1

M.Tech. Electrical Engineering - Scheme and Syllabi

DEPARTMENT OF
ELECTRICAL ENGINEERING
RULES AND REGULATIONS
SCHEME OF INSTRUCTION AND SYLLABI
of
M.Tech. Programs
2
M.Tech. Electrical Engineering - Scheme and Syllabi
I Year II Semester
S. Course
Course Name L T P C
No. No.
1 EE5151 Advanced Electric Drives 4 0 0 4
2 EE5152 Advanced Power Electronics - II 4 0 0 4
3 EE5153 Digital Control Systems 4 0 0 4
4 EE5154 Drives Laboratory 0 0 3 2
5 EE5155 Power Electronic Simulation
Laboratory 0 0 3 2
6 Elective - IV 3 0 0 3
7 Elective - V 3 0 0 3
8 EE5191 Seminar - II 0 0 3 1

TOTAL
18 0 9 23
27
S. Course
Course Name L T P C
No. No.
1 EE5101 Electric Drives 4 0 0 4
2 EE5102 Advanced Power Electronics - I 4 0 0 4
3 EE5103 Electrical Machine Modeling
and Analysis 4 0 0 4
4 EE5104 Power Electronics Laboratory 0 0 3 2
5 EE5105 Digital Signal Processing
Laboratory 0 0 3 2
6 Elective - I 3 0 0 3
7 Elective - II 3 0 0 3
8 Elective - III 3 0 0 3
9 EE5141 Seminar - I 0 0 3 1

TOTAL
21 0 9 26
30
NATIONAL INSTITUTE OF TECHNOLOGY
WARANGAL 506 004
SCHEME OF INSTRUCTION AND EVALUATION
M.Tech. (Power Electronics and Drives)
I Year I Semester
3
M.Tech. Electrical Engineering - Scheme and Syllabi
II Year I Semester
S. Course
Course Name L T P C
No. No.
1 EE6142 Comprehensive Viva-voce 0 0 0 4
2 EE6149 Dissertation Part-A 0 0 0 8


TOTAL 0 0 0 12
II Year II Semester
S. Course
Course Name L T P C
No. No.
1 EE6199 Dissertation Part-B 0 0 0 18


TOTAL 0 0 0 18
Total Credits Offered - 26 + 23 + 12 + 18 = 79
LIST OF ELECTIVES
I Year I Semester
EE5111 Modern Control Theory
EE5112 Microprocessors and Microcontrollers
EE5113 Digital Signal Processors
EE5114 Electromagnetic Interference and Compatibility
EE5115 HVDC Systems and FACTS
EE5116 Applications of Power Converters
EE5117 Neural and Fuzzy Logic Control of Power Converters and Drives
EE5118 Design of Digital Systems
MA5013 Optimisation Techniques
I Year II Semester
EE5161 Electric Traction
EE5162 Modelling and Simulation of
Power Electronic Systems
EE5163 Digital Signal Processor Controlled Drives
EE5164 Electrical Machine Design
EE5165 Power Quality
EE5166 Alternate Sources of Electrical Energy
Category
I Year
I Sem
I Year
II Sem
II Year
I Sem
II Year
II Sem
Total
Program Core 16 16 0 0 32
Electives 9 6 0 0 15
Mandatory 1 1 4 0 6
Dissertation 0 0 8 18 26
Total 26 23 12 18 79
4
M.Tech. Electrical Engineering - Scheme and Syllabi
SYLLABUS
M.Tech. (Power Electronics and Drives)
EE5101 ELECTRIC DRIVES (4-0-0) 4
Introduction: Electrical drives, drive characteristics. D.C. motor drives: Rectifier fed drives, Chopper controlled
drives. Induction motor drives: Equivalent circuits, speed control, slip energy recovery. Synchronous motor
drives: Operation with fixed frequency and variable frequency source. Closed-loop control of drives: D.C.
motor drives - Armature Voltage control, Field weakening A.C. motors - motor drives with VSI, CSI and
Cycloconverter.
Reading:
1. G. K. Dubey : Fundamentals of Electrical Drives, 2nd Edition, Alpha Science International, 2001.
2. S.B. Dewan, Gordon R. Slemon and A. Straughen: Power Semiconductor Drives, John Wiley Pub.,
1996.
3. R. Krishnan: Electric Motor drives - Modelling, Analysis and Control, PHI India Ltd., 2002.
4. W. Shepherd, D. T. W. Liang and L.N. Hulley: Power Electronics and Motor Control, 2nd Edition, Cambridge
Univ. Press, 1995.
EE5102 ADVANCED POWER ELECTRONICS - I (4-0-0) 4
Overview of switching power devices: Characteristics of SCR, MOSFET, IGBT , design of snubber circuits.
Phase controlled rectifiers: Principle, power factor improvements, symmetrical angle control, PWM control,
SPWM control. DC-DC converters: Study of Class - A, B, C, and D choppers, non-isolated and isolated DC-
DC converters,. Inverters: Inverters, PWM techniques, selective harmonic elimination, space vector
modulation, multi-level inverters.
Reading:
1. M.H. Rashid: Power Electronics-circuits, Devices and Applications, 3rd Edition, PHI, 2005.
2. Ned Mohan, T.M. Undeland and William P. Robbins: Power Electronics: Converters, Applications,
3rd Edition, John Wiley & Sons, 2009.
EE5103 ELECTRICAL MACHINE MODELLING AND ANALYSIS (4-0-0) 4
Basic principles of electric machine analysis: Magnetically coupled circuits, Electro-magnetic(EM) energy
conversion, Reference frame theory: Equations of transformation, transformation between reference frames,
variables observed from various frames. Theory of symmetrical induction machines: Voltage and torque
expression, state-space model of IM in'd-q-0' variables. Theory of synchronous machines: Voltage and
torque equations, equations in arbitrary reference frame.
Reading:
1. P. C. Krause, O. Wasynczuk and S.D. Sudhoff: Analysis of Electric Machinery and Drive Systems,
2nd Edition, IEEE Press, 2002.
