This document summarizes the design of a wood beam, including:
- The beam is made of Douglas Fir-Larch wood and is a 4x10 size.
- Under the applied service loads, the maximum bending stress ratio is 0.347 and the maximum shear stress ratio is 0.224, both below allowable limits.
- The maximum downward deflection is 0.161 inches under total loads, meeting deflection criteria.
This document summarizes the design of a wood beam, including:
- The beam is made of Douglas Fir-Larch wood and is a 4x10 size.
- Under the applied service loads, the maximum bending stress ratio is 0.347 and the maximum shear stress ratio is 0.224, both below allowable limits.
- The maximum downward deflection is 0.161 inches under total loads, meeting deflection criteria.
This document summarizes the design of a wood beam, including:
- The beam is made of Douglas Fir-Larch wood and is a 4x10 size.
- Under the applied service loads, the maximum bending stress ratio is 0.347 and the maximum shear stress ratio is 0.224, both below allowable limits.
- The maximum downward deflection is 0.161 inches under total loads, meeting deflection criteria.
ENERCALC, INC. 1983-2011, Build:6.11.6.23, Ver:6.11.6.23
Licensee : Lic. # : File: \\Server\csds 2012\DHLA\7) Boccella Residence\Calculations\Enercalc\ROOF BEAMS.ec6 Description : RB38 Material Properties Beam Bracing : Calculations per NDS 2005, IBC 2009, CBC 2010, ASCE 7-05 Completely Unbraced Allowable Stress Design Douglas Fir - Larch No.1 1,350.0 1,350.0 925.0 625.0 1,600.0 580.0 170.0 675.0 32.210 Analysis Method : Eminbend - xx ksi Wood Species : Wood Grade : Fb - Tension psi psi Fv psi Fb - Compr Ft psi Fc - Prll psi psi Fc - Perp E : Modulus of Elasticity Ebend- xx ksi Density pcf Load Combination :2009 IBC & ASCE 7-05 4x10 Span =11.0 ft 4x10 Span =0.750 ft D(0.13) Lr(0.17) D(0.09) Lr(0.1) D(0.028) Lr(0.04) D(0.056) Lr(0.08) D(0.077) Lr(0.11) . Applied Loads Service loads entered. Load Factors will be applied for calculations. Beam self weight calculated and added to loads Load for Span Number 1 Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 0.0 -->> 2.50 ft, Tributary Width = 2.0->0.0 ft, (ROOF) Point Load : D = 0.130, Lr = 0.170 k @2.50 ft, (FR RB34-R) Uniform Load : D = 0.0140, Lr = 0.020 ksf, Extent = 2.50 -->> 11.0 ft, Tributary Width = 4.0->0.0 ft, (ROOF) Point Load : D = 0.090, Lr = 0.10 k @2.50 ft, (FR RB35-L) Load for Span Number 2 Uniform Load : D = 0.0140, Lr = 0.020 ksf, Tributary Width = 5.50->0.0 ft, (ROOF) . DESIGN SUMMARY Design OK Maximum Bending Stress Ratio 0.347: 1 Load Combination +D+0.750Lr+0.750L+H Span # where maximum occurs Span # 1 Location of maximum on span 4.823ft 38.08psi = = FB : Allowable 1,596.57psi Fv : Allowable 4x10 Section used for this span Span # where maximum occurs Location of maximum on span Span # 1 = Load Combination +D+0.750Lr+0.750L+H = = = 170.00psi = = Section used for this span 4x10 fb : Actual Maximum Shear Stress Ratio 0.224 : 1 0.000ft = = 554.56psi fv : Actual Maximum Deflection 972 819 Ratio = 540 Max Downward L+Lr+S Deflection 0.089 in 1475 Ratio = Max Upward L+Lr+S Deflection -0.018 in Ratio = Max Downward Total Deflection 0.161 in Ratio = Max Upward Total Deflection -0.033 in . Location in Span Load Combination Max. "-" Defl Location in Span Load Combination Span Max. "+" Defl Overall Maximum Deflections - Unfactored Loads D+Lr 1 0.1611 5.415 0.0000 0.000 D+Lr 2 0.0000 5.415 -0.0333 0.750 . Load Combination Support 1 Support 2 Support 3 Vertical Reactions - Unfactored Support notation : Far left is #1 Values in KIPS Overall MAXimum 1.011 1.031 D Only 0.454 0.455 Lr Only 0.557 0.575 D+Lr 1.011 1.031