Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

INTRODUCTION

I


INTRODUCTION
Aviation is field in engineering in which there are two sub-sections. One section is
related to defense while the other is related to civil transportation. In aviation
the safety of a passenger and good is very crucial. Therefore for this safety
should be proper maintenance of the air vehicle. It is thus maintained by the
Civil Aviation Authority of the country.
The Industrial training was carried out in Air Dynasty Heli Services Pvt. Ltd., a
helicopter charter company. It has served as a commercial airliner for more
than 20 year. It has four helicopters which are maintained on daily basis for
maintaining airworthiness. During the training period three of the aircrafts were
operated through TIA (Tribhuwan International Airport, Kathmandu, Nepal)
KTM and the other from Pokhara Domestic Airport, Pokhara, Nepal.
During such maintenance all three of the aircrafts operating from TIA were
reported to have two TBOs approaching and stiffening of the axial compressor.
For this purpose as a Trainee Engineer I was suggested the following procedure
to adopt for understanding the training better.


Study
Civil Aviation
Governing
Bodies
The Company
Aircraft
Airframe &
Engine
Practical Training
Maintenance &
Inspection
Every Aircraft
Identifying
defects & Solving
by refering MM
Assembly &
Disassembly
Gound Run &
Testing

You might also like