2. C.V. Jones: Unified Theory of Electrical Machines, Butterworths, 1967.
3. J. Meisel: Principles of Electromechanical Energy Conversion, R.E. Krieger, 1984.
EE5104 POWER ELECTRONICS LABORATORY (0-0-3) 2
Study of characteristics of Power Semiconductor devices (SCR, Triac etc.) - Study of sequence control of
thyristor Converter - Study of PWM Converter-DC-to-DC Switched Mode Converter-Study of Three-phase
Full and Half controlled Converter with R-L and R-L-E loads - Study of Class - C and Class - D Commutation
schemes - Study of Single phase Full and Half controlled Converter with R-L and R-L-E loads - Study of
Single phase AC voltage controller feeding R and R-L loads - Study of 1- inverter with square wave, quasi-
square wave and SPWM Control - Study of 1-

Cycloconverter.
5
M.Tech. Electrical Engineering - Scheme and Syllabi
EE5105 DSP LABORATORY (0-0-3) 2
General programming examples - Study of aliasing phenomenon. - Study of the On-Chip Analog to digital
conversion of TMS320LF2407 processor. - Study of the GPIO registers - Producing a saw tooth wave from
the DAC - PWM signal generation using event manager - Space Vector Modulation of a 3- VSI -
Implementation of the difference equation - Study of the interrupts of TMS320LF2407 processor - Dead-
time generation to avoid shoot-through fault.
EE5111 MODERN CONTROL THEORY (3-0-0) 3
System representation: State and state variable, system representation in state variable form, Transformations,
Lagrange linearization. Time response: State transition matrix, Time response of linear systems, State
diagrams. Controllability and observability: Definition and concepts, Criteria, Luenberger observer design.
Stability: Definitions, Lyapunov stability. Optimal control: Formulation of the optimal control problem, Method
of calculus of variations, Use of Hamiltonian method, minimum principle, Jacobi approach.
Reading:
1. Katsuhiko Ogata: Modern Control Engineering, 5th Edition, Prentice-Hall, 2010.
2. M. Gopal: Modern Control Systems Theory, Revised 2nd Edition, New Age Int. Pub, 2005.
EE5112 MICROPROCESSORS AND MICRO CONTROLLERS (3-0-0) 3
8086 ARCHITECTURE: Architecture, internal operation, addressing modes. Assembly language: Branch
and Loop instructions, macros, procedures. Input/output programming: Interrupt I/O, interrupts structure.
Operating systems and system interrupt services: Structure of computer system, BIOS and DOS. System
bus structure: Standards and types, Bus timing. Interfacing the 8086: Memory interfacing, Serial and parallel
communication, interfacing to the 8085/8086 system. Introduction to 16-bit micro-controllers: 8097 Micro
controller architecture and its applications. Applications of microprocessors in electrical systems.
Reading:
1. Yu Cheng Liu and Glenn A.Gibson : Microcomputer Systems : The 8086 / 8088 family - Architecture,
Programming and Design, 2nd Edition, PHI, 2009.
2. Douglas V. Hall: Microprocessors and Interfacing - Programming and Hardware, Revised 2nd Edition,
TMH, 2008.
3. Kenneth J. Ayala : The Intel Microprocessor - Programming and Interfacing the PC, 1st Edition, Delmar
Cengage Learning Publishers, 2007.
4. Barry B.Brey : The Intel Microprocessors - 8086 to Pentium Pro Processor - Architecture, Programming
and Interfacing, 8th Edition, Pearson Publishers, 2010.
EE5113 DIGITAL SIGNAL PROCESSORS (3-0-0) 3
Introduction to the TMSLF2407 DSP controller: Peripherals, physical memory types, software tools. C2XX
DSP CPU and instruction set : C2xx DSP Core and code generation, mapping external devices, assembly
programming. GPIO functionality: Pin multiplexing (MUX) and GPIO Overview and its control registers.
Interrupts on the TMS320LF2407: Introduction, Interrupt Hierarchy and its Control Registers. ADC: Overview,
Operation and programming modes. Event managers: Overview, Interrupts, Timers, Compare Units, PWM
Signal Generation with Event Managers.
Reading:
1. Hamid A. Toliyat: DSP Based Electromechanical Motion Control, CRC Press, 2004.
2. Sen M Kuo and Woon-Seng S.Gan, Digital Signal Processors: Architectures, Implementation and
Applications, 1st Edition, Pearson, 2003.
3. Texas Instruments Inc, TMS320LF / L1240XA DSP Controller reference guide - System and Perphiral,
www.ti.com, Texas Instruments Literature SPRU 357A.
EE5114 ELECTRO MAGNETIC INTERFERENCE AND COMPATIBILITY (3-0-0) 3
Introduction: EMC standardization and description, measuring instruments, conducted EMI references, EMI
in power electronic equipment: EMI from power semiconductors circuits. Noise suppression in relay systems:
6
M.Tech. Electrical Engineering - Scheme and Syllabi
A.C. switching relays, shielded transformers, capacitor filters, EMI generation and reduction at source,
influence of layout and control of parasites. EMI filter elements: Capacitors, choke coils, resistors, EMI filter
circuits. EMI filter design for insertion loss: Worst case insertion loss, design method for mismatched
impedance condition and EMI filters with common mode choke-coils.
Reading:
1. Laszlo Tihanyi: Electromagnetic Compatibility in Power Electronics, IEEE Press, 1995.
2. R. F. Ficchi: Practical Design for Electromagnetic Compatibility, Hayden Book Co., 1971.
EE5115 HVDC SYSTEMS AND FACTS (3-0-0) 3
HVDC transmission - introduction - analysis of HVDC converters - pulse number-converter bridge
characteristics- converter and HVDC system control- principles of dc link control- power control- harmonics
and filters - general modeling of dc links - flexible ac transmission systems(FACTS)-flow of power in an ac
system-basic types of FACTS controllers- objectives, basic operating principle and control approaches.
