Professional Documents
Culture Documents
Soal Ujian Ke-2 - Perbaikan Dan Ulang
Soal Ujian Ke-2 - Perbaikan Dan Ulang
2
= -50 x 10
6
mm/mm (plane stress condition,
z
= 0). If the material have E = 200 GPa,
Y
= 140 MPa, and = 0.30, determine : (a). The maximum in-plane shearing strain;
(b). The absolute maximum shearing strain; and (c). Equivalent normal stresses from
Von-Mises Theory and check that wether be equal or less than
Y
.
2. A single gage is cemented to a solid 100 mm diameter steel shaft at an angle = 45
o
with
a line parallel to the axis of the shaft. Knowing that G = 79 GPa, determine the torque T
indicated by a gage reading of 300 x 10
-6
mm/mm.