This document is an inspection report for a post-weld heat treatment (PWHT) cycle. It lists 6 pieces of material with a thickness of 347 mm that were heated to 850°C at a rate of 155°C/hour and held for 25 minutes. The material then cooled at a rate of 152°C/hour. The report provides details of the heating treatment cycle, joint numbers and colors, and approval information.
This document is an inspection report for a post-weld heat treatment (PWHT) cycle. It lists 6 pieces of material with a thickness of 347 mm that were heated to 850°C at a rate of 155°C/hour and held for 25 minutes. The material then cooled at a rate of 152°C/hour. The report provides details of the heating treatment cycle, joint numbers and colors, and approval information.
This document is an inspection report for a post-weld heat treatment (PWHT) cycle. It lists 6 pieces of material with a thickness of 347 mm that were heated to 850°C at a rate of 155°C/hour and held for 25 minutes. The material then cooled at a rate of 152°C/hour. The report provides details of the heating treatment cycle, joint numbers and colors, and approval information.
This document is an inspection report for a post-weld heat treatment (PWHT) cycle. It lists 6 pieces of material with a thickness of 347 mm that were heated to 850°C at a rate of 155°C/hour and held for 25 minutes. The material then cooled at a rate of 152°C/hour. The report provides details of the heating treatment cycle, joint numbers and colors, and approval information.