Professional Documents
Culture Documents
OlympusXZ-1 Full Guide
OlympusXZ-1 Full Guide
XZ-1
DIGITAL CAMERA
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for
future reference.
We recommend that you take test shots to get accustomed to your camera before taking important photographs.
In the interest of continually improving our products, Olympus reserves the right to update or modify information
contained in this manual.
The screen and camera illustrations shown in this manual were produced during the development stages and may
differ from the actual product.
2 EN
Step
1
Checking the contents of the box
Step
2
Preparing the Camera
Preparing the Camera (p. 13)
Step
3
Shooting and Playing Back Images
Shooting, Viewing, and Erasing (p. 20)
Step
4
How to Use the Camera
Camera Settings (p. 3)
Step
5
Printing
Direct printing (PictBridge) (p. 64)
Print Reservations (DPOF) (p. 68)
Contents
Names of Parts ............................................... 9
Preparing the Camera .................................. 13
Shooting, Viewing, and Erasing ................. 20
Using Shooting Modes ................................ 28
Using Shooting Functions .......................... 36
Menus for Shooting Functions ................... 45
Strap
Digital camera
Lens cap and
lens cap strap
LI-50B lithium
ion battery
USB cable AV cable OLYMPUS Setup CD-ROM
Other accessories not shown: warranty card
Contents may vary depending on purchase location.
or
F-2AC
USB-AC adapter
3 EN
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Zoom lever (p. 22, 26)
Shutter button (p. 21)
R button (record movies) (p. 21)
q button (switch between shooting and
playback) (p. 21, 23)
m button (p. 6)
INFO button (change information display)
(p. 23, 26, 36, 38, 40, 44)
Mode dial
Use the mode dial to select the shooting mode.
Indicator
A iAUTO (p. 28)
P Program Auto (p. 20)
A Aperture Priority (p. 29)
S Shutter Priority (p. 29)
M Manual Shooting (p. 30)
C Custom Mode Setup (p. 30)
h Low Light (p. 30)
SCN Scene Mode (p. 31)
ART Art Filter (p. 34)
4 EN
Wheel controller
F (up) /
F (exposure compensation) button (p. 38)
G (down) /
jY (sequential shooting/Self-timer) button (p. 38) /
D button (erase) (p. 25)
H (left) /
& (macro) button (p. 36) /
P (AF target) button (p. 37)
I (right) /
# (ash) button (p. 37)
A button
(p. 4, 5)
The symbols FGHI displayed for image selections
and settings indicate that the wheel controller (see
above) is to be used.
Single Print More
Print
4/30 10 10
11/02/26 11/02/26 100-0004 100-0004 12:30 12:30
Y M D Time
2011 Y/M/D . . 02 26 12 30
X
Cancel Set
Operation guides displayed at the bottom of the screen
indicate that the m button, A button, or zoom
lever should be used.
44
22
Sel. Image
Erase/Cancel
4/30
Set
Operation guide
Reset Photo Mode
Picture Mode
WB
XWSettings
Flash Settings
Bracket Settings
Digital Zoom
Image Stabilizer
Natural
Auto
Off
On
Camera Menu 1/2
Exit Set
Operation guide
5 EN
Using the Live Control
To display the live control, press A during shooting. The live control can be used to adjust shooting functions
while previewing their effects in the monitor.
The live control is not displayed in A mode.
See Menus for Shooting Functions (p. 7) for a list of the functions that can be adjusted.
P AUTO
WB
AUTO
WB
WB Auto WB Auto
L N
h
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
Live control display
Functions
Options
1 Press A to display the live control.
2 Use FG to select a function and HI to
highlight options, then press A to choose
the highlighted option.
The highlighted option takes effect when A is
pressed or if no operations are performed for
a short time.
Some menu items may not be available at certain
combinations of settings or in some shooting
modes.
P AUTO
WB
AUTO
WB
WB Auto WB Auto
L N
h
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
Cursor
Name of currently
selected item
Cursor
6 EN
1 Press the m button.
The menus are displayed.
Reset Photo Mode
Picture Mode
WB
XWSettings
Flash Settings
Bracket Settings
Digital Zoom
Image Stabilizer
Natural
Auto
Off
On
Camera Menu 1/2
Exit Set
2 Press H to highlight the page tabs. Use
FG to select the desired page tab and
press I.
Custom Mode Setup
Format
Backup
USB Connection
qPower On
Sound Settings
File Name
Pixel Mapping
Storage
Yes
Reset
Setup Menu 1/2
Exit Set
Custom Mode Setup
Format
Backup
USB Connection
qPower On
Sound Settings
File Name
Pixel Mapping
Storage
Yes
Reset
Setup Menu 1/2
Exit Set
Page tab Submenu 1
Press the m button during shooting or playback to display the menus. The menus provide access to a variety
of shooting and playback functions as well as to other camera settings, including display options and the time and
date.
Using the Menus
The menus can be used to adjust a variety of settings.
7 EN
Menu Index
Menus for Shooting Functions
ISO .........................................p. 39
Picture mode .........................p. 39
White balance .........................p. 40
Sequential shooting/
Self-timer ................................p. 38
Aspect ratio.............................p. 41
Image size (still images) .........p. 41
Frame size (movies) ...............p. 42
Reset Photo Mode ..................p. 45
Picture Mode ..........................p. 45
WB ..........................................p. 46
X W Settings ..........................p. 47
Flash Settings .........................p. 48
Bracket Settings .....................p. 48
Digital Zoom ...........................p. 49
Image Stabilizer ......................p. 49
Movie Resolution ....................p. 51
R (movies) ..............................p. 51
Flash .......................................p. 37
Flash compensation ...............p. 43
Metering..................................p. 43
ND lter ...................................p. 44
AF mode .................................p. 36
Face priority ............................p. 44
1 (conversion lens) ...............p. 49
AF Illuminat. ...........................p. 50
Rec View ................................p. 50
Info Off ....................................p. 50
Panorama ...............................p. 51
P AUTO
ISO
AUTO
ISO
F5.0 F5.0 +2.0 +2.0 1/100 1/100 ISO Auto ISO Auto
L N
h
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
100 125 160 200 250 320
Reset Photo Mode
Picture Mode
WB
XWSettings
Flash Settings
Bracket Settings
Digital Zoom
Image Stabilizer
Natural
Auto
Off
On
Camera Menu 1/2
Exit Set
Exit
Movie Resolution
R On
Movie Menu 1/1
Set
HD
Live control
Camera menu
Movie menu
8 EN
Menus for Playback, Editing, and Printing Functions
Custom Mode Setup ...............p. 57
Memory Format/Format ..........p. 57
Backup....................................p. 57
USB Connection .....................p. 58
q Power On .........................p. 58
Sound Settings .......................p. 58
File Name ...............................p. 59
Menus for Other Camera Settings
Slideshow ...............................p. 52
Edit ...................................p. 52, 54
Print Order ..............................p. 55
Erase ......................................p. 55
? (Protect) ..............................p. 56
Rotate .....................................p. 56
Pixel Mapping .........................p. 59
s (Monitor) ..........................p. 59
TV Out ....................................p. 60
Sleep ......................................p. 62
W (Language) ......................p. 62
X (Date/time) .........................p. 62
World Time .............................p. 63
Slideshow
Edit
Print Order
Erase
?
Playback Menu 1/1
Exit Set
Rotate
Playback menu
Custom Mode Setup
Format
Backup
USB Connection
qPower On
Sound Settings
File Name
Pixel Mapping
Storage
Yes
Reset
Setup Menu 1/2
Exit Set
Setup menu
9 EN
Names of Parts
Camera unit
1 Strap eyelet................................................... p. 13
2 Connector cover ................... p. 15, 17, 60, 61, 64
3 Multi-connector ........................... p. 15, 17, 60, 64
4 HDMI micro connector .................................. p. 61
5 Self-timer lamp.............................................. p. 38
AF illuminator ................................................ p. 50
6 Lens ........................................................ p. 76, 91
7 Control ring ....................................... p. 27, 29, 30
8 Tripod socket
9 Speaker
10 Battery/card compartment lock ..................... p. 13
11 Battery/card compartment cover................... p. 13
The Control Ring
Rotate the control ring to adjust
settings during shooting.
