This document provides specifications for cast iron swing check valves with flanged ends per ASME B16.1 CL-125. It includes dimensional data for the main dimensions and flanges, standard material combinations for each part, and references relevant standards like BS5153. The manufacturer is Cedar Valves Ltd in Jalandhar, India.
This document provides specifications for cast iron swing check valves with flanged ends per ASME B16.1 CL-125. It includes dimensional data for the main dimensions and flanges, standard material combinations for each part, and references relevant standards like BS5153. The manufacturer is Cedar Valves Ltd in Jalandhar, India.
This document provides specifications for cast iron swing check valves with flanged ends per ASME B16.1 CL-125. It includes dimensional data for the main dimensions and flanges, standard material combinations for each part, and references relevant standards like BS5153. The manufacturer is Cedar Valves Ltd in Jalandhar, India.
This document provides specifications for cast iron swing check valves with flanged ends per ASME B16.1 CL-125. It includes dimensional data for the main dimensions and flanges, standard material combinations for each part, and references relevant standards like BS5153. The manufacturer is Cedar Valves Ltd in Jalandhar, India.
P.O. NO:- 2013-14/1071 DT. 02/12/13 M.O.NO. :- 2013/1680 DT. 04-12-13 0 u 0 = l '\" \) DIMENSIONAL DATA MAIN DIMENSIONS FLANGE DETAILS FLANGES BOLT HOLES WT.(KG.)I QTY DN/NPS L2 0C D B K n d 50mm 203 115 51 152 15.9 120.6 4 19 16.35 02 65mm 216 135 63.5 178 17.5 139.7 4 19 21.9 02 BO mm 241 135 76 191 19 152.4 4 19 24.4 02 STANDARD MATERIAL COMBINATION BS 2872 or BRASS/G.M. BS 2874 CZ114/ IS 21 0:93 Gr. 220 11.I WASHER BS 2872/ BS 2874 CZ114 10.I NUT H.T.BRASS 9. STUDS & NUTS !CARBON STEEL I BS 91 6 8. COVER 1 I C. I. llS 210:93 Gr. 220
..-.. .
,';t-
( 7. 6. GASKET C.N.A.F. HINGE PIN G.M. I BS EN 1982 CC491 K I l lS 210:93 Gr. 220/ C.I. C.C.S. ASTM A21 6:07 Gr. WCB of holes of holes 12 REVISION MADE REVISION NO.
DATE I ATHORISED !REMARKS SIGNATORY 0 C.I. llS 21 0 :93 Gr. 220 FACING RING G.M. I BS EN 1 982 CC491 K SEAT RING G.M. I BS EN 1982 CC491 K C.I. IS 210:93 Gr. 220 No.Off Material Specification/Standard CEADER VALVES LTD. All Dimensions in mm unless otherwise specified JALANDHAR-144004(1NDIA) CAST IRON SWING CHECK VALVES CL 125 DRN. G.S. 01. 12. 13 FLANGED ENDS AS PER ASME 816. 1 CL-125 FF CHKO H.KUMAR 08. 12. 13 FLANGES DRILLED AS PER ASME 816.5 CL-150 APPRD PRODUCT SPECIFICATION : BS 5153 SCALE N.T.S. Test Pressure:- BODY : 24.1 Kg/sq.cm (hyd) SEAT : 13.8 Kg/sq.cm {hyd) TESING STANDARD :- BSEN 12266 09.12.13 DRG.f\Jo. :- 322 FJL-13000/G/CM Issue Status 00 SHEET OF :r I I I 1 ii-----. .._,J -0 d/ MAIN DIMENSIONS VALVE SIZE L G H 25mm 108 89 454 40mm 121 101.5 524 50mm 140 121 580 FLANGE DETAILS ,,INLET FLING[ DIA 'D' a. llilCKNESS 'b' OUllT FlANCE DIA 'O' a. lHICKNESS 'b' JS PER BS: 10 TMI. 'F a. DRIWNC Mi PER Mi PER BS:10 TAB!. 'D' a. DRIUJNG Mi PER ASME 818.5 a.-150 MJME 816.!> CL-150 QTY. FLANGES BOLT HOLES Fl..ANGES BOLT HOLES Nos D b K n d D1 b1 K1 n1 dl 120.7 12.7 79.4 4 15.9 114.5 12.7 79.4 4 15.9 01 / 139.7 15.9 98.4 4 15.9 133.3 15.9 98.4 4 15.9 01 ./ 165 19.1 120.6 4 19 152.4 19. 1 120.6 4 19 01 / .1 fr !_JI STAN n---, DARD MATERIAL COMBINATION ----- -,-,, .,- _,_:..::_ 21 I SET SCREW ?n 1-1n1 ISING CAP 19 I CAP COTTER 1R l-IANDLE 17 STUDS & NUTS 1 BRASS ( 1 C.I. IBR-94 Clouse 86 To 93 Gr.A 1 BRONZE IBR-94 CLAUSE282{o){IV)Gr.B 1 C.I. IBR-94 Clouse 86 To 93 Gr.A To Suit CARBON STEEL BS 916:53 PART No. REVISION MADE REVISION I DATE !AUTHORISED I REMARKS No. SIGNATORY 16 COVER 1 C.I. 15 COVER BUSH 1 BRONZE SPRING ADJUSTING 14 SCREW 1 BRONZE 13 STEM 1 S.S. 12 SPRING CHAMBER 1 C.I. 11 SPRING (CADMIUM PLATED) 1 SPRING STEEL 10 SPRING DISC 1 C.I. 9 BOLTS & NUTS To Suit CARBON STEEL 8 GASKET 1 7 STEM BUSH 1 BRONZE 6 STEM LOCK NUT 1 BRONZE 5 REGULATING SCREW 1 H.T.BRASS 4 REGULATING RING 1 BRONZE 3 VAL\tE DISC 1 13% Cr. STEEL/ C.A.S. ./ 2 BODY SEAT RING 1 1 13% Cr. STEEY F.S.S. 1 I BODY I 1 I C.I. P.N.I NAME OF PART I No.Off I MATERIAL LEADER VALVES LTD. u JAL.AN TITLE IBR-94 Clause 86 To 93 Gr.A IBR-94 CLAUSE282{a)(IV)Gr.B IBR-94 CLAUSE282{a){IV)Gr.B ASTM A182 Gr. F6a IBR-94 Clause 86 To 93 Gr.A IBR-94 CLAUSE 307-314 IBR-94 Clause 86 To 93 Gr.A BS 916:53 C.N.A.F. IBR-94 CLAUSE282( o){IV)Gr.B IBR-94 CLAUSE282{a){IV)Gr.B IS 6912:85 Gr. FHTBl IBR-94 CLAUSE282{o){IV)Gr.B ASTM A276:98 TYPE 41 O+STELLITED/ ASTM A217 CA15+STELLITED ASTM A276:98 TYPE 410+STELLITED/ ASTM A 182 Gr. F6o+STELLITED IBR-94 Clouse 86 To 93 Gr.A SPECIFICATION All Dimensions in mm SCALE NTS C.I. SINGLE POST SAFETY VALVE RIGHT ANGLE PATIERN, FLANGED ENDS ORN. CHKD. AP PRO. TEST PRESSURE:- 612 FGJ-1300D/G/CM SHELL- 377 PSI g (26 Bar) Hyd. {$)-ft MAX. B.O.P . 188. 6 PSI g( 13 Bar) cit 428'F (220'C) Issue Status OD vr