Professional Documents
Culture Documents
Parking Brake Adjustment
Parking Brake Adjustment
Because of the automatic adjustment function of the rear brakes, readjusting the parking brake is usually
not necessary. Readjust only if the parking brake cables, brake calipers, or brake pads and discs have
been replaced.
Zoom
Sized for Print
Remove hand grip and center console to allow access to adjusting nuts (arrows).
Release parking brake.
Zoom
Sized for Print
Tighten adjusting nut until lever (arrow) lift off of stop on caliper.
Gap (arrow) between lever and stop should be 1.0 - 3.0 mm (0.04 - 0.12 in) and the same on both sides.
A = Up to m.y. 1995 (S)
B = From m.y. 1996 (T)
1 = Feeler gauge
Pull up and then release parking brake three times.
Check that both wheels turn freely.