The Microlab Dx-19 series power splitters are 2, 3, or 4-way reactive dividers that evenly split high power cellular signals with minimal loss between 698-2700 MHz. They have IP65-rated aluminum housings, support up to 500W average power, and have very low insertion loss and PIM. The compact design allows for simple wall mounting using supplied clips.
The Microlab Dx-19 series power splitters are 2, 3, or 4-way reactive dividers that evenly split high power cellular signals with minimal loss between 698-2700 MHz. They have IP65-rated aluminum housings, support up to 500W average power, and have very low insertion loss and PIM. The compact design allows for simple wall mounting using supplied clips.
The Microlab Dx-19 series power splitters are 2, 3, or 4-way reactive dividers that evenly split high power cellular signals with minimal loss between 698-2700 MHz. They have IP65-rated aluminum housings, support up to 500W average power, and have very low insertion loss and PIM. The compact design allows for simple wall mounting using supplied clips.
Power Splitters, Dx-19 series 2, 3 & 4 way Block & Tube Style, Reactive Dividers Super wideband, 698 - 2,700 MHz, N or 7-16 Rev. B Multiple-Band Frequency Cellular, UMTS & WiFi Up to 500W Average Power Minimal RF Insertion Loss High Reliability, IP65 Low Specified PIM RoHS compliant Low Cost Design 1.04 [26.5] (.71 [18.0]) B A .63 [16.0] n 1.02 [26.0] C J 4 J 3 J 2 J 1 MAX Microlab Model Dx-19 series of 2, 3 and 4 way Power Splitters available in 7-16 DIN and N versions, has been designed to evenly split high power cellular signals with minimal reflections or loss. The design allows simple attachment to wall using the supplied clips. The wide frequency range allows use with multiband antennas and leaky cable systems. With few solder joints and an air dielectric, the loss has been minimized and reliability enhanced. Other similar splitters are available with 380-2700 and 698-3800 MHz frequen- cy ranges. (01/13) 4 Way and 2 Way Splitters Version in N-type shown Frequency Range: 698 - 2700 MHz Impedance: 50 nominal Power: N model 300W avg. 7-16 DIN 500W avg. PIM, Passive IM: <-150 dBc (2 tones at +43 dBm) Environment: IP65, -35C to +85C RoHS compliant Finish: Connectors: (f) Triplate Housing: Passivated aluminum Mounting: Clips supplied Model Number/Conn No. of Split Insertion Amplitude Input DIN Weight, nom. N Weight, nom. 7-16 DIN N Ways Loss Loss Balance, typ. VSWR lbs. (kg) lbs. (kg) D2-19FD D2-19FN 2 3 dB <0.1 dB 0.20dB <1.20:1 0.68 (0.31) 0.51 (0.23) D3-19FD D3-19FN 3 4.8 dB <0.1 dB 0.25dB <1.25:1 0.84 (0.38) 0.60 (0.27) D4-19FD D4-19FN 4 6 dB <0.1 dB 0.40dB <1.30:1 0.97 (0.44) 0.66 (0.30) $ Saver Product Line Dimensions , Inches [mm] D2-19FN D3-19FN D4-19FN Add for FD A 7.75 [197] 8.94 [227] 8.94 [227] 0.07 [1.7] B 7.01 [178] 7.52 [191] 7.52 [191] same C 0.56 [14.2] 0.56 [14.2] 0.56 [14.2] same Note: 2 way Splitter delete J3 & J4 3 way Splitter delete J4 4 way Splitter as drawn. This dimension with 7-16 mm connectors is 0.78 [19.7]. 1.12 [28.5]