Shooting mode Affected setting
P / h ISO sensitivity
A / M Aperture
S Shutter speed
SCN Scene mode
ART Art lter mode
C Same as original shooting mode
1
5
1
6
8
7
9
2
10
11
3
4
10 EN
1 Flash ................................................. p. 37, 43, 48
2 Hot shoe ....................................................... p. 80
3 Hot shoe cover
4 Flash switch .................................................. p. 37
5 Accessory port ........................................ p. 80, 81
6 Monitor .............................................. p. 20, 59, 71
7 n button ........................................ p. 18, 20
Indicator lamp ................................... p. 14, 15, 17
8 Zoom lever .............................................. p. 22, 26
9 Mode dial ........................................................ p. 3
10 Shutter button ............................................... p. 21
11 Microphone ............................................. p. 51, 54
12 R button (record movies) ............................. p. 21
13 q button (switch between shooting and
playback) ................................................ p. 21, 23
14 Wheel controller .............................................. p. 4
F (exposure compensation) button .......... p. 38
jY (sequential shooting/Self-timer)
button ........................................................ p. 38
D button (erase) ....................................... p. 25
& (macro) button ...................................... p. 36
P (AF target) button............................... p. 37
# (ash) button ......................................... p. 37
15 A button (OK) ............................................ p. 4, 5
16 INFO button (change information display)
...................................... p. 23, 26, 36, 38, 40, 44
17 m button ................................................... p. 6
1
3
4
6
5
2
7
8
9
12
13
16
14
15
17
10
11
11 EN
Monitor
Shooting mode display
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
P
01:02:03 01:02:03
h -2.0 -2.0
OFF OFF
ON ON RC RC
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
11
AUTO
ISO
AUTO
ISO
1 2 3 4 5 6 7 8
18 17 19 20 21 22
23
24
25
26
27
28
29 9
10
11
12
13
15
14
16
1 Battery check ................................................ p. 18
2 Writing data to card ....................................... p. 78
3 Image stabilization ........................................ p. 49
4 Flash (RC) .................................................... p. 80
5 Conversion lens ...................................... p. 49, 81
6 World time ..................................................... p. 63
7 AF target mark ........................................ p. 21, 37
8 Histogram ..................................................... p. 23
9 ISO................................................................ p. 39
10 Picture mode ................................................ p. 39
11 White balance ............................................... p. 40
12 Sequential shooting/Self-timer ...................... p. 38
BKT ............................................................... p. 48
13 Aspect ratio ................................................... p. 41
14 Image size (still images) ............................... p. 41
15 Frame size (movies) ..................................... p. 42
16 Continuous recording length (movies) .......... p. 79
17 Number of storable pictures (still images)
.............................................................. p. 20, 79
18 Current memory ............................................ p. 78
19 Top: Flash compensation indicator ............... p. 43
Bottom: Exposure compensation indicator ... p. 38
20 Exposure compensation ............................... p. 38
21 Aperture value .................................. p. 21, 29, 30
22 Shutter speed ................................... p. 21, 29, 30
23 Shooting mode.......................................... p. 3, 28
24 Face priority .................................................. p. 44
25 AF mode ....................................................... p. 36
26 ND lter ......................................................... p. 44
27 Metering ........................................................ p. 43
28 Flash compensation...................................... p. 43
29 Flash ............................................................. p. 37
Flash standby/ash charge ........................... p. 71
12 EN
Playback mode display
Normal display Detailed display
P
RR
GG
BB
11/02/26 11/02/26
1/100 1/100 F1.8 F1.8 +2.0 +2.0 ISO400 ISO400
A0 A0 G0 G0
12:30 12:30
4/30 10 10
L N 4:3 -2.0 -2.0 AUTO
WB
AUTO
WB
NATURAL 100-0004
1 2 345 6
11
10
9
8
7
12 13
17
18
19
20
16
15
14
11/02/26 11/02/26 12:30 12:30
4/30 10 10
1 2 345 6
11
1 Battery check ................................................ p. 18
2 Print reservation/number of prints........ p. 68/p. 66
3 Adding sound .......................................... p. 51, 54
4 Protect .......................................................... p. 56
5 Current memory ............................................ p. 78
6 Frame number/total number of images (still
images) ......................................................... p. 23
Elapsed time/total recording time (movies)... p. 24
7 Histogram ..................................................... p. 23
8 ISO................................................................ p. 39
9 White balance ............................................... p. 40
White balance compensation........................ p. 47
10 File number
11 Date and time ............................................... p. 18
12 Flash compensation...................................... p. 43
13 Metering ........................................................ p. 43
14 Aspect ratio ................................................... p. 41
15 Picture mode................................................. p. 39
16 Image size (still images) ............................... p. 41
Frame size (movies) ..................................... p. 42
17 Shooting mode................................................ p. 3
18 Shutter speed ................................... p. 21, 29, 30
19 Aperture value .................................. p. 21, 29, 30
20 Exposure compensation ............................... p. 38
13 EN
Preparing the Camera
Attaching the camera strap and lens
cap
1 2
3
4
5
Repeat for the second
eyelet.
15 EN
Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
A Setup dialog will be displayed.
Windows Vista/Windows 7
An Autorun dialog will be displayed. Click
OLYMPUS Setup to display the Setup dialog.
If the Setup dialog is not displayed, select My
Computer (Windows XP) or Computer (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
OLYMPUS Setup window and then double-click
Launcher.exe.
If a User Account Control dialog is displayed, click
Yes or Continue.
2
Follow the on-screen instructions on your
computer.
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Leave the camera
connected to the computer until the battery has
charged, then disconnect and reconnect the camera.
16 EN
4
Install OLYMPUS Viewer 2 and [ib] computer
software.
Check the system requirements before beginning
installation.
Click the OLYMPUS Viewer 2 or OLYMPUS ib
button and follow the on-screen instructions to
install the software.
OLYMPUS Viewer 2
Operating
System
Windows XP (Service Pack 2 or later) /
Windows Vista / Windows 7
Processor Pentium 4 1.3 GHz or better
RAM
1 GB or more (2 GB or more
recommended)
Free Hard
Drive Space
1 GB or more
Monitor
Settings
1024 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)
[ib]
Operating
System
Windows XP (Service Pack 2 or later) /
Windows Vista / Windows 7
Processor
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required
for movies)
RAM
512 MB or more (1 GB or more
recommended)
(1 GB or more required for movies 2 GB
or more recommended)
Free Hard
Drive Space
1 GB or more
Monitor
Settings
1024 768 pixels or more
Minimum 65,536 colors (16,770,000
colors recommended)
Graphics
A minimum of 64 MB video RAM with
DirectX 9 or later.
* See online help for information on using the software.
5
Install the camera manual.
Click the Camera Instruction Manual button and
follow the on-screen instructions.
Macintosh
1
Insert the supplied CD in a CD-ROM drive.
Double-click the CD (OLYMPUS Setup) icon on
the desktop.
Double-click the Setup icon to display the Setup
dialog.
17 EN
2
Install OLYMPUS Viewer 2.
Check the system requirements before beginning
installation.
Click the OLYMPUS Viewer 2 button and follow
the on-screen instructions to install the software.
OLYMPUS Viewer 2
Operating
System
Mac OS X v10.4.11v10.6
Processor Intel Core Solo/Duo 1.5 GHz or better
RAM
1 GB or more (2 GB or more
recommended)
Free Hard
Drive Space
1 GB or more
Monitor
Settings
1024 768 pixels or more
Minimum 32,000 colors (16,770,000
colors recommended)
* Other languages can be selected from the language
combo box. For information on using the software, see
online help.
3
Copy the camera manual.
Click the Camera Instruction Manual button to
open the folder containing the camera manuals.
Copy the manual for your language to the
computer.
Charging the battery with the supplied
USB-AC adapter
The included F-2AC USB-AC adapter (with an AC
cable or plug-in type; hereafter referred to as USB-AC
adapter) differs depending on the region where you
purchased the camera. If you received a plug-in type
USB-AC adapter, plug it directly into an AC outlet.
The supplied USB-AC adapter is for charging and
playback only. Do not take pictures while the USB-AC
adapter is connected.
19 EN
3
Press I to save the setting for [Y].
Y M D Time
2011 Y/M/D . . - - - - - - - -
X
Cancel
4
As in Steps 2 and 3, use FGHI to set
[M] (month), [D] (day), [Time] (hours and
minutes), and [Y/M/D] (date order).
For a more accurate setting, press A when the time
signal hits 00 seconds while setting the minutes.
The menus can be used to change the selected date
and time. [X] (Date/time) (p. 62)
5
Use HI to select your home time zone and
press A.
Use FG to turn daylight saving time ([Summer])
on or off.
Summer
11.02.26 12:30
Seoul
Tokyo
Set
The menus can be used to change the selected time
zone. [World Time] (p. 63)
6
Use FGHI to select your language and
press A.
The language can be changed from the menus.
[W] (Language) (p. 62)
20 EN
Shooting, Viewing, and Erasing
Shooting with the optimum aperture
value and shutter speed
[Program Auto]
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
1
Remove the lens cap.
