This document provides specifications for a split body valve with full threaded stud bolts and nuts. The valve has a NACE rating with an operating temperature range of -29 to 120 degrees Celsius. It has Kel-F rings, insert seats, an A182 F51 ball and trim, A182 F51 stem rod, and Carbograph 'O' rings and packing. It complies with AGIP and manufacturer standards and notes anti-static and fire safe requirements. Dimensions, weights, test pressures and other details are provided for valve sizes from 1/2 to 36 inches.
This document provides specifications for a split body valve with full threaded stud bolts and nuts. The valve has a NACE rating with an operating temperature range of -29 to 120 degrees Celsius. It has Kel-F rings, insert seats, an A182 F51 ball and trim, A182 F51 stem rod, and Carbograph 'O' rings and packing. It complies with AGIP and manufacturer standards and notes anti-static and fire safe requirements. Dimensions, weights, test pressures and other details are provided for valve sizes from 1/2 to 36 inches.
This document provides specifications for a split body valve with full threaded stud bolts and nuts. The valve has a NACE rating with an operating temperature range of -29 to 120 degrees Celsius. It has Kel-F rings, insert seats, an A182 F51 ball and trim, A182 F51 stem rod, and Carbograph 'O' rings and packing. It complies with AGIP and manufacturer standards and notes anti-static and fire safe requirements. Dimensions, weights, test pressures and other details are provided for valve sizes from 1/2 to 36 inches.
SPLIT BODY VALVE ITEM VB 637 AG 6V1 Bore: FULL SERVICE : NACE MIN / MAX OPERATING TEMP. Deg.C: -29 : +120 STUD BOLTS FULL THREADED ASME B 1.1 A 193 GR.2HM BODY/ENDS NUTS HEAVY HEX. THDD. ASME B 1.1 A 194 GR.2HM JOINT THDD. GASKET GRAPHITE
RINGS KEL-F SEATS INSERT BALL A 182 F51 TRIM ROD A 182 F51 STEM 'O' RING / PACKING CARBOGRAPH SPRING FIRE SAFE BS 6755 FIRE SAFE GASKET GRAPHITE NOTES: 1) Valves shall comply with specification of this document and AGIP 15801.PIP.MEC.SDS. 34) The values " * " are less than ASME code B 16.34.These values are defined by seats materials. 2) Valves shall comply with specifications of this document, AGIP 15801.PIP.MEC.SDS and Manufacturer STD. RATING 5) Antistatic device must be provided. C bar C bar 7) Designations " non corrosive", " corrosive" and " NACE" are clarified on AGIP 15801.PIP.MEC.SDS. -29 255.3 21) The design shall ensure that the stem shall not be capable of ejection from the valve while the 38 255.3 valve under pressure by the removal of the stem seal retainer. 50 250.4 32) Welded body construction is not acceptable. 100 231.9 150 180.0* DIMENSIONS (mm), WEIGHTS (kg) 200 150.0* VALVE SIZE (inch) 1/2 3/4 1 1 2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36 SW 216 250 259 250 END TO END
Tollerances +/-1.6 TEST BORE DIAMETER min. 14 19 25 38 HYDROSTATIC bar HANDWHEEL Center to top 77 81 97 111 SHELL 383.0 Diameter SEAT 280.8 OPERATOR WRENCH AIR bar WEIGHT SW 2.8 3.2 4.9 8.7 SEAT 5.5 (appr.) BALL VALVES VB 637 AG 6V RATING : 1500 lb ASME B16.34 VALVE ENDS : SOCKET WELDING Sheet Prep'd 15.6.1996 BODY / ENDS MATERIAL : ASTM A 182 F51 (UNS S31803) 1 / 1 Rev . 1 This document is Company property. The Company lawfully reserves all rights. 15376.PIP.MEC.STD Agip Internal Normalization M O D . M E C . V L I .