Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Broadcast Products

VTR

Technical Bulletin 20-2003-087


SUBJECT: MANUAL CORRECTIONUPPER DRUM ECCENTRICITY ADJUSTMENT

DATE: March 17, 2003

MODEL:

PVW-2600 PVW-2600P PVW-2650 PVW-2650P PVW-2800 PVW-2800P ALL

DESCRIPTION Correct the following manuals as shown in Figure 1. PVW-2600 Service Manual Volume 1, 1st Edition PVW-2600 Service Manual Volume 1, 1st Edition (Rev.1) PVW-2800 Service Manual Volume 1, 1st Edition PVW-2800 Service Manual Volume 1, 1st Edition (Rev.1) PVW-2800 Service Manual Volume 1, 1st Edition (Rev.2) PVW-2800P Service Manual Volume 1, 1st Edition PVW-2800P Service Manual Volume 1, 1st Edition (Rev.1)

SERIAL NO:

Italicized information in green applies to customers outside the United States.

SECTION 5 REPLACEMENT OF MAJOR PARTS 5-2-1. UPPER DRUM ECCENTRICITY ADJUSTMENT

5-10

6.

Tighten two screws alternately and gradually (tightening torque : 8kgNcm).

(tightening torque : 6 kgfNcm / 58.8x10-2NNm).

Figure 1

BIM03-006

B-BIM03-006-0.FM

Broadcast Products Technical Bulletin 20-2003-087

Page 1 of 2

Correct the PVW-2600P Service Manual Volume 1, 1st Edition as shown in Figure 2.

SECTION 5 REPLACEMENT OF MAJOR PARTS 5-2-1. UPPER DRUM ECCENTRICITY ADJUSTMENT

5-10

6.

Tighten two screws alternately and gradually (tightening torque : 78.5 NNcm {8kgNcm}).

(tightening torque : 6 kgfNcm / 58.8x10-2NNm).

Figure 2 Correct the following manuals as shown in Figure 3. PVW-2650 Service Manual Volume 1, 1st Edition PVW-2650P Service Manual Volume 1, 1st Edition

SECTION 5 REPLACEMENT OF MAJOR PARTS 5-2-1. UPPER DRUM ECCENTRICITY ADJUSTMENT

5-12

6.

Tighten two screws which hold the upper drum alternately and gradually (tightening torque : 78.5x10-2 NNm{8 kgfNcm}).

58.8x10-2 NNm{6 kgfNcm}).

Figure 3

Broadcast Professional Products Asia Sony Australia Broadcast Professional Products Europe Sony Canada Ltd. Sony Electronics Inc. USA Sony Broadcast and Professional Latin America

B-BIM03-006-0.FM

Broadcast Products Technical Bulletin 20-2003-087

Page 2 of 2

You might also like