, and also cannot exceed 4.0 mm based on the thickness of 10 mm. It provides the diameter, total length, L/D ratio, thickness to diameter ratio, and determines the chord length is 428 mm based on an arc length of 214 mm which is 0.2 times the outside diameter of 1070 mm.
The document calculates the external pressure on a dish head vessel, determining the deviation (e) cannot exceed 13.125 mm based on the nominal inside diameter of 1050 mm, and also cannot exceed 4.0 mm based on the thickness of 10 mm. It provides the diameter, total length, L/D ratio, thickness to diameter ratio, and determines the chord length is 428 mm based on an arc length of 214 mm which is 0.2 times the outside diameter of 1070 mm.
The document calculates the external pressure on a dish head vessel, determining the deviation (e) cannot exceed 13.125 mm based on the nominal inside diameter of 1050 mm, and also cannot exceed 4.0 mm based on the thickness of 10 mm. It provides the diameter, total length, L/D ratio, thickness to diameter ratio, and determines the chord length is 428 mm based on an arc length of 214 mm which is 0.2 times the outside diameter of 1070 mm.
Corroded Thickness (t )= ts-CA = 10-0 = 10 mm Ts=Nominal Thickness CA= Corrosion Allowance Outside Diameter of Boot Head (D0 )=I.D + 2 * ts = 1050 + (2 * 10) D0 = 1070 mm Total Length (L) = T/L to T/L + (2* h/3) h= I.D/4 mm h= 1050 / 4 = 262.5 mm h/3=262.5/3 = 87.5 mm L= 1600 + (2 * 87.5) L = 1775 mm L/D0 = 1775 / 1070 = 1.658 D0 /t = 1070 / 10 = 107.0 For Head As per UG-81 (a) The Deviation should not be more than 1.25% D Where D is the Nominal inside Diameter Permissible Deviation e = 0.0125 * 1050 e = 13.125 mm As per UG-81 (b) For Head it is considered as 0.5 for L/D0 L/D0= 0.5 e = 0.40 * t = 0.40 * 10 e = 4.0 mm and Arc Length =0.2 * D0 = 0.2 * 1070 = 214 mm Chord Length = 2* Arc Length = 2 * 214 Chord Length = 428 mm