Professional Documents
Culture Documents
Command To Reset Site
Command To Reset Site
Unblock Sector
Lock sector
Rlstc:cell=<cell>,state=halted;
unLock sector
Rlstc:cell=<cell>,state=active;
Check if the site is down due to power
Rxmfp:mo=rxotg-xx,subord,faulty;
Fault code 12 and 50 means issue is power
Turndown/locked sector
Rlstc:cell=jhn006x,state=halted;
Turnup/unlocked sector
Rlstc:cell=jhn006x,state=Active;
Command to reset radio 5 on tg 137(jka026)
Rxbli:mo=rxotrx-137-5,force,subord;
rxesi:mo=rxotrx-137-5,subord;
rxble:mo=rxotrx-137-5,subord;
//Activate sector
Rxtcp:mo=rxotg-94nms
Rlstc:cell=cow996a,state =active;
Rlcrp:cell=cow966a;
//check individual link on site
rxmsp:mo=rxotg-137,subord;
stdep:dev=rblt3-2256&&-2279;
Command to reset site
RXTCP:MOTY=RXOTG,CELL=JSA038; gcm2119
This gives TG
RXBLI:MO=RXOTG-XX, SUBORD,FORCE;
RXESE:MO=RXOTG-XX,SUBORD;
RXESI:MO=RXOTG-XX,SUBORD;
RXBLE:MO=RXOTG-XX, SUBORD;
Rxasp:moty=rxotg; to see faulty nodes
Rxmsp:mo=rxotg-xx,subord;
Rxtcp:mo=rxotg-xx;
Rxmfp:mo=rxotg-xxsubord,faulty;
Dtstp:dip=225rbl3&2346rb3;
To reset a link/site
Rxtcp:moty=rxotg,cell=jsjxxa; to find TG
rxmop:mo=rxotg-TG#;
rxapp:mo=rxotg-xx; then divide the first RBLT3 NUMBER BY 24 and use the DIP to equal that
number/traffic
dtstp:dip=NUMBERrb3; this tell if the site is working or not.
To block the site use
Rlstp:cell=jsjxxa, state= alted;
To unblock site use
Rlstp:cell=jsjxxa, state=active;
To check status of site use
Rlstp:cell=jsjxxa;
Hgslr:msisdn=18769971105;
Hgslr:imsi=33818010296267;
Rxmop:mo:rxotx-34-8;