Professional Documents
Culture Documents
SY-A500 Polyurethane Foam Machine
SY-A500 Polyurethane Foam Machine
1.Wall insulation; 2. Roof insulation; 3. Water tank injection 4. Cold storage insulation 5. Ceramic spraying etc.
Injection
Brief introduction
Polyurethane foaming material has many advantages such as insulation,heat proofing,noise proofing and anticorrosive etc.Widely used in many areas.Environmental friendly and energy-saving.The insulation and heat proofing function are better than any other materials.
Working principle
The function of this machine is to extract chemical A and chemical B.Make them pressurized.So both materials combined by high pressure in the gun head and then spray out.
Application
Mainly for construction injection, construction spraying,buffer packaging.
For spraying:Building exterior and interior wall spraying,cold storage spraying, cabinet insulation and noise proofing of car&bus,roof insulation and waterproof,refrigerated trucks and industrial anticorrosive spraying.
For injection:solar water heater,refrigerator,freezer,pipe joints,door-crack padding,products padding&packaging,roller shutter door,security door,road construction,wall noise proofing,landscape modeling etc.
Voltage 2-ph 220V 50Hz requirements 3-ph 380V 50Hz Pneumatic source 0.7-0.9Mpa 1m/min
A,B,C heats Machine size independently 0-80(0-173 Net weight ) Free cleaning
Standard configuration: Main engine:1 unit Spray gun:1 piece Feeding pump:2 pieces Material insulation pipe:15m/set (49.2 feet/set) 1 set of accompanied accessories
4. Buyer can come to factory to be trained.It will take 3-4 days to finish. Whole machine