Professional Documents
Culture Documents
Putting Water Where It Counts!: Features
Putting Water Where It Counts!: Features
Putting Water Where It Counts!: Features
Drill Bits
A N T E L C O P T Y L T D
T e l + 6 1 8 8 4 1 6 9 0 0 0
F a x + 6 1 8 8 4 1 6 9 0 9 9
E m a i l a d e l a i d e @ a n t e l c o . c o m . a u
Putting Water Where It Counts!
S c a n t h e b a r c o d e w i t h y o u r s m a r t
p h o n e o r t a b l e t t o c h e c k o u t o r
w e b s i t e !
www.antelco.com
Xpando Drill Bit
STEP 1 STEP 2 STEP 3
Drill hole using recommended Xpando
Drill Bit. Use low speed drill. Remove burrs
and swarth from pipe prior to installing
Capo grommet and Xpando fitting.
Place appropriate Capo grommet firmly in
hole with flange facing out.
Push Xpando Take-Off Adaptor into
grommet until flange and grommet are
flush. Flush sub mains and lateral lines
after installation.
XPANDO
HOLE SIZE
SIZE (min. ID) THICKNESS THICKNESS GROMMET GROMMET
Installation Instructions
XPANDO 10 mm x 14 mm take-off 25 mm 1.5 mm 3.6 mm 10 mm 14 mm
XPANDO 10 mm x 15 mm take-off (curved)
XPANDO 13 mm x 13 mm take-off
XPANDO 13 mm x 14 mm take-off 40 mm 1.5 mm 2.3 mm 13 mm 16 mm
XPANDO 13 mm x 15 mm take-off
XPANDO 16 mm x 16 mm take-off 50 mm 1.5 mm 3.6 mm 16 mm 19 mm
XPANDO 16 mm x 18 mm take-off
XPANDO 19 mm x 19 mm take-off
XPANDO 19 mm x 21 mm take-off 50 mm 1.5 mm 6.0 mm 19 mm 22 mm
XPANDO 19 mm x 25 mm take-off
N
E
W
N
E
W