Reading:
1. K.R. Padiyar: HVDC Power Transmission System, 2nd Edition, New Age Intl. Pvt. Ltd., 2012.
2. N.G. Hingorani and L.Gyugyi: Understanding FACTS: Concepts and Technology of Flexible AC
Transmission Systems, Wiley India Pvt. Ltd., 2011.
EE5116 APPLICATIONS OF POWER CONVERTERS (3-0-0) 3
Power converter topologies for Induction heating-welding-lighting, HV power supplies: X-ray-radar-space,
Low voltage high current power supplies- UPS-Active Filters-Electric Vehicle-Automotive Electronics.
Reading:
1. Ali Emadi, A. Nasiri, and S. B. Bekiarov: Uninterruptible Power Supplies and Active Filters, CRC Press,
2005.
2. M. Ehsani, Y. Gao, E. G. Sebastien and A. Emadi: Modern Electric, Hybrid Electric and Fuel Cell Vehicles,
1st Edition,CRC Press, 2004.
3. William Ribbens: Understanding Automotive Electronics, Newnes, 2003.
4. Research Publications in the relevant areas.
EE5117 NEURAL AND FUZZY LOGIC CONTROL OF POWER CONVERTERS AND DRIVES (3-0-0) 3
Elements of neural control: ANN architectures- training algorithms- neural network implementation,Fuzzy
Logic Fundamentals: Fuzzy sets-membership functions-linguistic variables- Fuzzy logic operators-Fuzzy
control systems-Fuzzy logic in power and control applications.
Reading:
1. M.N. Cirstea, A. Dinu, J.G. Khor and M. McCormick: Neural and Fuzzy Logic Control of Drives and
Power System, Newnes, 2002.
2. P. Vas: Artificial-Intelligence-Based Electrical Machines and Drives: Application of Fuzzy, Neural, Fuzzy-
Neural, and Genetic-Algorithm-Based Techniques, Oxford University Press, 1999.
3. T. J. Ross: Fuzzy Logic with Engineering Application, 3rd Edition, John Wiley and Sons, 2010.
EE5118 DESIGN OF DIGITAL SYSTEMS (3-0-0) 3
Principles of Sequential logic design: Concept of FSM - Metastability, State machine structures: Moore
machine - Mealy machine, Analysis of state machine with D and J-K Flip-flops, Clocked synchronous state
machine design, Designing state machine using state diagrams, State machine synthesis using transition
list, Clock skew, Overview of PLDs, CPLDs and FPGAs, RT level combinational circuit, Regular sequential
circuit, Design examples with VHDL.
Reading:
1. J. F. Wakerly: Digital Design-Principles and Practices, 4th Edition, Pearson, 2008.
2. Pong P. Chu: FPGA Prototyping by VHDL Examples: Xilinx Spartan-3 Version, 1st Edition, Wiley-
Interscience, 2008.
7
M.Tech. Electrical Engineering - Scheme and Syllabi
MA5013 OPTIMIZATION TECHNIQUES (3-0-0) 3
Linear programming: Introduction and formulation of models, Convexity, simplex method, Big-M method,
two-phase method, Nonlinear programming: Classical optimization methods, Lagrange multipliers and Kuhn-
Tucker conditions. Search methods: One dimensional optimization, sequential search, Fibonacci search,
multidimensional search methods. Dynamic programming: Principle of optimality, recursive relations, solution
of LPP, Integer Linear Programming: Gomory's cutting plane method, Branch and bound algorithm.
Reading:
1. S.S. Rao: Engineering Optimization: Theory and Practice, 4th Edition, John-Wiley and Sons, 2009.
2. J.C. Pant: Introduction to Optimization, Jain Brothers, 2004.
EE5151 ADVANCED ELECTRIC DRIVES (4-0-0) 4
Control of separately excited dc motor drives: Inner current loop and speed control design. Vector control of
induction motor drives: V/f control, dq0 model and State space model of 3-Ph IM, Vector control of IM. Direct
torque control of induction motor drives: Principle of Direct Torque Control, Comparison of DTC and Vector
control. Vector control of PMSM drive. Brushless DC motor drives.
Reading:
1. B.K. Bose: Modern Power Electronics and AC Drives, 1st Edition, Pearson, 2002.
2. Bin-Wu: High-power Converters and AC Drives, IEEE Press, John Wiley & Sons, 2006.
EE5152 ADVANCED POWER ELECTRONICS - II (4-0-0) 4
Modeling of dc-dc converters: AC modeling, state space averaging, transfer functions. Resonant converters:
Resonant circuit concepts and its classification. Current mode control: Types, slope compensation. Controller
design: Loop stabilization, conditional stability. Design of switching power converters: Design for magnetic
components filter capacitors. Power quality issues: compensators, PFC.
Reading:
1. M.H. Rashid : Power Electronics-circuits, Devices and Applications, 3rd Edition, PHI, 2005.
2. Ned Mohan, T.M. Undeland and William P.Robbins: Power Electronics: Converters, Applications, 3rd
Edition, John Wiley & Sons, 2009.
EE5153 DIGITAL CONTROL SYSTEMS (4-0-0) 4
Introduction: Quantizing, Data acquisition. Z-Transform: Properties and theorems, Inverse z-transform. Z-
plane analysis of discrete-time control systems: Realization, Mapping, Stability analysis, State space analysis:
Representation and its solution, Lyapunov stability. Pole placement and observer design: Controllability,
Observability, pole placement. Quadratic optimal control systems: Theory and its application to servo system.
Reading:
1. K. Ogata: Discrete Time Control Systems, 2nd Edition, Pearson Education, 2006.
2. M. Gopal: Digital Control Engineering, New Age Int. Ltd., India, 2003.
EE5154 DRIVES LABORATORY (0-0-3) 2
Torque-speed c/s of a separately excited DC motor drive fed by a two-pulse centre-tapped thyristor rectifier
and 6-pulse fully controlled rectifier - Study of a four-quadrant separately excited DC motor drive-
Implementation of centre spaced space vector modulation with DSP - TMS320LF2407 for V/Hz control of
induction motor drives - Implementation of discontinuous space vector modulation with DSP - TMS320LF2407
for V/Hz control of induction motor drives.