2
Rotate the mode dial to P and press the
n button to turn on the camera.
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
P
01:02:03 01:02:03
h -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
AUTO
ISO
AUTO
ISO
Monitor (standby mode screen)
Number of storable still pictures (p. 79)
[Program Auto]
indicator
Press the n button again to turn off the camera.
3
Hold the camera and compose the shot.
Horizontal grip
Vertical grip
Monitor
When holding the camera, take care not to cover the
ash with your ngers, etc.
21 EN
4
Press the shutter button halfway down to
focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark ashes red. Try focusing again.
1/100 1/100 F5.0 F5.0 P
AF target mark
Press halfway
Shutter speed Aperture value
Focusing (p. 73)
5
To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
Press fully
1/100 1/100 F5.0 F5.0 P
Image review screen
To view images during shooting
Pressing the q button enables playback of images. To
return to shooting, either press the q button or press the
shutter button halfway down.
Shooting movies
1
Press the R button to start recording.
Lights red during recording
Recording time
2:18 2:18
REC P
The shooting mode selected for still photography
applies to movies (some shooting modes have no
effect).
The camera may not correctly display the recording
time in [Art Filter] mode (p. 34). Movies recorded in
[n] (Diorama) mode play back at high speed; during
recording, the recording time is adjusted to reect the
playback time and advances more slowly than usual.
2
Press the R button again to end recording.
Sound will also be recorded.
22 EN
Using zoom
Use the zoom lever to frame the subject.
Zoom out (W) Zoom in (T)
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
P
01:02:03 01:02:03
h -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
AUTO
ISO
AUTO
ISO
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
P
01:02:03 01:02:03
h -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
AUTO
ISO
AUTO
ISO
Zoom bar
Optical zoom: 4
Digital zoom: 4
To take larger images [Digital Zoom]
The type and amount of zoom can be identied from
the appearance of the zoom bar. The display differs
depending on the options selected for [Digital Zoom]
(p. 49) and image size (p. 41).
[Off] selected for [Digital Zoom]:
Image size Zoom bar
36482736
Optical zoom range
Other
Image zoomed and cropped.
*1
[On] selected for [Digital Zoom]:
Image size Zoom bar
36482736
Digital zoom range
Other
Image zoomed and
cropped.
*1
Digital zoom range
*1
If an image size is less than the full resolution after
reaching the maximum optical zoom, the camera will
automatically resize and crop the image to the selected
image size and enter the digital zoom range if [Digital
Zoom] is [On].
Photographs taken with the zoom bar displayed in
red may appear grainy.
23 EN
Changing the shooting information
display
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
1
Press the INFO button.
The displayed shooting information changes in
the order shown below each time the button is
pressed. Shooting mode display (p. 11)
No information
Detailed
1/1000 1/1000 F5.0 F5.0 0.0 0.0
L N
AF AF
P
01:02:03 01:02:03
i -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
AUTO
ISO
AUTO
ISO
Normal
1/1000 1/1000 F5.0 F5.0 0.0 0.0
L N
AF AF
P
01:02:03 01:02:03
i -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
AUTO
ISO
AUTO
ISO
Reading a histogram
If the peak is too far toward this part of the
frame, photos will be mostly too bright.
If the peak is too far toward
this part of the frame, photos
will be mostly too dark.
The green area shows the
distribution of brightness at the
center of the frame.
Viewing images
1
Press the q button.
11/02/26 11/02/26 12:30 12:30
4/30
Playback image
Number of frames/Total number of images
2
Use the wheel controller to select an image.
You can also use HI.
View previous
image
View next
image
Keep rotating the wheel controller to scroll rapidly
forward or backward through images. You can also
keep HI pressed.
The display size of the images can be changed.
Index view and close-up view (p. 26)
24 EN
To play sound recordings
To play sound recorded with an image, select the image
and press A. A H icon appears on images with which
sound has been recorded.
[R] (still images) (p. 54)
During audio playback
00:12/00:34 00:12/00:34
To play back movies
Select a movie and press A.
Movie
11/02/26 11/02/26 Movie Play 12:30 12:30
4/30
Operations during movie playback
00:12/00:34 00:12/00:34
Elapsed time/
Total recording time
During playback
Pausing and
resuming
playback
Press A to pause playback. To
resume playback during pause, fast
forward, or rewind, press A.
Fast forward
Press I to fast forward. Press I
again to increase the fast forward
speed.
Rewind
Press H to rewind. The rewinding
speed increases each time H is
pressed.
Adjusting the
volume
Use the wheel controller or FG to
adjust the volume.
25 EN
Operations during pausing playback
During pause
00:14/00:34 00:14/00:34
Cueing
Press F to display the rst frame
and press G to display the last
frame.
Advancing and
rewinding one
frame at a time
Using the wheel controller
Rotate the wheel controller to
advance or rewind a frame at
a time. Keep turning the wheel
controller for continuous advance
or rewind.
Using HI
Press I or H to advance or
rewind one frame at a time. Keep
I or H pressed for continuous
advance or rewind.
Resuming
playback
Press A to resume playback.
To stop movie playback
Press the m button.
Erasing images during playback
(Single image erase)
1
Display the image you want to erase and
press G (D).
Erase
Yes
No
Cancel Set
2
Use FG to highlight [Yes] and press A.
[All Erase] (p. 55) and [Sel. Image] (p. 55) can be
used to erase multiple images at the same time.
26 EN
Index view and close-up view
Index view enables quick selection of a desired image.
Close-up view (up to 10 magnication) allows checking
of image details.
1
Rotate the zoom lever.
Zoom out (W) Zoom in (T)
Single-image view Close-up view
11/02/26 11/02/26 12:30 12:30
4/30
11/02/26 11/02/26 12:30 12:30
4/30 W
T
W T
Index view
11/02/26 11/02/26 12:30 12:30
44
22
22
To select an image in index view
Use FGHI to select an image, and press A to
display the selected image in single-image view.
To scroll an image in close-up view
Use FGHI to move the viewing area.
Changing the image information
display
Shooting information settings displayed on the screen can
be changed.
1
Press the INFO button.
The displayed image information changes in
the order shown below each time the button is
pressed.
No information
Detailed
Normal
11/02/26 11/02/26 12:30 12:30
4/30 10 10
P
RR
GG
BB
11/02/26 11/02/26
1/1000 1/1000 F5.0 F5.0 0.0 0.0 ISO200 ISO200
A0 A0 G0 G0
12:30 12:30
L N 4:3 -2.0 -2.0 AUTO
WB
AUTO
WB
NATURAL 100-0004
4/30 10 10
Reading a histogram (p. 23)
27 EN
Viewing a series of images
Only the rst image in each series shot with the following
functions is displayed.
[Sequential], [High-Speed1], [High-Speed2]
1
Display the rst image in the series.
Viewing images (p. 23)
First image in series
11/02/26 11/02/26 12:30 12:30
1/10
Automatic playback
Press A to start automatic playback of all the images in
the current series.
Index view
Use the control ring to switch between index and normal
views.
11/02/26 11/02/26 12:30 12:30
1/10
11/02/26 11/02/26 12:30 12:30
Changes to [? (Protect)] (p. 56), [Rotate] (p. 56),
[Print Order] (p. 55) and [Erase] (p. 55) made when
the rst frame is displayed apply to all images in
the series. Select index view to apply changes to
individual frames.
Viewing panoramas
You can pan across panoramas created using [Auto] or
[Manual].
Creating panoramic images ([~ Panorama]) (p. 32)
1
Display a panorama image during playback.
Viewing images (p. 23)
11/02/26 11/02/26 12:30 12:30
4/30
Replay
2
Press A.
Current viewing area
Controls for panorama playback
Zoom in/zoom out: Press A to pause playback, then
use the zoom lever to zoom in and out.
Pan direction: Press FGHI to pause playback and
pan the image in the selected direction.
Pause: Press A.
Resume: Press A.
End playback: Press the m button.
28 EN
Using Shooting Modes
To change the shooting mode
The shooting mode (A, P, A, S, M, C, h, SCN,
ART) can be selected using the mode dial.
Mode dial (p. 3)
The default settings of the function are highlighted in
.
Shooting with automatic settings
(A iAUTO)
According to the scene, the camera automatically selects
the optimal shooting mode from [Portrait]/[Landscape]/
[Night+Portrait]/[Sport]/[Macro]/[Low Light]. This is a fully
automatic mode that allows the user to take pictures using
the best mode for the shooting scene simply by pressing
the shutter button.
1
Rotate the mode dial to A.
