Professional Documents
Culture Documents
Test Setup For Esdn: DIMA E-Solutions Pvt. Limited
Test Setup For Esdn: DIMA E-Solutions Pvt. Limited
Version: 1.0
Date: 26/11/2009
Document Revisions History
1.V-SAT -
This is required to Receive the High Definition(HD) feed which would be connected
through IDU to a switch to the STB over IP.
2.IDU-
This will receive the RF feed from the VSAT & give out the feed on IP.
3.Switch-
This is required to received the Feed from IDU. The several STB's which required the
feed can be directly connected to the Switch by Lan Cables.
4.Lan Cables-
This cables are required for connection of STB & IDU as communication is over IP.
The STB with proper Software Build is required to received the feed & process the same
to have a playback & other functionalities. The power adapter of I/p 100-240 V~1.2 A 50-
60 Hz, O/p 12V,3.33A would be required for STB.
The TV would be connected to the STB through HDMI O/P to view the High Quality
Content.
A external IR Cable would be connected to the STB to receive the key pressed from the
Remote of the STB to perform desired actions.
8.HDMI Cable-
The HDMI Cable would be used to connect the STB to TV.
Below is the Block diagram to explain the test Setup for ESDN.
2 Block Diagram
VSAT
IDU SWITCH
LAN
CABLE
TV STB