This lab report summarizes modifications made to a LabVIEW VI template. Specifically:
1) A 60 Hz sine signal with 0.1 amplitude and added noise was generated.
2) Two signals - the 60 Hz sine signal and a second 60 Hz signal with noise - were added together using a Formula Express VI.
3) When run, the VI displayed a signal graph with the combined signal and noise output.
This lab report summarizes modifications made to a LabVIEW VI template. Specifically:
1) A 60 Hz sine signal with 0.1 amplitude and added noise was generated.
2) Two signals - the 60 Hz sine signal and a second 60 Hz signal with noise - were added together using a Formula Express VI.
3) When run, the VI displayed a signal graph with the combined signal and noise output.
This lab report summarizes modifications made to a LabVIEW VI template. Specifically:
1) A 60 Hz sine signal with 0.1 amplitude and added noise was generated.
2) Two signals - the 60 Hz sine signal and a second 60 Hz signal with noise - were added together using a Formula Express VI.
3) When run, the VI displayed a signal graph with the combined signal and noise output.
This lab report summarizes modifications made to a LabVIEW VI template. Specifically:
1) A 60 Hz sine signal with 0.1 amplitude and added noise was generated.
2) Two signals - the 60 Hz sine signal and a second 60 Hz signal with noise - were added together using a Formula Express VI.
3) When run, the VI displayed a signal graph with the combined signal and noise output.
This template VI simulates and analyzes it for its root mean square The Context Help window shows an information for the behavior of the Express VI. Once the VI is run,a signal will appeared.Later ,click the stop button to stop the VI.Automatically,the signal will not appeared.
To add a signal
A sine signal type were entered.60 Hz of frequency were entered and 0.1 of an amplitude were also entered. For this signal,Add noise were checkmark.As a result,a noise would appeared when it is run. A Run as fast as possible in Timing section were selected. When a Signal name were changed,automatically,the LabView will make a changes to a signal output on the block diagram.
To add two signals
A wire that connects the Sine output of the Simulate Signal Express VI to the Signals input of the Amplitude and Level Measurements Express VI and to the unfiltered signal indicator were removed. The sine output of the simulate Signal Express VI to the Sine input of the Formula Express VI were wired. A 60 Hz and noise output of the Simulate Signal Express VI to the Sine input of the Formula Express VI were also wired. The result output of the Formula Express VI to the Unfiltered Signal indicator and to the signals input of the amplitude and level measurements express VI were also wired. Once,the VI were ran,signal with added noise appeared on the graph.