EE5155 POWER ELECTRONICS SIMULATION LABORATORY (0-0-3) 2
Study on the 'D-Q-0' transformation in various frames of reference- Dynamic performance of an induction
motor during a 3-phase fault at the machine terminals - Dynamic performance of a synchronous machine
using 'D-Q-0' model, during a sudden change in input torque - Study on Sine-triangle PWM scheme for a 3-
phase VSI - Study on SVM scheme for a 3-phase VSI - Study on Selective Harmonic elimination scheme for
a 3-phase VSI.
8
M.Tech. Electrical Engineering - Scheme and Syllabi
EE5161 ELECTRIC TRACTION (3-0-0) 3
Traction systems: Electrification, 1- system and its problems. Traction mechanics: Speed-time curve.
Traction motors: Characteristics, series motor, Traction motor control: Series-parallel control. Braking: Types,
Regenerative braking. Power supply arrangements: Equipment at sub-station. Rectification equipment and
semiconductor devices: Choppers. Train lighting: Requirements. Radio interference: Principle, design.
Reading:
1. H. Partab: Modern Electric Traction, Dhanpat Rai & Sons, 2003.
2. S. Rao: EHV AC and HVDC Transmission Engineering and Practice, 3rd Edition, Khanna Pub, 1997.
EE5162 MODELLING AND SIMULATION OF POWER ELECTRONIC SYSTEMS (3-0-0) 3
Introduction: Computer simulation, its process and mechanics. Simulation of power electronic converters:
State-space representation, Trapezoidal integration, M and N method. Simulation of electric drives: Modeling
with transportation delay, Modeling and simulation of Vector controlled 3-Ph IM. Modeling, simulation of
switching converters with state space averaging: State Space Averaging Technique and its application in
simulation and design of power converters.
Reading:
1. M. B. Patil, V. Ramnarayanan and V. T. Ranganathan: Simulation of Power Electronic Converters,
1st Edition, Narosa Publishers, 2010.
2. Ned Mohan, T.M. Undeland and William P.Robbins: Power Electronics: Converters, Applications,
3rd Edition, John Wiley & Sons, 2009.
EE5163 DSP CONTROLLED DRIVES (3-0-0) 3
Overview of TMSLF2407 DSP controller: Instruction Set, Interrupts. Clarke's and park's transformations:
Implementation of Clarke's and Park's transformation, SV PWM, BLDC Motor Control System, permanent
magnet synchronous machines control system, vector control of IM, field oriented control, Induction Motor
Speed Control using LF2407 DSP.
Reading:
1. Hamid A. Toliyat: DSP Based Electromechanical Motion Control, 1st Edition, CRC Press, 2004.
2. Ned Mohan, T.M. Undeland and William P.Robbins: Power Electronics: Converters, Applications,
3rd Edition, John Wiley & Sons, 2009.
EE5164 ELECTRICAL MACHINE DESIGN (3-0-0) 3
Thermal circuit: Enclosures-types, ventilation and cooling methods in electrical machines and transformers,
Magnetic circuit: Basic principles, flux density calculations. Electric circuit: Types AC windings, fractional
Pitch. DC machines: Output equation and coefficient, design of pole. Transformer: Output coefficient and
equation, window dimensions. Induction motor: Output equation, main dimensions calculation. Alternators:
Output coefficient and calculation of main dimensions, short circuit ratio.
Reading:
1. A.K. Sawhney: A Course in Electrical Machine Design, New Age International Co., 1990.
2. R.K. Agarwal: Principles of Electrical Machine Design, 4th Edition, S.K. Kataria & Sons, 2002.
EE5165 POWER QUALITY (3-0-0) 3
Introduction: Definition and requirement, Terms and definitions: Classes, problems, Voltage sags and
interruptions: Sources of sag and its interruptions. Transient over voltages: Sources, over-voltage protection
principle. Fundamentals of harmonics: Harmonic distortion, voltage versus current distortion, Long-duration
voltage variations: principle and devices for voltage regulating, Power quality monitoring: Monitoring
considerations, measuring instruments, monitoring standards.
Reading:
1. Dugan Roger C, Santoso Surya and Mark F Mc Granaghan: Electrical Power Systems Quality, TMH,
2008.
2. C. Sankaran: Power Quality, CRC Press, 2002.
9
M.Tech. Electrical Engineering - Scheme and Syllabi
EE5166 ALTERNATE SOURCES OF ELECTRIC ENERGY (3-0-0) 3
Introduction: Renewable sources of energy, distributed Generation, renewable energy economics. PhotoVoltaic
power plants: Solar energy, generation of electricity PV cell characteristic. Fuel cells: Fuel cells, commercial
and manufacturing issues, equivalent circuit. Induction generators: Operating principle, self-excited induction
generator, Speed and Voltage Control. Storage systems: Parameters, lead-acid batteries, ultra-capacitors,
flywheels, superconducting magnetic storage system, pumped hydroelectric energy storage, compressed
air energy storage.
Reading:
1. Felix A. Farret and M. Godoy Simes: Integration of Alternative Sources of Energy, John Wiley & Sons,
2006.
2. R. Teodorescu, M. Liserre and Pedro Rodrguez: Grid Converters for Photovoltaic and Wind Power
Systems, John Wiley & Sons, 2011.
10
M.Tech. Electrical Engineering - Scheme and Syllabi
I Year II Semester
M.Tech. (Power Systems Engineering)
I Year I Semester
S. Course
Course Name L T P C
No. No.
1 EE5251 Advanced Power Systems Protection 4 0 0 4
2 EE5252 State Estimation and
Security Analysis 4 0 0 4
3 EE5253 Power System Stability and Control 4 0 0 4
4 EE 5254 AI Laboratory 0 0 3 2
5 EE 5255 Power Systems Simulation
Laboratory 0 0 3 2
6 Elective - IV 3 0 0 3
7 Elective - V 3 0 0 3
8 EE5291 Seminar - II 0 0 3 1

TOTAL
18 0 9 23
27
S. Course
Course Name L T P C
No. No.