1/100 1/100 F5.0 F5.0
01:02:03 01:02:03
ON ON
L N
h
4:3
HD
11
The icon changes
depending on the
scene that the camera
automatically selects.
In some cases, the camera may not select the
desired shooting mode.
When the camera cannot identify which is the optimal
mode, [Program Auto] will be selected.
There are some limitations on settings in A mode.
Using the live guide
The live guide can be used to change settings in A
mode.
Guide items
Change Color Saturation
Change Color Image
Change Brightness
Blur Background
Shooting Tips
29 EN
4 Press the shutter button to take a picture.
To clear the live guide from the display, press the
m button.
YN+RAW is automatically selected when a RAW
option is chosen using the live guide.
Live guide settings are not applied to RAW images.
Pictures may appear grainy at some live guide setting
levels.
Changes to live guide setting levels may not be
visible in the monitor.
The ash can not be used with the live guide.
Changes to live guide options cancel previous
changes.
Choosing live guide settings that exceed the limits of
the camera exposure meters may result in pictures
that are over- or under-exposed.
Choosing aperture
(A Aperture Priority)
In mode A, you choose the aperture and let the camera
automatically adjust shutter speed for optimal exposure.
1
Rotate the mode dial to A.
2
Use the control ring to choose the aperture.
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
A
01:02:03 01:02:03
h -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
F5.0 F5.0 4.5 4.5 5.6 5.6
11
Aperture value
If the picture is over- or under-exposed, the aperture
is displayed in red.
33 EN
4 Repeat Step 3 to take a third shot.
After the third shot is taken, the camera
automatically processes the shots and the
combined panorama image is displayed.
To exit without creating a panorama, press the m
button.
If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual]
1 Use HI to specify at which edge the next picture is
to be connected.
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
01:02:03 01:02:03
h -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
Pan direction
2 Press the shutter button to take the rst shot.
1st frame
Cancel Save
11 22
Joins
34 EN
Taking pictures using [PC]
1 Use FGHI to select a pan direction.
2 Press the shutter button to take the rst shot, and then
compose the second shot.
1/100 1/100 F5.0 F5.0 +2.0 +2.0
L N
AF AF
01:02:03 01:02:03
h -2.0 -2.0
ON ON
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
OFF OFF
11
Exit
11 22
Before rst shot
After rst shot
After the rst shot, the area shown in white
reappears on the side of the display opposite the
pan direction. Frame subsequent photographs so
that they overlap with the image in the monitor.
3 Repeat Step 2 until the desired number of shots is
taken, and then press the A or m button.
Panoramas can include up to 10 shots.
See the on-line help for the computer application for
information on creating panoramas.
41 EN
Choosing the aspect ratio
Choose the aspect ratio (ratio of width to height) for new
photographs. Choose from [4:3] (standard), [16:9], [3:2],
or [6:6] according to your creative intent.
1
Press A to display the live control and use
FG to highlight the aspect ratio.
L N
P
h
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
4:3 16:9 3:2 6:6
36482736 36482736
Aspect ratio
2
Use HI to highlight an option and press A
to select.
JPEG images are cropped to the selected aspect
ratio; RAW images, however, are not cropped but are
instead saved with information on the selected aspect
ratio.
When RAW images are played back, the selected
aspect ratio is shown by a frame.
Selecting the size of still images
1
Press A to display the live control and use
FG to highlight the image size.
L N
P
h
4:3
AUTO
ISO
AUTO
ISO
AUTO
WB
AUTO
WB
HD
36482736 36482736
L N L F RAW MF 11 S F RAW +
L F
Image size
2
Use HI to highlight an option and press A
to select.
Supported record modes
Choose from RAW and four JPEG modes. Choose a
RAW+JPEG option to record both a RAW and a JPEG
image with each shot.
42 EN
Image size and recording options
JPEG modes combine image size (Y, X, and W) and
compression ratio (F and N).
Image size
Compression
rate
Pixel
count
Application
F
(Fine)
N
(Normal)
Y (Large) YF
*1
YN
*1
36482736
Choose
according
to the size
at which the
image will be
printed.
X (Medium) XF XN
*1
32002400
25601920
16001200
W (Small) WF WN
*1
1280960
1024768
640480
Choose for
websites or
images that will
be printed at a
small size.
*1
Default.
You can choose the dimensions and compression
of X and W images. [X W Settings] (p. 47)
Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC/SDXC memory cards (p. 79)
45 EN
For information on using the menus, see Using the Menus (p. 6).
Menus for Shooting Functions
The default settings of the function are highlighted in .
Restoring the shooting functions to the default settings [Reset Photo Mode]
z (Camera menu) Reset Photo Mode
Submenu 2 Application
Yes
Restores the following menu functions to the default settings.
AF mode (p. 36)
Sequential shooting/Self-timer (p. 38)
Live control items (p. 39 to 44)
Menu functions in
z
(Camera menu)/A (Movie menu) (p. 45 to 51)
No The current settings will not be changed.
Selecting the color tone of the image [Picture Mode]
z (Camera menu) Picture Mode
Submenu 2 Application
Vivid Produces vivid colors.
Natural Produces natural colors.
Muted Produces at tones.
Portrait Produces beautiful skin tones.
Monotone Produces black and white tones.
This item can also be accessed from the live control. Processing options (p. 39)
46 EN
Image processing options
Highlight an option in the shooting menu and press I to make adjustments to individual settings.
Submenu 3 Submenu 4 Application
Contrast Adjust contrast.
Sharpness Adjust sharpness.
Gradation Auto/Normal/High Key/Low Key Choose a tone range.
Saturation
*1
Adjust the vividness of colors.
B&W Filter
*2
N:Neutral/Ye:Yellow/Or:Orange/
R:Red/G:Green
Take pictures in black and white. Colors in the original subject
corresponding to the selected lter appear brighter in the black-
and-white image, while complementary colors appear darker.
Pict. Tone
*2
N:Neutral/S:Sepia/B:Blue/
P:Purple/G:Green
Choose a tint for monochrome images.
*1
[Monotone] not included.
*2
[Monotone] only.
Changes to contrast have no effect at settings other than [Normal].
These settings can not be adjusted using the live control.
Adjusting to a natural color scheme [WB]
z (Camera menu) WB
Submenu 2 Application
WB Auto The camera automatically adjusts the white balance according to the shooting scene.
Sunny For shooting outdoors under a clear sky.
Shadow For photographing outdoor subjects in the shade on sunny days.
Cloudy For shooting outdoors under a cloudy sky.
Incandescent For shooting under tungsten lighting.
Fluorescent For shooting under white uorescent lighting (ofces, etc.).
Underwater For underwater photography.
One Touch
Choose when a white or gray subject can be used to measure white balance and the subject is
under mixed lighting or lit by an unknown type of ash or other light source.
This item can also be accessed from the live control. Adjusting to a natural color scheme (white balance) (p. 40)
47 EN
For information on using the menus, see Using the Menus (p. 6).
White balance compensation
White balance compensation can be used to ne-tune each of the preset white balance options.
1 Highlight a white balance option and press I.
2 Use HI to highlight an axis and use FG to choose a value.
A (amberblue):
Choose positive values for warmer colors, negative values for colder colors.
G (greenmagenta):
Choose positive values for greener hues, negative values for a magenta cast.
3 Press A when settings are complete.
White balance compensation can not be adjusted using the live control.
Choosing an image size (X or W) and compression [X W Settings]
z (Camera menu) X W Settings
Submenu 2 Submenu 3 Application
Pixel Count
X: 32002400/25601920/16001200
W: 1280960/1024768/640480
Choose the size of images in pixels.
Compression
Fine Choose for ne-quality images.
Normal Choose for normal-quality images.
Selecting the size of still images (p. 41)
48 EN
Adjusting ash settings [Flash Settings]
z (Camera menu) Flash Settings
Submenu 2 Submenu 3 Application
#Slow Off/On Choose whether to use slow shutter speeds when using the ash.
# Sync # Sync 1/# Sync 2
Control ash timing. (If [# Sync 1] is selected, the ash will re
immediately after the shutter opens. If [# Sync 2] is selected, the ash
will re just before the shutter closes so that moving light sources appear
to be followed by streams of light.)
# RC Mode Off/On Choose whether to use a wireless ash unit.
Note that when [On] for [# RC Mode], pictures will only be taken if a wireless ash unit is available.
Choosing the bracketing increment and number of shots [Bracket Settings]
z (Camera menu) Bracket Settings
Submenu 2 Application
AE BKT
*1
Off/3f 0.3EV/3f 0.7EV/
3f 1.0EV/3f 1.3EV/3f 1.7EV
Vary exposure over a sequence of three shots. (The camera takes three
shots while the shutter button is pressed all the way down, the rst at the
metered exposure value, and the second under and the third over the
metered value by the selected amount.)
