Scribd Logo
Upload

Welcome to Scribd!

  • Relevant Rounded Indications: 1) 1/10t For T Less Than 3mm 2) 0.4 MM For 3 T 6 (MM) 3) 0.8 MM For 6 T 50 (MM) 4) 1.6 MM For T Greater Than 50mm

    Uploaded by

    hekayat71
    2 views1 page
    The document provides rounding indications for measurements of thickness (t) in millimeters (mm): measurements less than 3mm are rounded to 1/10th of a mm; those between 3-6mm are rounded to 0.4mm; those between 6-10mm are rounded to 0mm; and those greater than 10mm are rounded to 1.6mm.

    Original Description:

    c

    Original Title

    RT-Linear

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    The document provides rounding indications for measurements of thickness (t) in millimeters (mm): measurements less than 3mm are rounded to 1/10th of a mm; those between 3-6mm are rounded to 0.4mm; those between 6-10mm are rounded to 0mm; and those greater than 10mm are rounded to 1.6mm.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as rtf, pdf, or txt
    2 views1 page

    Relevant Rounded Indications: 1) 1/10t For T Less Than 3mm 2) 0.4 MM For 3 T 6 (MM) 3) 0.8 MM For 6 T 50 (MM) 4) 1.6 MM For T Greater Than 50mm

    Uploaded by

    hekayat71
    The document provides rounding indications for measurements of thickness (t) in millimeters (mm): measurements less than 3mm are rounded to 1/10th of a mm; those between 3-6mm are rounded to 0.4mm; those between 6-10mm are rounded to 0mm; and those greater than 10mm are rounded to 1.6mm.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as rtf, pdf, or txt
    of 1

    * Relevant Rounded indications:

    1) 1/10t for t less than 3mm


    2) 0.4 mm for 3<t<6 (mm)
    3) 0. mm for 6<t<!0 (mm)
    4) 1.6 mm for t "reater than !0mm #.$.%ava&oli

    You might also like