The document provides vibration limits and classifications for electric motors based on ISO and NEMA standards. It includes tables with RMS velocity amplitudes and permissible displacement amplitudes for different motor grades, shaft heights, RPM ranges, and support classifications as either rigid or flexible. Motor vibration should be measured at no-load operation, rated voltage/frequency, nominal speed, and operational temperature.
The document provides vibration limits and classifications for electric motors based on ISO and NEMA standards. It includes tables with RMS velocity amplitudes and permissible displacement amplitudes for different motor grades, shaft heights, RPM ranges, and support classifications as either rigid or flexible. Motor vibration should be measured at no-load operation, rated voltage/frequency, nominal speed, and operational temperature.
The document provides vibration limits and classifications for electric motors based on ISO and NEMA standards. It includes tables with RMS velocity amplitudes and permissible displacement amplitudes for different motor grades, shaft heights, RPM ranges, and support classifications as either rigid or flexible. Motor vibration should be measured at no-load operation, rated voltage/frequency, nominal speed, and operational temperature.
The document provides vibration limits and classifications for electric motors based on ISO and NEMA standards. It includes tables with RMS velocity amplitudes and permissible displacement amplitudes for different motor grades, shaft heights, RPM ranges, and support classifications as either rigid or flexible. Motor vibration should be measured at no-load operation, rated voltage/frequency, nominal speed, and operational temperature.
Table 3-Recommended Vibration Limits for Electric Motors (Based on ISO IS 2373)
Motor Grade RPM RMS Velocity amplitude for the following shaft heights, in mm 80 < h < 132 132 < h < 225 225 < h < 400 mm/s in/s mm/s in/s mm/s in/s Normal 600 - 3600 1.80 0.071 2.8 0.110 4.5 0.177 Reduced 600 - 1800 0.71 0.028 1.12 0.044 1.8 0.071 1801 - 3600 1.12 0.044 1.80 0.071 2.8 0.110 Special 600 - 1800 0.45 0.018 0.71 0.028 1.12 0.044 1801 - 3600 0.71 0.028 1.12 0.044 1.8 0.071
Note: - RMS velocity amplitude is measured in the frequency range from 10 to 1000 Hz. - The shaft height is the vertical distance from the base of the motor to the centerline of the shaft
Table 4-Permissible Vibration for Large Induction Motors (Based on NEMA MG 1-20.52)
RPM Displacement amplitude (peak to peak), in inch 3000 - 4000 0.001 1500 - 2999 0.0015 1000 - 1499 0.002 999 and below 0.0025 Motor vibration measurements should be carried out in the condition of motor no-load operation, at rated voltage and nominal frequency (AC motor), nominal speed(s), and motor operational temperature.