This polystyrene has been designed for injection molding appliance parts, toys, furniture parts, containers, and blow molded parts. It has a melt flow rate of 6.0-8.0 g/10 min, a density of 1020-1040 kg/m3, a tensile strength of 22 MPa, a tensile elongation of 50%, and an Izod impact of 100 J/m. Its vicat softening point is 95°C and heat deflection temperature is 93°C.
This polystyrene has been designed for injection molding appliance parts, toys, furniture parts, containers, and blow molded parts. It has a melt flow rate of 6.0-8.0 g/10 min, a density of 1020-1040 kg/m3, a tensile strength of 22 MPa, a tensile elongation of 50%, and an Izod impact of 100 J/m. Its vicat softening point is 95°C and heat deflection temperature is 93°C.
This polystyrene has been designed for injection molding appliance parts, toys, furniture parts, containers, and blow molded parts. It has a melt flow rate of 6.0-8.0 g/10 min, a density of 1020-1040 kg/m3, a tensile strength of 22 MPa, a tensile elongation of 50%, and an Izod impact of 100 J/m. Its vicat softening point is 95°C and heat deflection temperature is 93°C.