WB BKT
A-B (Amber Blue):
Off/3f 2Step/3f 4Step/
3f 6Step
G-M (Green Magenta):
Off/3f 2Step/3f 4Step/
3f 6Step
Each time a picture is taken, the camera creates three images, each with
a different hue (white balance) to A-B, or G-M direction.
*1
Exposure is modied by varying shutter speed and aperture (mode P), shutter speed (mode A), or aperture (mode S).
No pictures will be taken if there is insufcient space on the memory card for all the pictures in the bracketing
sequence.
The bracketing increment is added to the value selected for exposure or white balance compensation.
49 EN
For information on using the menus, see Using the Menus (p. 6).
Shooting at higher magnications than
optical zoom [Digital Zoom]
z (Camera menu) Digital Zoom
Submenu 2 Application
Off Disable digital zoom.
On Enable digital zoom.
[Digital Zoom] is not available when [Super Macro]
(p. 36) is selected.
The option selected for [Digital Zoom] affects the
appearance of the zoom bar.
To take larger images (p. 22)
Reducing the blur caused by the
camera shake when shooting
[Image Stabilizer]
z (Camera menu) Image Stabilizer
Submenu 2 Application
Off
The image stabilizer is deactivated.
This is recommended when shooting
with the camera xed in place on a
tripod or other stable surface.
On The image stabilizer is activated.
If [On] is selected for [Image Stabilizer], the camera
may make noise when the shutter button is pressed.
Image stabilization may have no effect if camera
shake is too severe.
When the shutter speed is extremely slow, such as
when pictures are taken at night, [Image Stabilizer]
(still images) may not be as effective.
Taking pictures with a conversion lens
[1]
z (Camera menu) 1
Submenu 2 Application
Off
Select when taking pictures without a
conversion lens.
TCON-17
Select when taking pictures with a
designated optional conversion lens.
When a conversion lens is attached, light from the
built-in ash can cause vignetting where shadows
from the conversion lens appear on the images.
When a conversion lens is attached, the camera may
take extra time to focus.
Conversion lens adapter CLA-12 (available
separately) is required to attach the conversion lens
to the camera.
50 EN
Using the AF illuminator to focus on
poorly-lit subjects [AF Illuminat.]
z (Camera menu) AF Illuminat.
Submenu 2 Application
Off The AF illuminator is not used.
On
When the shutter button is pressed
halfway down, the AF illuminator
turns on to aid focusing.
AF illuminator
Viewing the image immediately after
shooting [Rec View]
z (Camera menu) Rec View
Submenu 2 Application
Off
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
On
The image being recorded is
displayed. This allows the user to
make a brief check of the image that
was just taken.
Even when set to [On], you can resume shooting
while the image is displayed.
Displaying indicators [Info Off]
z (Camera menu) Info Off
Submenu 2 Application
10 sec
Indicators automatically clear from
the display if no operations are
performed for 10 seconds.
Hold
Indicators are always displayed
during shooting.
Indicators that are always displayed may burn in to
the monitor. Monitor (p. 84)
51 EN
For information on using the menus, see Using the Menus (p. 6).
Panorama options [Panorama]
z (Camera menu) Panorama
Submenu 1 Application
Auto
Three frames are taken and
combined by the camera. The user
only composes the shots so that the
target marks and pointers overlap,
and the camera automatically
releases the shutter.
Manual
Three frames are taken and
combined by the camera. The user
composes the shots using the guide
frame and manually releases the
shutter.
PC
The frames that were taken are
combined into a panorama image
using the PC software.
For details on installing the PC software, see
Charging the battery and setting up using the
supplied CD (p. 14).
Image size (p. 41) is xed at 16001200 when [Auto]
or [Manual] is selected.
The focus, exposure (p. 38), zoom position (p. 22),
and white balance (p. 40) are locked at the rst
frame.
The ash (p. 37) is xed to $ (Flash Off) mode.
Shooting panoramas
Creating panoramic images ([~ Panorama]) (p. 32)
Choosing movie frame size
[Movie Resolution]
A (Movie menu) Movie Resolution
Submenu 2 Application
HD Quality
Shoot high denition movies with a
frame size of 1280 720.
SD Quality
Shoot standard denition movies with
a frame size of 640 480.
Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
SD/SDHC/SDXC memory cards (p. 79)
This item can also be accessed from the live control.
Choosing a frame size for movies (p. 42)
Recording sound when shooting
movies [R]
A (Movie menu) R
Submenu 2 Application
Off No sound is recorded.
On Sound is recorded.
52 EN
Menus for Playback, Editing, and Printing Functions
Playing back pictures automatically
[Slideshow]
q (Playback menu) Slideshow
Submenu 2 Submenu 3 Application
Start Start the slideshow.
BGM
Off/
Cosmic/
Breeze/
Mellow/
Dreamy/
Urban
Select background
music.
Slide
All/Still Picture/
Movie
Select the content
to be included in the
slideshow.
Slide Interval 210 seconds
Choose the interval
before the next slide is
displayed.
Movie Interval Full/Short
Choose whether to
display entire movies or
only a portion of each
movie.
During a slideshow, press I to advance one frame,
H to go back one frame.
Retouching photographs
[RAW Data Edit]/[JPEG Edit]
q (Playback menu) Edit
RAW Data Edit/JPEG Edit
1 Display the image to be edited and press Q.
[RAW Data Edit] is displayed if the picture is a
RAW image, [JPEG Edit] if it is a JPEG image.
2 Highlight [RAW Data Edit] or [JPEG Edit] and press
Q.
[RAW Data Edit]
Create a JPEG copy of a RAW image.
The JPEG copy is processed using the settings
currently stored in the camera. Adjust camera settings
before choosing this option.
53 EN
For information on using the menus, see Using the Menus (p. 6).
[JPEG Edit]
Choose from the following options:
Submenu 2 Application
Shadow Adj Brighten dark backlit subjects.
Redeye Fix
*1
Reduce red-eye in pictures taken with
the ash.
P
*2
Crop images.
Aspect
*2
Change the aspect ratio from 4:3
(standard) to [3:2], [16:9], or [6:6].
After selecting an aspect ratio, use
FGHI to position the crop.
Black & White Convert images to black and white.
Sepia Convert images to sepia.
Saturation Adjust the vividness of colors.
Q
*3
Convert images to 1280 960, 640
480, or 320 240.
e-Portrait
*1
Make the skin of portrait subjects
more smooth and translucent.
*1
Not available with some images.
*2
Applies only to images with an aspect ratio of 4:3
(standard).
*3
Images with an aspect ratio other than 4:3 (standard)
are converted to the closest available size. Sizes larger
than the original size are not avaialble.
[JPEG Edit] is not available if there is insufcient
space on the memory card or with RAW images,
images that have been processed on a computer, or
images recorded with another make of camera.
Retouching red-eye in pictures taken with
the ash [Redeye Fix]
1 Select an image using HI and press A.
The edited copy is saved to a separate le.
This option may have no effect with some images.
The quality of the retouched copy may be lower than
the original.
Cropping images [P]
1 Select an image using HI and press A.
2 Size the crop using the zoom lever and use FGHI
to position the crop.
Crop
Set
3 Press A once you have selected the crop.
The edited copy is saved to a separate le.
54 EN
Adjusting vividness [Saturation]
1 Select an image using HI and press A.
2 Use FG to choose the amount of saturation and
press A. The effect can be previewed in the monitor.
3 Use FG to highlight [Yes] and press A.
The edited copy is saved to a separate le.
Resizing images [Q]
Submenu 3 Application
1280960
Copy a large image at a size suitable
for printing at post-card sizes.
640480
Copy a large image at a size suitable
for e-mail or the web.
320240
1 Select an image using HI and press A.
2 Use FG to highlight a size and press A.
The edited copy is saved to a separate le.
Adding sound to still pictures [R]
q (Playback menu) Edit R
Submenu 2 Application
No No sound is recorded.
R Start
Sound can be recorded for up to
30 seconds while a photograph is
displayed, allowing you to record
comments or impressions about
the image.
Erase
Delete sound recorded with an
image.
[R Start]
1 Select an image using HI.
2 Point the microphone at the sound source.
Microphone
3 Use FG to highlight [R Start], and press A.
Recording starts.
[Erase]
1 Use HI to select an image marked with a H icon.
2 Use FG to highlight [Erase], and press A.
The sound is deleted.
55 EN
For information on using the menus, see Using the Menus (p. 6).
