Professional Documents
Culture Documents
BAC Evaporative Condenser Design
BAC Evaporative Condenser Design
NUMBER
PC2-1327-2436-40
85,850
119,550
17,010
2'-9 1/4"
18'-0 1/8"
PC2-1461-2436-60
86,250
119,950
17,110
2'-9 1/4"
18'-0 1/8"
PC2-1562-2436-80
86,370
120,070
17,140
2'-9 1/4"
18'-0 1/8"
PC2-1600-2436-60
97,780
132,140
19,990
3'-6 1/2"
18'-9 3/8"
PC2-1715-2436-80
97,900
132,260
20,020
3'-6 1/2"
18'-9 3/8"
PC2-1804-2436-100
98,900
133,260
20,270
3'-6 1/2"
18'-9 3/8"
PC2-1884-2436-120
98,900
133,260
20,270
3'-6 1/2"
18'-9 3/8"
PC2-1701-2436-60
109,350
144,370
22,880
4'-3 3/4"
19'-6 5/8"
PC2-2004-2436-120
110,470
145,490
23,160
4'-3 3/4"
19'-6 5/8"
PC2-1958-2436-100
116,430
151,820
24,650
4'-3 3/4"
19'-6 5/8"
PC2-2193-2436-160
116,910
152,300
24,770
4'-3 3/4"
19'-6 5/8"
PC2-1920-2436-80
127,560
163,670
27,430
5'-1"
20'-3 7/8"
PC2-2120-2436-120
128,560
164,670
27,680
5'-1"
20'-3 7/8"
PC2-2277-2436-160
129,040
165,150
27,800
5'-1"
20'-3 7/8"
PC2-2402-2436-200
129,280
165,390
27,860
5'-1"
20'-3 7/8"
PC2-2506-2436-240
129,680
165,790
27,960
5'-1"
20'-3 7/8"
Notes
1) Drawings are not to scale. All dimensions are
in feet and inches. Weights are in pounds and
do not include options and accessories.
2) Unless otherwise indicated, connections 3"
and smaller are MPT. Connections 4" and
larger are grooved to suit a mechanical
coupling and beveled for welding.
3) Dimensions showing location of coil
connections are approximate and should not be
used for prefabrication of connecting piping.
4) For weight loadings and support
requirements, refer to the suggested steel
support drawing.
5) The area above the discharge must be
unobstructed.
6) Piping must not be supported by the unit inlet
or outlet connections.
7) M = Motor location
8) Heaviest section is a cell's mechanical
section mounted to coil casing section.
Unit Print
PC2 Quad Cell 24'x36'