1 EE5202 Advance Computer Methods in
Power Systems 4 0 0 4
2 EE5203 HVDC and FACTS 4 0 0 4
3 EE5204 AI Techniques in Power Systems 4 0 0 4
4 EE 5204 Power Systems Laboratory 0 0 3 2
5 EE 5205 Power Systems Computation
Laboratory 0 0 3 2
6 Elective - I 3 0 0 3
7 Elective - II 3 0 3 3
8 Elective - III 3 0 0 3
9 EE 5241 Seminar - I 0 0 3 1

TOTAL
18 0 12 26
30
11
M.Tech. Electrical Engineering - Scheme and Syllabi
II Year I - Semester
S. Course
Course Name L T P C
No. No.
1 EE6242 Comprehensive Viva-voce 0 0 0 4
2 EE6249 Dissertation Part-A 0 0 0 8


TOTAL 0 0 0 12
II Year II Semester
S. Course
Course Name L T P C
No. No.
1 EE6299 Dissertation Part-B 0 0 0 18


TOTAL 0 0 0 18
Total Credits Offered - 26 + 23 + 12 + 18 = 79
Category
I Year
I Sem
I Year
II Sem
II Year
I Sem
II Year
II Sem
Total
Program Core 16 16 0 0 32
Electives 9 6 0 0 15
Mandatory 1 1 4 0 6
Dissertation 0 0 8 18 26
Total 26 23 12 18 79
LIST OF ELECTIVES
I Year I Semester
EE 5111 Modern Control Theory
EE 5112 Microprocessor and Microcontroller Systems
EE 5113 Digital Signal Processors
EE 5211 Design and Testing of H.V. Apparatus
EE 5212 Advanced Topics in Power Systems
EE 5213 Distribution System Planning and Automation
EE 5214 Economic Operation of Power Systems
EE 5215 Power System Reliability and Planning
MA 5013 Optimization Techniques
I Year II Semester
EE 5165 Power Quality
EE 5166 Alternative Sources of Electrical Energy
EE 5261 Power System Deregulation
EE 5262 EHV AC Transmission
EE 5263 Power System Transients
EE 5264 Smart Electric Grid
12
M.Tech. Electrical Engineering - Scheme and Syllabi
M.Tech. (Power Systems Engineering)
EE5201 ADVANCED COMPUTER METHODS IN POWER SYSTEMS (4-0-0) 4
Incidence and network matrices - introduction, graphs, incidence matrices formation - y
bus
by singular
transformation- introduction to load flow analysis- gauss-seidel, newton-raphson and fast-decoupled method-
algorithms for formation of z
bus
matrix- short-circuit (sc) studies- introduction, sc calculations using z
bus
, z
fabc
,
y
fabc
, z
f012
, y
f012
matrices for various faults, example of sc calculations using z
bus
for l-l-l and l-g faults- Power
Flow (PF)solutions- sparsity technique - comparison of gs, nr, fdc methods- review of ac/dc load flow solutions,
nr-load flow study with facts devices - PF analysis using MATLAB.
Reading:
1. Stagg G.Ward and El-Abiad: Computer Methods in Power System Analysis, McGraw Hill ISE, 1986.
2. Hadi Saadat : Power System Analysis, 3rd Edition, PSA Publishers, 2010.
3. J. Arrilaga and C.P. Arnold: Computer Modeling of Electric Power Systems, 1st Edition, John Wiley &
Sons, N.Y., 2001.
EE5202 HVDC AND FACTS (4-0-0) 4
HVDC transmission- introduction- analysis of HVDC converters - pulse number-converter bridge
characteristics- converter and HVDC system control- principles of dc link control- power control- harmonics
& filters - introduction- generation of harmonics- types of ac filters- power flow analysis in ac/dc systems -
general modeling of dc links - flexible ac transmission systems(FACTS)-flow of power in an ac system-basic
types of FACTS controllers- objectives, basic operating principle and control approaches.
Reading:
1. K.R. Padiyar: HVDC Power Transmission System, 2nd Edition, New Age Intl. Pvt. Ltd., 2012.
2. N.G. Hingorani and L.Gyugyi: Understanding FACTS: Concepts and Technology of Flexible AC
Transmission Systems, Wiley India Pvt. Ltd., 2011.
EE5203 AI TECHNIQUES IN POWER SYSTEMS (4-0-0) 4
Artificial neural networks- introduction- neural network models- architectures - knowledge representation-
learning process-back propagation, rbf algorithms- hopfield network-fuzzy logic- introduction- fuzzy sets -
membership function - fuzzy logic - fuzzy inference-defuzzification methods - genetic algorithms- introduction-
encoding -fitness function-genetic operators- applications of ai techniques- load forecasting - load flow
studies - economic load dispatch - load frequency control - reactive power control - speed control of dc and
ac motors.
Reading:
1. S.Rajasekaran and G.A.V.Pai: Neural Networks, Fuzzy Logic and Genetic Algorithms, 1st Edition, PHI,
2009.
2. Rober J. Schalkoff, Artificial Neural Networks, 1st Edition, Tata McGraw Hill Education Pvt. Ltd., 2011.
3. G.J.Klir and T.A.Folger; Fuzzy Sets,Uncertainty and Information, 1st Edition, PHI Pvt. Ltd., 2009.
4. Bart Kosko; Neural Network and Fuzzy System, 1st Edition, Dorling Kindersley (India) Pvt. Ltd., 2007.
EE5204 POWER SYSTEMS LABORATORY (0-0-3) 2
P-Q Control of Synchronous machine, Simulation of faults for multi machine system on DC network analyzer,
Reactive power control of artificial transmission line, Sequence reactances and fault studies on synchronous
machine, Reactive control by tap changing transformers, Testing of Static relays, 3 - zone distance Protection
scheme, Digital Mapping of distribution Networks, Measurement of High AC voltages using sphere gap,
Determination of breakdown strength of oil, Generation of different impulse waveforms.