Saving print settings to the image data
[Print Order]
q (Playback menu) Print Order
Print Reservations (DPOF) (p. 68)
Print reservation can be set only for still images that
are recorded to the card.
Erasing images [Erase]
q (Playback menu) Erase
Submenu 1 Application
All Erase
All images in the internal memory or
card will be erased.
Sel. Image
Images are individually selected and
erased.
Erase Deletes the image displayed.
Images in internal memory can only be erased when
no memory card is inserted.
Images will only be erased from a memory card if it is
currently inserted in the camera.
Protected images cannot be erased.
To individually select and erase images
[Sel. Image]
1 Use FG to highlight [Sel. Image], and press A.
2 Use FGHI to display the image to be erased and
press A to add a R mark to the image.
Rotate the zoom lever to T to display a single
frame display. Rotate the zoom lever to W to return
to the index view.
44
22
Sel. Image
Erase/Cancel
4/30
R mark
3 Repeat Step 2 to select the images to be erased,
and then press the m button to erase the selected
images.
4 Use FG to highlight [Yes] and press A.
The images with a R mark are erased.
To erase all images [All Erase]
1 Use FG to highlight [All Erase] and press A.
2 Use FG to highlight [Yes] and press A.
56 EN
Protecting images [?]
q (Playback menu) ?
Protected images cannot be erased by [Erase] (p. 25,
55), [Sel. Image], or [All Erase] (p. 55), but all images
are erased by [Memory Format]/[Format] (p. 57).
1 Use HI to select an image.
2 Press A.
Press A again to cancel the settings.
3 If necessary, repeat Steps 1 and 2 to protect other
images, and press the m button.
Rotating images [Rotate]
q (Playback menu) Rotate
1 Use HI to select an image.
2 Press A to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the m button.
The new picture orientations will be saved even after
the power is turned off.
57 EN
For information on using the menus, see Using the Menus (p. 6).
Menus for Other Camera Settings
Saving custom settings
[Custom Mode Setup]
x (Setup menu) Custom Mode Setup
Submenu 2 Application
Set Save current settings.
Reset
*1
Delete saved settings.
*1
Settings revert to mode P.
Erasing data completely
[Memory Format]/[Format]
x (Setup menu) Memory Format/Format
Before formatting, check that no important data is left
in the internal memory or card.
Cards must be formatted with this camera before
rst use or after being used with other cameras or
computers.
Submenu 2 Application
Yes
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
No Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
to the card [Backup]
x (Setup menu) Backup
Submenu 2 Application
Yes
Backs up image data in the internal
memory to the card.
No Cancels the backup.
It takes some time to back up data. Check that
the battery has sufcient power before starting the
backup.
58 EN
Selecting a method for connecting the
camera to other devices
[USB Connection]
x (Setup menu) USB Connection
Submenu 2 Application
Auto
USB options are displayed when
the camera is connected to another
device.
Storage
The camera is treated as a Mass
Storage device.
MTP
Select when transferring images to
a computer running Windows Vista
or Windows 7 without using the
supplied software.
Print
Select when connecting to a
PictBridge-compatible printer.
System requirements
Windows
Windows XP (Service Pack 1 or later) /
Windows Vista / Windows 7
Macintosh Mac OS X v10.3 or later
Even in the case of computers with USB ports,
operation is not guaranteed if:
The USB ports are not built-in but were added
using an expansion board or card
The operating system is not factory installed or the
computer is home built
60 EN
Viewing images on a TV [TV Out]
x (Setup menu) TV Out
Different countries and regions use different video signal standards. Before connecting the camera, choose a video
signal standard that matches that used by the TV.
Submenu 2 Submenu 3 Application
Video Out
NTSC
Choose when connecting the camera to TVs in countries or regions
where NTSC is used (e.g., North America, Taiwan, Korea, and Japan).
PAL
Choose when connecting the camera to TVs in countries or regions
where PAL is used (e.g., Europe and China).
HDMI Out 480p/576p / 720p / 1080i Choose an HDMI output format.
HDMI Control
Off Playback operations are performed using camera controls.
On Playback operations are performed using the TV remote control.
Camera factory defaults vary with the country or region of sale.
Viewing images on a TV
Using an AV cable
1 Match the camera video signal format ([NTSC]/[PAL]) to that used by the TV.
2 Connect the camera to the TV.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
AV cable (supplied)
Multi-connector
Connector cover
61 EN
For information on using the menus, see Using the Menus (p. 6).
Using an HDMI cable
1 Match the camera digital signal format ([480p/576p]/[720p]/[1080i]) to that used by the TV.
2 Connect the camera to the TV.
The [1080i] option gives priority to the 1080i HDMI output. If the TV is not set up for 1080i input, the camera changes
the format rst to 720p and if this is not supported then to 480p and nally to 576p. For information on changing TV
HDMI input settings, see to the instruction manual provided with the TV.
Do not connect the HDMI cable when the camera is connected to a computer or other device using the USB cable.
Connect to the HDMI
connector on the TV.
HDMI micro connector
CB-HD1 type D HDMI cable (sold
separately)
Connector cover
Type D (CB-HD1)
Type C
3 Turn the TV on and select the HDMI input to which the camera is connected.
See the instruction manual provided with your TV for more information.
4 Turn the camera on and use HI to view images.
Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.
Images and other information may be cropped for display on the TV.
62 EN
Using a remote control
1 Select [On] for [HDMI Control] and turn the camera off.
2 Connect the camera to the TV using an HDMI cable.
Using an HDMI cable (p. 61)
3 First turn on the TV, and then turn on the camera.
Follow the on-screen guide displayed by the TV to
operate the camera.
With some TVs, operations cannot be performed with
the TV remote control even though the operation
guide is displayed on the screen.
If operations cannot be performed with the TV remote
control, set [HDMI Control] to [Off] and use the
controls on the camera.
Reducing power consumption between
shots [Sleep]
x (Setup menu) Sleep
Submenu 2 Application
20sec/1min/3min/
5min
The monitor turns off automatically
to save battery power when no
operations are performed (sleep
mode). Choose the delay before the
camera enters sleep mode.
If no operations are performed for about 12 minutes
after the camera enters sleep mode, the camera will
turn off automatically.
Canceling sleep mode
Press the shutter button or an arrow key or rotate the
mode dial.
68 EN
Print Reservations (DPOF
*1
)
In print reservations, the number of prints and date imprint
option are saved in the image on the card. This enables
easy printing at a printer or print shop supporting DPOF
by using only the print reservations on the card without a
computer or a camera.
*1
DPOF is a standard for storing automatic printout
information from digital cameras.
Print reservations can be set only for the images
stored on the card. Insert a card with recorded
images before making print reservations.
DPOF reservations set by another DPOF device
cannot be changed by this camera. Make changes
using the original device. Making new DPOF
reservations with this camera will erase the
reservations made by the other device.
DPOF print reservations can be made for up to 999
images per card.
Single-frame print reservations [<]
1
Display the setup menu.
Using the Menus (p. 6)
2
In the q (playback) menu, highlight [Print
Order] and then press A.
<
U
Print Order
Set Exit
3
Use FG to highlight [<] and press A.
4/30
11/02/26 11/02/26 100-0004 100-0004 12:30 12:30
Set
0
69 EN
4
Use HI to select the image for print
reservation. Use FG to select the quantity.
Press A.
Set Back
No
Time
Date
X
5
Use FG to highlight a [X] (date print)
screen option and press A.
Submenu 2 Application
No This prints the image only.
Date
This prints the image with the
shooting date.
Time
This prints the image with the
shooting time.
Set Back
Print Order
Set
Cancel
1 ( 1) 1 ( 1)
6
Use FG to highlight [Set] and press A.
Reserving one print each of all images
on the card [U]
1
Follow Steps 1 and 2 in [<] (p. 68).
2
Use FG to highlight [U] and press A.
3
Follow Steps 5 and 6 in [<].
Resetting all print reservation data
1
Follow Steps 1 and 2 in [<] (p. 68).
2
Use FG to highlight either [<] or [U], and
press A.
Reset
Keep
Print Ordered
Print Order Setting
Back Set
3
Use FG to highlight [Reset] and press A.
70 EN
Resetting the print reservation data
for selected images
1
Follow Steps 1 and 2 in [<] (p. 68).
2
Use FG to highlight [<] and press A.
3
Use FG to highlight [Keep] and press A.
4
Use HI to select the image with the print
reservation you want to cancel. Use FG to
set the print quantity to 0.
5
If necessary, repeat Step 4, and then press A
when nished.
6
Use FG to highlight a [X] (date print)
screen option and press A.
The settings are applied to the remaining images
with the print reservation data.
7
Use FG to highlight [Set] and press A.
