Professional Documents
Culture Documents
Fairy Wings
Fairy Wings
Need
7 - 260 clear
1 - 160 lime
1 - 260 colour to choice
1 - 5" heart colour to choice
Wings
A
Inflate a 260 of any colour, leaving " uninflated. Tie the balloon into a circle. Twist
the ring in half creating two equal loops for the harness.
B
Fully inflate two clear 260s and tie the nozzles together. Twist a 1" bubble at the
end of each and twist the two bubbles together. Wrap the nozzles around the joint
of the harness.
C
Inflate a clear 260, leaving " uninflated. Tie the balloon into a ring. Attach the tied
ends to the joint of the harness.
D
Take the balloon from step C and find the halfway point. Attach the halfway point to
the two bubbles created in step B.
E
At this point, you should have four arcs. Twist a 6" bubble in all four, starting from
the two bubbles created in step B.
F
Twist one short arc and one long arc together at the base of the bubbles made in
step H. Repeat with the other two arcs.
G
Repeat steps B through I for the second wing.
H
Inflate a clear 260 at least 20". Attach the nozzle to the two bubbles from step B.
I
Twist a 12" bubble and attach it to the joint of the harness. Twist two 1" pinch
twists.
J
Twist another 12" bubble and attach it to the second wing at the two bubbles. Cut
and tie any extra balloon.
K
To arrange the wings so they sit properly, the ends of the balloon from step C and
it's matching balloon from the second wing should sit closest to the harness. Bend
the wings to shape.
Wand
L
Inflate a lime 160 full but soft.
M
Twist the 160 in half and make a " pinch twist on each side of the halfway point.
N
Twist a 3" loop twist on each side.
O
Spiral the remaining balloon. Arrange the pinch twists and loop twists so they
alternate.
P
Fully inflate a 5" heart. Attach the nozzle to the middle of the 160.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P