Equilibrium Sanerios

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Equilibrium Sanerios

Scenario 1

3A

2A

+127kJmol-1

To achieve high equilibrium yield use: High temperature because the forward reaction is endothermic High Pressure because forward reaction produces fewer moles- from 3moles => 2 moles

Why is not higher temperature used? Uneconomical Why is high pressure not used? Health hazards dangerous Uneconomical

Catalyst increases ROR in both direction by proving an alternative route with a lower Ea. This means equilibrium would be reached much faster.

Scenario 2

3A

2A

-336kJmol-1

To achieve high equilibrium yield use: Lower the temperature because the forward reaction is exothermic High Pressure because forward reaction produces fewer moles- from 3moles => 2 moles

Why is a higher temperature used in industry? Faster Rates of Reaction Compromise in Quicker equilibrium reached temperature is made achieve a Why is high pressure not used? to reasonable ROR without reducing Health hazards dangerous yield significantly. Uneconomical

Scenario 3

3A

2A

-336kJmol-1

To achieve high equilibrium yield use: High temperature because the forward reaction is endothermic High Pressure because forward reaction produces fewer moles- from 3moles => 2 moles

Why is not higher temperature used? Uneconomical Why is high pressure not used even though it gives higher yield? This is because there is no significant change in the yield with high pressure.

You might also like