71 EN
Usage Tips
If the camera does not work as intended, or if an error
message is displayed on the screen, and you are unsure
of what to do, refer to the information below to x the
problem(s).
Troubleshooting
Battery
The camera does not work even when batteries are
installed.
Insert recharged batteries in the correct direction.
Inserting the battery and the SD/SDHC/SDXC
memory card (sold separately) (p. 13), Charging
the battery and setting up using the supplied CD
(p. 14), Charging the battery with the supplied
USB-AC adapter (p. 17)
Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
Card/Internal memory
An error message is displayed.
Error message (p. 72)
Shutter button
No picture is taken when the shutter button is
pressed.
Cancel sleep mode.
If no operations are performed for the specied
time when the camera is on, the camera will
enter sleep mode and the monitor will turn off
automatically. While the camera is in sleep mode,
pressing the shutter button will have no effect; to
restore normal operation, operate the zoom lever
or other camera controls. If no operations are
performed for some time after the camera enters
sleep mode, the camera will turn off automatically.
Use the n button to turn the camera on.
Press the q button to switch to the shooting
mode.
Wait until #(ash charge) stops blinking before
taking pictures.
Monitor
Difcult to see.
Condensation
*1
may have occurred. Turn off the
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
*1
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
Vertical lines appear on the screen.
This condition may occur when the camera is
pointed at an extremely bright subject under a clear
sky and so on. The lines do not appear, however,
in the nal image.
Light is caught in the picture.
Shooting with ash in dark situations results in an
image with many ash reections on dust in the air.
72 EN
Date and time function
Date and time settings return to the default setting.
If the batteries are removed and left out of the
camera for about a day
*2
, the date and time
settings return to the default setting, and must
be reset.
*2
The time until the date and time settings return to
the default setting varies depending on how long
the batteries have been loaded.
Date, time, time zone, and language (p. 18)
Miscellaneous
The camera makes a noise when taking pictures.
The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
Error message
When one of the messages below is displayed on the
monitor, check the corrective action.
Error message Corrective action
Card Error
Card problem
Insert a new card.
Write Protect
Card problem
The card write-protect switch is
set to the LOCK side. Release
the switch.
Memory Full
Internal memory problem
Insert a card.
Erase unwanted images.
*1
Card Full
Card problem
Replace the card.
Erase unwanted images.
*1
74 EN
Object with no vertical lines
*1
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
When objects are at different
distances
Fast-moving objects
The subject is not in the center of
the frame
Camera shake
Taking pictures without camera shake
Taking pictures using [Image Stabilizer] (p. 49)
Using the C (Sport) option in SCN mode
(p. 31)
The C (Sport) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a ash cannot be used.
Selecting the ISO sensitivity (p. 39)
Exposure (brightness)
Taking pictures with the right brightness
Taking pictures using [Fill In] (p. 37) ash
A subject against backlight is brightened.
Taking pictures using exposure compensation
(p. 38)
Adjust the brightness while viewing the screen for
taking the picture. Normally, taking pictures of white
subjects (such as snow) results in images that are
darker than the actual subject. Use the exposure
compensation to adjust in the positive (+) direction
to express whites as they appear. When taking
pictures of black subjects, on the other hand, it is
effective to adjust in the negative (-) direction.
75 EN
Color hue
Taking pictures with colors at the same shade as
they appear
Taking pictures by selecting white balance
(p. 40, 46)
Best results in most environments can normally
be obtained with the [WB Auto] setting, but for
some subjects, you should try experimenting
with different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
articial light settings, and so on.)
Image quality
Taking sharper pictures
Taking pictures with the optical zoom
Avoid using digital zoom (p. 22, 49) to take
pictures.
Taking pictures at a low ISO sensitivity
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy. The resulting image
is grainier than with low ISO sensitivity as well.
Selecting the ISO sensitivity (p. 39)
Batteries
Making batteries last longer
Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
Repeatedly pressing the shutter button
halfway
Repeatedly using the zoom
Choosing the delay before the camera enters
sleep mode
[Sleep] (p. 62)
Playback/Editing tips
Playback
Playing images in the internal memory and card
Remove the card when playing pictures in the
internal memory
To remove the SD/SDHC/SDXC memory card
(p. 14)
76 EN
Appendix
Camera care
Exterior
Wipe gently with a soft cloth. If the camera is very dirty,
soak the cloth in mild soapy water and wring well. Wipe
the camera with the damp cloth and then dry it with a
dry cloth. If you have used the camera at the beach,
use a cloth soaked in clean water and wrung well.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial blower, then
wipe gently with a lens cleaner.
Battery/USB-AC adapter
Wipe gently with a soft, dry cloth.
Do not use strong solvents such as benzene or
alcohol, or chemically treated cloth.
Mold may form on the lens surface if the lens is left
dirty.
Storage
When storing the camera for extended periods, remove
the battery, USB-AC adapter and card, and keep in a
cool, dry place that is well ventilated.
Periodically insert the battery and test the camera
functions.
Avoid leaving the camera in places where chemical
products are handled since this may result in
corrosion.
77 EN
Connecting the camera to a computer
The battery can be charged by connecting the camera to
a computer.
Using an optional USB-AC adapter
An F-3AC USB-AC adapter (available separately) is
recommended if the camera will be used for extended
periods.
Note that the power cable supplied with the USB-AC
adapter is for use exclusively with the USB-AC adapter.
Do not use with other devices.
Using your USB-AC adapter abroad
The USB-AC adapter can be used in most home
electrical sources within the range of 100 V to 240 V AC
(50/60Hz) around the world. However, depending on the
country or area you are in, the AC wall outlet may be
shaped differently and the USB-AC adapter may require
a plug adapter to match the wall outlet. For details, ask
at your local electrical shop or travel agent.
Do not use travel voltage converters as they could
damage your USB-AC adapter.
81 EN
Flash control can only be performed by manually setting the ash to the ISO sensitivity and aperture values selected
with the camera. Flash brightness can be adjusted by adjusting either ISO sensitivity or aperture.
Use a ash with an angle of illumination suited to the lens. Angle of illumination is usually expressed using 35-mm
format equivalent focal lengths.
Conversion lens (sold separately)
Conversion lens Conversion lens adapter
TCON-17 CLA-12
Microphone set (SEMA-1) (sold separately)
Produces higher-quality recordings than the cameras built-in microphone. The microphone can be placed at a distance
from the camera to avoid recording ambient sounds or wind noise. Third-party commercial microphones can also be
used depending on your creative intent (power supplied via 3.5 mm stereo mini-plug). The microphone set attaches to
the camera hot shoe and accessory port.
Microphones connected directly to the microphone adapter will cast shadows in photographs taken using the
cameras built-in ash. This can be prevented by connecting the microphone using the supplied microphone cable.
Remote cable (RM-UC1) (sold separately)
Use when the slightest camera movement can result in blurred pictures, for example for macro or bulb photography. The
remote cable attaches via the camera multi-connector.
Water-resistant protector (PT-050) (sold separately)
Use when taking photographs under water.
To take underwater photos (p. 32), To lock the focus distance for underwater shoots (AF lock) (p. 32),
[Underwater] (p. 40)
82 EN
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS SERVICE
PERSONNEL.
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
DANGER If the product is used without observing
the information given under this symbol,
serious injury or death may result.
WARNING If the product is used without observing
the information given under this symbol,
injury or death may result.
CAUTION If the product is used without observing
the information given under this symbol,
minor personal injury, damage to the
equipment, or loss of valuable data may
result.
WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT
TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
General Precautions
Read All Instructions Before you use the product, read all
operating instructions. Save all manuals and documentation
for future reference.
Cleaning Always unplug this product from the wall outlet
before cleaning. Use only a damp cloth for cleaning. Never
use any type of liquid or aerosol cleaner, or any type of
organic solvent to clean this product.
Attachments For your safety, and to avoid damaging the
product, use only accessories recommended by Olympus.
Water and Moisture For precautions on products with
weatherproof designs, read the weatherproong sections.
Location To avoid damage to the product, mount the product
securely on a stable tripod, stand, or bracket.
Power Source Connect this product only to the power
source described on the product label.
Lightning If a lightning storm occurs while using a USB-AC
adapter, remove it from the wall outlet immediately.
Foreign Objects To avoid personal injury, never insert a
metal object into the product.
Heat Never use or store this product near any heat source
such as a radiator, heat register, stove, or any type of
equipment or appliance that generates heat, including stereo
ampliers.
Handling the Camera
WARNING
Do not use the camera near ammable or explosive gases.
Do not use the ash and LED (such as the AF illuminator)
on people (infants, small children, etc.) at close range.