13
M.Tech. Electrical Engineering - Scheme and Syllabi
EE5205 POWER SYSTEM COMPUTATION LABORATORY (0-0-3) 2
Solution of simultaneous Algebraic equations by Gauss-Elimination, Crout's method and Cholesky method-
Solution of Simultaneous differential equations by RK-4 and Modified Euler's method- Formation of Ybus
using two dimensional arrays by inspection method - Formation of Ybus using Sparsity Technique- Load
flow by Gauss Seidel, Newton Raphson and Fast Decoupled methods using two-dimensional arrays, sparsity
techniques and MATLAB- AC/DC load flow study- NR-load flow study with FACTS.
EE5111 MODERN CONTROL THEORY (3-0-0) 3
System representation-introduction to state and state variable- transformations- state transition matrix-
properties and methods of valuation - time response of linear systems - state diagrams - resolvent matrix-
controllability and observability-state variable feedback - pole placement-stability-stability in the sense of
liapunov, stability of linear systems and non linear systems-optimal control-formulation of the optimal control
problem - use of hamiltonian method - continuous time linear state regulator matrix riccati equation-state
variable feedback design.
Reading:
1. Katsuhiko Ogata : Modern Control Engineering, 5th Edition, Prentice-Hall of India, 2010.
2. M. Gopal : Modern Control Systems Theory, 2nd Edition, New Age Intl. Pvt. Ltd., 1993.
EE5112 MICROPROCESSORS AND MICRO CONTROLLERS (3-0-0) 3
8086 ARCHITECTURE: Architecture, internal operation, addressing modes. Assembly language: Branch
and Loop instructions, macros, procedures. Input/output programming: Interrupt I/O, interrupts structure .
Operating systems and system interrupt services: Structure of computer system, BIOS and DOS. System
bus structure: Standards and types, Bus timing. Interfacing the 8086: Memory interfacing, Serial and parallel
communication, interfacing to the 8085/8086 system. Introduction to 16-bit micro-controllers: 8097 Micro
controller architecture and its applications. Applications of microprocessors in electrical systems.
Reading:
1. Yu Cheng Liu and Glenn A.Gibson : Microcomputer Systems : The 8086 / 8088 Family - Architecture,
Programming and Design, 2nd Edition, PHI-2009.
2. Douglas V. Hall: Microprocessors and Interfacing - Programming and Hardware, Revised 2nd Edition,
TMH - 2008.
3. Kenneth J. Ayala : The Intel Microprocessor - Programming and Interfacing the PC, Delmar Cengage
Learning Publishers, 1st edition, 2007.
4. Barry B.Brey : The Intel Microprocessors - 8086 to Pentium Pro Processor - Architecture, Programming
and Interfacing, 8th Edition, Pearson Publishers, 2010.
EE5113 DIGITAL SIGNAL PROCESSORS (3-0-0) 3
Introduction to the TMSLF2407 DSP controller- Types of Physical Memory-C2XX DSP CPU and Instruction
set- Introduction-Generation - Mapping External Devices to the C2xx Core and the Peripheral Interface-
Assembly Programming-Multiplexing and General Purpose I/O Control Registers-Interrupts on the
TMS320LF2407-Introduction and Interrupt Hierarchy-The Analog-to-Digital converter (ADC)-Overview and
Operation of the ADC and programming modes-The Event managers (EVA, EVB)- PWM Signal Generation
with Event Managers.
Reading:
1. Hamid A. Tolyat : DSP Based Electromechanical Motion Control, CRC Press, 2004.
2. Sen M Kuo and Woon-Seng S.Gan, Digital Signal Processors: Architectures, Implementation and
Applications, 1st Edition, Pearson, 2003.
3. Texas Instruments Inc, TMS320LF / L1240XA DSP Controller reference guide - System and Perphiral,
www.ti.com, Texas Instruments Literature SPRU 357A.
EE5211 DESIGN AND TESTING OF HIGH VOLTAGE APPARATUS (3-0-0) 3
Introduction - High Voltage Overhead Lines - High Voltage Cables - High Voltage Bushings - High Voltage
Power Transformers - Generation of High Voltages and Testing Techniques - High Voltage Measuring
Techniques.
14
M.Tech. Electrical Engineering - Scheme and Syllabi
Reading:
1. H.M. Ryan: High Voltage Engineering and Testing, IET Press, 2nd Revised Edition 2001.
2. Ravindra Arora and Wolfgang Mosch: High Voltage and Electrical Insulation Engineering, IEEE Press,
2011.
3. E. Kuffel, W.S. Zaengl and J. Kuffel, High Voltage Engineering Fundamentals, Newnes Publishers,
2nd Edition 2011.
EE5212 ADVANCED TOPICS IN POWER SYSTEMS (3-0-0) 3
Introduction to voltage stability- deregulation of the electricity supply industry - power system operation in
competitive environment-transmission open access and pricing issues - ancillary services management -
reliability and deregulation- power quality issues- application of power system stabilizers (pss) - multi-phase
(six-phase) system - demand side management and energy auditing.
Reading:
1. Kankar Bhattacharya, Math H.J. Bollen, Jaap E. Daalder: Operation of Restructured Power Systems,
Springer Publishers, 2001.
2. K.R. Padiyar: Power System Dynamics Stability and Control, 2nd Edition, BS Publications, 2002.
3. Loi Lei Lai: Power System Restructuring and Deregulation: Trading, Performance and Information
Technology, John Wiley & Sons, Pvt. Ltd., 2001.
