K to 12 Curriculum Guide version as of July 24, 2012 TLE ICT CHS *LO Learning Outcome 1
Kto12 BASIC EDUCATION CURRICULUM
TECHNOLOGY AND LIVELIHOOD EDUCATION INFORMATION AND COMMUNICATION TECHNOLOGY COMPUTER HARDWARE SERVICING (Exploratory) Course Description:
This Module is an exploratory and introductory course which leads to Computer Hardware Servicing National Certificate Level II (NC II). It covers four common competencies that a Grade 7/Grade 8 Technology and Livelihood Education (TLE) student ought to possess, namely: 1) using and maintaining tools, equipment and paraphernalia; 2) performing mensuration and calculation; 3) practicing Occupational Health and Safety (OHS) procedures and; 4) interpreting technical drawing and plans. The preliminaries of this exploratory course include the following: 1) discussion on the relevance of the course; 2) explanation of key concepts relative to the course and; 3) exploration on career opportunities.
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES
Introduction Basic concepts and common competencies in Computer Hardware Servicing Relevance of the course Career opportunities
The learner demonstrates understanding of basic concepts, underlying theories and common competencies in computer hardware servicing.
The learner independently demonstrates basic concepts, theories and common competencies in computer hardware servicing as prescribed in the TESDA Training Regulation.
Explain basic concepts, theories and common competencies in computer hardware servicing Discuss the relevance of the course Explore on opportunities for computer hardware servicing as a career
LESSON 1: USE AND MAINTAIN HAND TOOLS CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES
Hand tools in computer hardware servicing Equipment in computer hardware servicing
The learner demonstrates understanding of hand tools and equipment and accomplishing required forms in computer hardware servicing.
The learner independently prepares hand tools and equipment and accomplish the required forms in computer hardware servicing.
*LO 1. Prepare hand tools and equipment in computer hardware servicing List hand tools and equipment based on job requirement Identify appropriate hand tools and equipment Classify hand tools and equipment according to function and task requirement
K to 12 Curriculum Guide version as of July 24, 2012 TLE ICT CHS *LO Learning Outcome 2 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES
Procedure in accomplishing forms: Job order slips Tools and materials requisition slips Borrowers slip Requisition procedures
*LO 2. Inspect hand tools and equipment received in computer hardware servicing Check list of tools and equipment to be requested per job requirement Inspect the condition of all the requested tools and equipment Assess the hand tools and equipment for proper operation and safety
*LO 3. Use and maintain hand tools, measuring instrument and equipment Perform safety procedures in using hand tools and equipment Follow procedures in cleaning and tightening simple tool repair Identify malfunction, unplanned or unusual events and report to property custodian
LESSON 2: PERFORM CALCULATION AND MENSURATION
Types of components and objects to be measured: Memory Data storage capacity
The learner demonstrates understanding of concepts and underlying principles in performing measurements and calculation.
The learner independently performs accurate measurements and calculation based on a given tasks.
*LO 1. Perform mensuration and calculation identify object/s to be measured
K to 12 Curriculum Guide version as of July 24, 2012 TLE ICT CHS *LO Learning Outcome 3 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES Correct specifications of the relevant sources
adopt correct specifications as specified in the Users Guide Take accurate measurement
Conversion and calculation
*LO 2. Carryout mensuration and calculation Perform calculation needed to complete task using the four mathematical fundamental operation (addition, subtraction, multiplication and division) Employ different techniques in checking accuracy of the computation
LESSON.3: PREPARE AND INTERPRET TECHNICAL DRAWING
Elements Schematic diagram Charts Block diagrams Layout plans Location plans Process and instrumentation diagram Loop diagram System control diagram Basic symbols - Basic electronic symbols
The learner demonstrates understanding of concepts and underlying principles in interpreting technical drawings and work plans in computer hardware servicing.
The learner independently reads and interprets technical drawings and work plans accurately.
*LO 1. Identify different kinds of technical drawings Select technical drawing in accordance with the job requirement Identify required components, assemblies or objects in a PC Interpret flowchart - Types of flowchart
*LO 2. Interpret technical drawing Iidentify the dimension of the key features of the objects depicted in the technical drawing
K to 12 Curriculum Guide version as of July 24, 2012 TLE ICT CHS *LO Learning Outcome 4 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES Interpret the symbols used in the drawing Validate to check equipment in accordance with the standard operating procedure
LESSON 4: PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURE
Identification of hazards and risks control For users and technicians Equipment damage and data lost Environment
The learner demonstrates understanding of concepts and underlying principles of Occupational Health and Safety in relation to health and risk hazards in the workplace.
The learner consistently observes precautionary measures and responds to risks and hazards in the workplace.
*LO 1. Identify hazards and risks Explain hazards and risks in the workplace Identify hazards/risks indicators prescribed by the manufacturer Apply contingency measures in accordance with the Occupational Health and Safety procedures
Computer work station Ergonomics
*LO 2. Evaluate hazards and risks Determine the effects of hazards Identify issues and concerns in workplace requirements set by OHS
Safety regulations in the work place OHS procedures in controlling hazards and risks Methods of controlling hazards and risks
* LO 3 Control hazards and risks Follow OHS procedures for controlling hazards and risks