Professional Documents
Culture Documents
Router IOS Recovery
Router IOS Recovery
You need to set up a router with a cross-over cable direct to the PC and a console cable, then
configure the PC with the following IP address on it NIC.
Ip address: 10.1.1.1
Router>en
Router#conf t
Router(config)#int fa0/0
Router(config-if)#no shut
Router(config-if)#^Z
Router#
Router#dir flash:
Directory of flash:/
.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!
Router#
On the faulty router, same cabling, (commands are case sensitive, have to be upper case):
IP_ADDRESS: 10.1.1.2
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 10.1.1.1
TFTP_SERVER: 10.1.1.1
TFTP_FILE: c2600-ik2s-mz.121-27b.bin