EE5213 DISTRIBUTION SYSTEMS PLANNING AND AUTOMATION (3-0-0) 3
Distribution system planning - planning and forecasting techniques, load characteristics - definitions - load
forecasting - load management - tariffs-distribution transformers- types - three phase and single phase
transformers - connections, dry type and self protected type transformers - regulation and efficiency-sub
transmission lines and distribution sub-stations- distribution substations - bus schemes - substation location
and rating - primary systems - voltage drop and power loss calculations - capacitors in distribution systems-
distribution system protection - distribution system automation- grounding.
Reading:
1. Turan Gonen : Electric Power Distribution System Engineering, 2nd Edition, BS Publications, 2007
2. Pabla A.S.: Electric Power Distribution Systems, 4th Edition, TMH, 2006.
EE5214 ECONOMIC OPERATION OF POWER SYSTEMS (3-0-0) 3
Economic dispatch problem and methods of solutions - economic importance-generator unit characteristics
- economic dispatch problem considering and neglecting transmission losses - iterative and non-iterative
methods of solutions- economic dispatch using dynamic programming, economic dispatch versus unit
commitment- unit commitment- constraints in thermal and hydro-units - unit commitment solution methods-
hydro thermal coordination - long range and short-range hydro-scheduling - dynamic programming solution
to hydro-thermal scheduling - control of generation- models of power system elements - single area and
multi area block diagrams - generation control with pid controllers, implementation of automatic generation
control (agc) - agc features- economic dispatch by ann and ga approaches.
Reading:
1. Allen J. Wood and B.F. Woolenberg: Power Generation, Operation and Control, 2nd Edition, Wiley India
Pvt. Ltd., 2006.
2. John J. Grainger and William D Stevenson: Power System Analysis, 1st Edition, McGraw Hill ISE, 2003.
3. PSR Murthy : Operation and Control in Power System, 2nd Edition, BS Publications, 2009.
EE5215 POWER SYSTEM RELIABILITY AND PLANNING (3-0-0) 3
Basic reliability concepts- reliability function- markov process- reliability models-generating capacity - basic
probability methods - the generation system model, loss of load and loss of energy indices- transmission
systems reliability evaluation- radial configuration - conditional probability approach, network configurations
15
M.Tech. Electrical Engineering - Scheme and Syllabi
- state selection- generation planning- comparative economic assessment of individual generation projects-
investigation and simulation models - probabilistic generator and load models - transmission planning-
deterministic contingency analysis - probabilistic transmission system - reliability analysis - distribution
planning- network configuration design-consisting of schemes - security criteria configuration synthesis.
Reading:
1. Roy Billinton and Ronald Allan Pitam: Reliability Evaluation of Power Systems, 2nd Edition,
BS Publications, 2008.
2. R.L. Sullivan: Power System Planning, 1st Edition, McGraw Hill International Book Co., 1977.
MA5013 OPTIMIZATION TECHNIQUES (3-0-0) 3
Linear Programming-Introduction and formulation of models, Convexity, simplex method, transportation and
assignment problems, traveling salesman problem-Nonlinear Programming-Classical optimization methods,
equality and inequality constraints, Lagrange multipliers and Kuhn-Tucker conditions, quadratic programming
problem and Wolfe's method-Search Methods-sequential search, Fibonacci search, Fletcher-Reeves method-
Dynamic Programming-Principle of optimality, recursive relations.
Reading:
1. S.S. Rao : Optimization Theory and Applications, 2nd Edition, John Wiley & Sons (Asia) Pvt. Ltd.,
1984.
2. J.C. Pant : Introduction to Optimization, 1st Edition, Jain Brothers Publishers, 2004.
EE5251 ADVANCED POWER SYSTEM PROTECTION (4-0-0) 4
Static Relays- Block diagram - types of static relays- over current, differential and distance relays - Digital
Protection - Modelling of digital relays- Protection of power system and apparatus using digital protection
schemes - New developments in relaying principles.
Reading:
1. T.S.Madhava Rao: Power System Protection - Static Relays, 2nd Edition, TMH Publications, 2004.
2. Arun G.Phadke and James S. Thorp: Computer Relaying for Power Systems, 2nd Edition, John Wiley
and Sons Inc., 2009.
EE5252 STATE ESTIMATION AND SECURITY ANALYSIS (4-0-0) 4
Introduction to State Estimation in Power Systems - State Estimation of Ac Networks - Types of State
Estimation - An Introduction to Advanced Topics in State Estimation - Power System Security Analysis-
Computer Control of Power Systems.
Reading:
1. Allen J. Wood and B.F. Woolenberg: Power Generation, Operation and Control, 2nd Edition, Wiley India
Pvt. Ltd., 2006.
2. John J. Grainger and William D Stevenson: Power System Analysis, 1st Edition, McGraw Hill ISE, 2003.
3. Special Issue on Computer Control of Power Systems, IEEE Proc. July 1974.
EE5253 POWER SYSTEM STABILITY AND CONTROL (4-0-0) 4
Synchronous machine modelling - parks transformation- dq0 equivalent circuits- machine impedances -
time constants - phasor diagrams - basic models for power system studies - action of proportional and
forced action avr-dynamic stability of smib system and mmp systems-transient stability studies - stability
analysis of multi machine systems, effect of exciter and governor models, computer solution and flow charts
- methods to improve stability - methods to improve steady state, dynamic, transient and voltage stability.
Reading:
1. P.M. Anderson and A.A. Fouad: Power System Control and Stability, 2nd Edition, IEEE Computer Society
Press, 2002.
2. Prabha Kundur: Power System Stability and Control, 1st Edition, TMH Publishers, 2006.
3. V.A. Venikov; Transient Process in Electrical Power Systems, 1st Edition, MIR Publications, 1977.
16
M.Tech. Electrical Engineering - Scheme and Syllabi
EE5254 ARTIFICIAL INTELLIGENCE LABORATORY (0-0-3) 2
Load Flow analysis using Neural Network, State Estimations using Neural Network, Contingency Analysis
using Neural Network, Power system Security using Neural Network, Fuzzy Logic based AGC, Single area
system, Two area system, Fuzzy Logic based small signal stability analysis, Simulation and verification of
fuzzy Logic experiments using fuzzy logic trainer.
