Number : 025/2006-76

Date : 12/12/2006
File in book :
Originated by : Pierre CREVAT
Authorised by :
Department : BSS Marketing

Product bulletin


New brine option for Aquasnap Puron 30RBs

Dear customers,
We are pleased to introduce the new brine option N 6 for 30RB 262 to 402 Aquasnap Puron
air cooled chillers. The new brine option is the answer to all applications with leaving water
temperature between +3 and 10C using either ethylene or propylene glycol fluids.
We draw your attention that brine option is not available for 30RB432 to 802 units

Typical applications
Ice storage (application with ethylene glycol)
Cold storage (application with ethylene or propylene glycol)
Industrial process (application with ethylene or propylene glycol)

Operating limits
Minimim leaving fluid temperature: -10C with ethylene or propylene glycol
Maximum outdoor temperature: The maximum air temperature depends on the leaving water
temperature, for example with 10C leaving water temperature the maximum outdoor air
temperature is 38C, see the selection software for detailed operating limits

Option description
The brine option consists of reinforced evaporator thermal insulation and the addition of
compressor suction line insulation.

Option compatibility
Brine option N6 is compatible with most factory installed option however the following
options are NOT SUITABLE with brine due to technical constraints:
Combination of options: super low noise level N 15LS and condenser with pre treated
aluminium fins N 3A
Combination of options: super low noise level N 15LS and condenser with anti corrosion
treatment N 2B
Heat recovery N 50
Free cooling N 118A

Performances and unit selection
Until end of January 2007 Contact Montluel factory export
From early Febuary 2007 New version PCB selection software

Pierre CREVAT