This document describes a test case for calculating the reliability of a pumping system. The system pumps water from point A to point B and includes valves and a pump. Failure rate data for the components was obtained from life tests. The document asks to:
1) Calculate the reliability function of the system
2) Determine the failure rates of the components
3) Calculate the probability the system will survive another 10 hours if it already survived 10 hours
This document describes a test case for calculating the reliability of a pumping system. The system pumps water from point A to point B and includes valves and a pump. Failure rate data for the components was obtained from life tests. The document asks to:
1) Calculate the reliability function of the system
2) Determine the failure rates of the components
3) Calculate the probability the system will survive another 10 hours if it already survived 10 hours
This document describes a test case for calculating the reliability of a pumping system. The system pumps water from point A to point B and includes valves and a pump. Failure rate data for the components was obtained from life tests. The document asks to:
1) Calculate the reliability function of the system
2) Determine the failure rates of the components
3) Calculate the probability the system will survive another 10 hours if it already survived 10 hours
Fall 2013 Components & System Reliability 1 L06 System Reliability Test Case Part 1 A pumping system pumps water from point A to point B. The time to failure of all the valves and the pump can be represented by the exponential distributions with failure rates that where obtained by specific life tests. Calculate 1. the reliability function of the system 2. the failure rates 3. the probability that the system will survive another 10h, if it already survived 10h. 2 V-1 V-2 E-1 P-1 Point A P-2 P-4 Point B V-3 P-5 P-3 P-6 L06 System Reliability Test Case Part 2 Valves life test Ten valves are placed under life test which is terminated at t 0 = 850h. Eight components before 850h have elapsed, but the components are replaced when they fail. Failure times obtained are: 183, 318, 412, 432, 553, 680, 689, 748 Pump life test Ten pumps are placed under life test which is terminated when the 8 th component failed at 850h. The components are not replaced when they fail. Failure times obtained are: 183, 318, 412, 432, 553, 680, 689, 748 3 L06 System Reliability Test Case Part 3 The probability that the system will survive another 10h if it already survived 10h. 4 V-1 V-2 E-1 P-1 Point A P-2 P-4 Point B V-3 P-5 P-3 P-6