EE5255 POWER SYSTEM SIMULATION LABORATORY (0-0-3) 2
Simulation of Single Area and Two Area Systems using Matlab Package. Study of load frequency control
problem of (i) uncontrolled and (ii) controlled cases- Economic Dispatch of (i) Thermal Units and (ii) Thermal
Plants using Conventional and ANN and GA algorithms - MVAR Compensation studies on normal and
heavily loaded power systems using Mi-power package - Contingency evaluation and analysis of power
system-Development of single line diagram of power system components-State estimation of power systems.
EE5165 POWER QUALITY (3-0-0) 3
Introduction-power and voltage quality-terms and definitions, transients, long and short-duration voltage
variations-Voltage sags and interruptions sources - Transient over voltages - capacitor - switching transients
-switching transient problems with - Fundamentals of -harmonic distortion evaluations and harmonic filter
design - Power quality monitoring-power quality measurement equipment - assessment of power quality
measurement data - application of intelligent systems - power quality monitoring standards.
Reading:
1. Dugan Roger C, Surya Mc Granaghan, Marks F. Beaty and H. Wayre, Electrical Power Systems Quality,
3rd Edition, TMH Publishers, 2012.
2. J.Arillaga, N.R.Watson and S.Chen, Power Systems Quality Assessment, 1st Edition, John Wiley &
Sons, 2000.
3. C.Sankaran, Power Quality, CRC Press, 2001.
EE5166 ALTERNATE SOURCES OF ELECTRICAL ENERGY (3-0-0) 3
Introduction-Renewable Sources of Energy - Grid-Supplied Electricity - Distributed Generation-Renewable
Energy Economics - Modern Electronic Controls of Power Systems-Wind power plants-Appropriate Location
- General Classification of Wind Turbines-Photovoltaic power plants-Solar Energy-Fuel Cells-The Fuel Cell-
Fuel Cell Equivalent Circuit-Aspects of Hydrogen as Fuel-Induction Generators-Storage systems-
Ultracapacitors -Flywheels -Superconducting Magnetic Storage System.
Reading:
1. Felix A. Farret, M. Godoy Simoes: Integration of Alternative Sources of Energy, John Wiley & Sons,
2006.
2. Remus Teodorescu, Marco Liserre and Pedro Rodrguez: Grid Converters for Photovoltaic and Wind
Power Systems, John Wiley & Sons, 2011.
3. Gilbert M. Masters: Renewable and Efficient Electric Power Systems, John Wiley & Sons, 2004.
EE5261 POWER SYSTEM DEREGULATION (3-0-0) 3
Overview of key issues in electric utilities- introduction - management of inter zonal/intra zonal congestion-
oasis-open access same-definitions transfer capability issues - atc - ttc - trm - cbm calculations - electricity
pricing- introduction - electricity price volatility-pricing - short-time price forecasting- power system operation
in competitive environment- introduction-ancillary services management- introduction - reactive power as
an ancillary service - a synchronous generators as ancillary service providers.
Reading:
1. Kankar Bhattacharya, Math H.J. Bollen and Jaap E. Daalder: Operation of Restructured Power Systems,
Springer Publishers, 2001.
2. Mohammad Shahidehpour and Muwaffaq alomoush - Restructured Electrical Power Systems,
1st Edition, Marcel Dekker, Inc, 2001.
17
M.Tech. Electrical Engineering - Scheme and Syllabi
EE5262 EHV AC TRANSMISSION (3-0-0) 3
Introduction to EHV AC Transmission - Properties of bundled conductors- equivalent circuit of line model -
Corona - Over Voltage in EHV Systems- Switching surges-insulation coordination design - Theory of reactive
power control - fundamental transmission line equation - Passive shunt compensation - Power System
Grounding - grounding system safety assessment, Basic design of grounding, Mitigation of touch and step
voltages, Design example of a substation grounding.
Reading:
1. Rakesh Das Begamudre : Extra High Voltage AC Transmission Engineering, 4th Edition, New Age
International Publishers, 2011.
2. Timothy.J.E. Miller: Reactive Power Control in Electric Systems, Wiley India Pvt. Ltd., 2010.
3. Turan Gonen: Electric Power Transmission System Engineering Analysis and Design, 2nd Edition, BS
Publications, 2009.
EE5263 POWER SYSTEM TRANSIENTS (3-0-0) 3
Introduction to Power System Transients- abnormal switching transients- Electromagnetic Phenomena Under
Transient Conditions- Travelling Waves on Transmission Lines- Modelling of Power Apparatus Under Transient
Conditions- Protection of System Against Transients.
Reading:
1. Allen Greenwood: Electrical Transient in Power Systems, 2nd Edition, Wiley India Pvt. Ltd., 2010.
2. Harold A Peterson: Transient in Power Systems, 1st Edition, John Wiley & Sons, 1951.
3. E. Kuffel, W.S. Zaengl and J. Kuffel, High Voltage Engineering Fundamentals, 2nd Edition, Newnes
Publishers, 2011.
EE5264 SMART ELECTRIC GRID (3-0-0) 3
Introduction to Smart Grid-Smart Grid Functions - Advantages - Indian Smart Grid - Key Challenges for
Smart Grid-Smart Grid Architecture -Components and Architecture of Smart Grid Design - Transmission
and Distribution Automation - Computational Intelligence Techniques - Distribution Generation Technologies-
Introduction to Renewable Energy Technologies - Micro grids - Storage Technologies - Electric Vehicles and
plug - in hybrids - Environmental - Synchro Phasor Measurement Units (PMUs) - Wide Area Measurement
Systems (WAMS) - Control of Smart Power Grid System.
Reading:
1. Gil Masters, Renewable and Efficient Electric Power System, Wiley-IEEE Press, 2004.
2. A.G. Phadke and J.S. Thorp, Synchronized Phasor Measurements and their Applications, Springer,
2008.
3. T. Ackermann, Wind Power in Power Systems, 2nd Edition, John Wiley & Sons, 2012.