This document provides specifications for the CRYSTEK CSX3 Model 3.2x5mm ultra miniature SMD crystal operating from 12MHz to 45MHz. Key details include:
- Frequency range of 12MHz to 45MHz with calibration tolerances from ±10ppm to ±100ppm and frequency stability over operating temperature ranges of -10°C to 70°C or -30°C to 85°C.
- Maximum shunt capacitance of 5.0pF, typical drive level of 20uW and maximum of 300uW, and aging rate of less than ±3ppm per year.
- Packaging in 1K tape and reel. Dimensions of
This document provides specifications for the CRYSTEK CSX3 Model 3.2x5mm ultra miniature SMD crystal operating from 12MHz to 45MHz. Key details include:
- Frequency range of 12MHz to 45MHz with calibration tolerances from ±10ppm to ±100ppm and frequency stability over operating temperature ranges of -10°C to 70°C or -30°C to 85°C.
- Maximum shunt capacitance of 5.0pF, typical drive level of 20uW and maximum of 300uW, and aging rate of less than ±3ppm per year.
- Packaging in 1K tape and reel. Dimensions of
This document provides specifications for the CRYSTEK CSX3 Model 3.2x5mm ultra miniature SMD crystal operating from 12MHz to 45MHz. Key details include:
- Frequency range of 12MHz to 45MHz with calibration tolerances from ±10ppm to ±100ppm and frequency stability over operating temperature ranges of -10°C to 70°C or -30°C to 85°C.
- Maximum shunt capacitance of 5.0pF, typical drive level of 20uW and maximum of 300uW, and aging rate of less than ±3ppm per year.
- Packaging in 1K tape and reel. Dimensions of
This document provides specifications for the CRYSTEK CSX3 Model 3.2x5mm ultra miniature SMD crystal operating from 12MHz to 45MHz. Key details include:
- Frequency range of 12MHz to 45MHz with calibration tolerances from ±10ppm to ±100ppm and frequency stability over operating temperature ranges of -10°C to 70°C or -30°C to 85°C.
- Maximum shunt capacitance of 5.0pF, typical drive level of 20uW and maximum of 300uW, and aging rate of less than ±3ppm per year.
- Packaging in 1K tape and reel. Dimensions of
TD-021011 Rev. G Specifications subject to change without notice.
3.2X5 mm Ultra Miniature SMD Crystal
CSX3 Model 12MHz to 45MHz 10ppm to 50ppm 10ppm to 100ppm -10C to 70C -30C to 85C 5.0pF Max 20uW Typical, 300uW Max 3ppm Max 1st/yr see table 1 1K Tape and Reel
Frequency Range: Calibration Tolerance: Frequency Stability: Temperature Range: Storage: Shunt Capacitance: Drive Level: Aging: ESR: Packaging: All dimensions are Max unless otherwise specified. Dimensions inches (mm) Build Your Own P/N CSX3-XXX-XX-Freq Example: CSX3-AB1-18-19.680 = 10ppm at 25C, 25ppm -10 to 70C, Fundamental, 18pF Load Cap, 19.680MHz Frequency Tolerance at 25C A 10 ppm B 25 ppm C 50 ppm (-10 to 70C) (-10 to 70C) (-10 to 70C) (-10 to 70C) (-40 to 85C) (-40 to 85C) (-40 to 85C) 10 ppm 25 ppm 50 ppm 100 ppm 50 ppm 100 ppm 30 ppm A B C D E F G Frequency Stability over Temp Range Load Capacitance S= 10= 14= 16= 18= 20= 22= 25= 32= Series 10pF 14 pF 16 pF 18 pF 20 pF 22 pF 25 pF 32 pF Mode "Blank" or "1" Fundamental 12-39 MHz PIN Signal 1 2 3 4 Crystal GND Crystal GND 12.0 - 20.0 (F) 20.1 - 39.0 (F) Resistance at series resonance Freq. (MHz) Max ESR 50 40 Table 1 Desi gned t o meet t he most demanding space requirements while providing excellent stability. Aging: <3ppm 1st/yr Max Quartz Crystal 46 0.1970.006 (5.00.15) 0.1260.006 (3.20.15) CRYSTEK 25M DC .043 (1.1) 1 3 2 4 Top View .033 (0.85) 0.102 (2.4) 1 Bottom View .047 (1.2) 2 3 4 .055 (1.40) 0.150 (3.8) 0.090 (2.3) 0.051 (1.3) 0.063 (1.6) Suggested Pad Layout L e a d
F r e e R o H S C o m p l i a n t RECOMMENDED REFLOW SOLDERING PROFILE 217C 200C 260C 150C 90 Secs. Max. T E M P E R A T U R E Ramp-Up 3C/Sec Max. Preheat 180 Secs. Max. 8 Minutes Max. 260C for 10 Secs. Max. Critical Temperature Zone Ramp-Down 6C/Sec. NOTE: Reflow Profile with 240C peak also acceptable.