You must be at least 1 m (3 ft.) away from the faces of your
subjects. Firing the ash too close to the subjects eyes could
cause a momentary loss of vision.
Keep young children and infants away from the camera.
Always use and store the camera out of the reach of young
children and infants to prevent the following dangerous
situations which could cause serious injury:
Becoming entangled in the camera strap, causing
strangulation.
Accidentally swallowing the battery, cards or other small
parts.
Accidentally ring the ash into their own eyes or those of
another child.
Accidentally being injured by the moving parts of the
camera.
Do not look at the sun or strong lights with the camera.
Do not use or store the camera in dusty or humid places.
Do not cover the ash with a hand while ring.
Use SD/SDHC/SDXC memory cards only. Never use other
types of cards.
If you accidently insert another type of card into the camera,
contact an authorized distributor or service center. Do not try to
remove the card by force.
CAUTION
Stop using the camera immediately if you notice any
unusual odors, noise, or smoke around it.
Never remove the batteries with bare hands, which may
cause a re or burn your hands.
83 EN
Never hold or operate the camera with wet hands.
Do not leave the camera in places where it may be subject
to extremely high temperatures.
Doing so may cause parts to deteriorate and, in some
circumstances, cause the camera to catch re.
Do not use the USB-AC adapter if it is covered (such as a
blanket). This could cause overheating, resulting in re.
Handle the camera with care to avoid getting a low-
temperature burn.
When the camera contains metal parts, overheating can
result in a low-temperature burn. Pay attention to the
following:
When used for a long period, the camera will get hot. If you
hold on to the camera in this state, a low-temperature burn
may be caused.
In places subject to extremely cold temperatures, the
temperature of the cameras body may be lower than the
environmental temperature. If possible, wear gloves when
handling the camera in cold temperatures.
Be careful with the strap.
Be careful with the strap when you carry the camera. It could
easily catch on stray objects and cause serious damage.
Battery Handling Precautions
Follow these important guidelines to prevent batteries
from leaking, overheating, burning, exploding, or causing
electrical shocks or burns.
DANGER
The camera uses a lithium ion battery specied by Olympus.
Charge the battery with the specied USB-AC adapter. Do not
use any other USB-AC adapters.
Never heat or incinerate batteries.
Take precautions when carrying or storing batteries to prevent
them from coming into contact with any metal objects such as
jewelry, pins, fasteners, etc.
Never store batteries where they will be exposed to direct
sunlight, or subjected to high temperatures in a hot vehicle,
near a heat source, etc.
To prevent causing battery leaks or damaging their terminals,
carefully follow all instructions regarding the use of batteries.
Never attempt to disassemble a battery or modify it in any
way, solder, etc.
If battery uid gets into your eyes, ush your eyes immediately
with clear, cold running water and seek medical attention
immediately.
84 EN
Never drop the camera or subject it to severe shocks or
vibrations.
When mounted on a tripod, adjust the position of the camera
with the tripod head. Do not twist the camera.
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the sun. This may
cause lens or shutter curtain damage, color failure, ghosting on
the CCD, or may possibly cause res.
Do not push or pull severely on the lens.
Before storing the camera for a long period, remove the
batteries. Select a cool, dry location for storage to prevent
condensation or mold from forming inside the camera. After
storage, test the camera by turning it on and pressing the
shutter button to make sure that it is operating normally.
The camera may malfunction if it is used in a location where
it is subject to a magnetic/electromagnetic eld, radio waves,
or high voltage, such as near a TV set, microwave, video
game, loud speakers, large monitor unit, TV/radio tower, or
transmission towers. In such cases, turn the camera off and on
again before further operation.
Always observe the operating environment restrictions
described in the cameras manual.
Battery Handling Precautions
This camera uses a lithium ion battery specied by Olympus.
Do not use any other type of battery.
If the batterys terminals get wet or greasy, camera contact failure
may result. Wipe the battery well with a dry cloth before use.
Always charge a battery when using it for the rst time, or if it
has not been used for a long period.
When operating the camera with battery power at low
temperatures, try to keep the camera and spare battery
as warm as possible. A battery that has run down at low
temperatures may be restored after it is warmed at room
temperature.
The number of pictures you can take may vary depending on
the shooting conditions or battery.
Before going on a long trip, and especially before traveling
abroad, purchase extra batteries. A recommended battery may
be difcult to obtain while traveling.
Please recycle batteries to help save our planets resources.
When you throw away dead batteries, be sure to cover their
terminals and always observe local laws and regulations.
Monitor
Do not push the monitor forcibly; otherwise the image may
become vague, resulting in a playback mode failure or damage
to the monitor.
85 EN
Copyright Notice
All rights reserved. No part of these written materials or this
software may be reproduced or used in any form or by any
means, electronic or mechanical, including photocopying and
recording or the use of any type of information storage and
retrieval system, without the prior written permission of Olympus.
No liability is assumed with respect to the use of the information
contained in these written materials or software, or for damages
resulting from the use of the information contained therein.
Olympus reserves the right to alter the features and contents of
this publication or software without obligation or advance notice.
FCC Notice
Radio and Television Interference
Changes or modications not expressly approved by the
manufacturer may void the users authority to operate this
equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Adjust or relocate the receiving antenna.
Increase the distance between the camera and receiver.
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician
for help. Only the OLYMPUS-supplied USB cable should
be used to connect the camera to USB enabled personal
computers (PC).
Any unauthorized changes or modications to this equipment
would void the users authority to operate it.
90 EN
The software in this camera may include third party software.
Any third party software is subject to the terms and conditions,
imposed by the owners or licensors of that software, under
which such software is provided to you. Those terms and other
third party software notices, if any, may be found in the software
notice PDF le stored within the accompanying CD-ROM or at
http://www.olympus.co.jp/en/support/imsg/digicamera/download/
notice/notice.cfm
91 EN
SPECIFICATIONS
Camera
Product type : Digital camera (for shooting and displaying)
Recording system
Still pictures : Digital recording, JPEG (in accordance with Design rule for Camera File system
(DCF))
Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Sound with still pictures : Wave format
Movie : AVI Motion JPEG
Memory : Internal memory
SD/SDHC/SDXC memory cards
No. of effective pixels : 10,000,000 pixels
Image pickup device : 1/1.6 CCD (primary color lter)
Lens : Olympus lens 6 to 24 mm, f1.8 to 2.5
(equivalent to 28 to 112 mm on a 35 mm camera)
ND lter : 3 EV equivalent
Photometric system : Digital ESP, center-weighted, and spot metering using the camera image sensor
Shutter speed : 60 to 1/2000 sec., Bulb shooting
Shooting range :
0.6 m (2.0 ft.) to (W), 0.6 m (2.0 ft.) to (T) (normal)
0.1 m (0.3 ft.) to (W), 0.3 m (1.0 ft.) to (T) (macro mode)
0.01 m (0.03 ft.) to 0.6 m (2.0 ft.) (super macro mode)
Monitor : 3.0 organic EL display, 610,000 dots
Connector : USB/AV-out connector (multi-connector), HDMI micro connector (type D),
accessory port
Automatic calendar system : 2000 up to 2099
Operating environment
Temperature : 0 C to 40 C (32 F to 104 F) (operation)/
-20 C to 60 C (-4 F to 140 F) (storage)
Humidity : 30 % to 90 % (operation)/10 % to 90 % (storage)
Power supply : One Olympus lithium ion battery (LI-50B)
Dimensions : 110.6 mm (W) 64.8 mm (H) 42.3 mm (D)
(4.4 2.6 1.7 in.) (excluding protrusions)
Weight : 275 g (9.7 oz) (including battery, card, and cap)
92 EN
Lithium ion battery (LI-50B)
Product type : Lithium ion rechargeable battery
Standard voltage : DC 3.6 V
Standard capacity : 925 mAh
Battery life : Approx. 300 full charges (varies on usage)
Operating environment
Temperature : 0C to 40C (32F to 104F) (charging)/
-10C to 60C (14F to 140F) (operation)/
-20C to 35C (-4F to 95F) (storage)
USB-AC adapter (F-2AC)
Model No. : F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B/F-2AC-1C/F-2AC-3C/F-2AC-4C/
F-2AC-5C
Power requirements : AC 100 to 240 V (50/60 Hz)
Output : F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B: DC 5 V, 500 mA
F-2AC-1C/F-2AC-3C/F-2AC-4C/F-2AC-5C: DC 5 V, 550 mA
Operating environment
Temperature : 0 C to 40 C (32 F to 104 F) (operation)/
-20 C to 60 C (-4 F to 140 F) (storage)
Design and specications subject to change without notice.
HDMI, the HDMI Logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
VR352601