The document provides instructions for upgrading the firmware of MID7020/8020 devices. It involves:
1. Installing drivers on a PC.
2. Opening a firmware application and selecting the firmware update files to add.
3. Saving the firmware data files to a specific save path.
4. Clicking start to begin the firmware burn and update process, which will show a progress bar.
5. Upon completion, removing the USB cable, power cycling the device, and pressing the reset button to complete the upgrade.
Original Description:
Original Title
Upgrade Firmware Introduction for MID7020&8020
The document provides instructions for upgrading the firmware of MID7020/8020 devices. It involves:
1. Installing drivers on a PC.
2. Opening a firmware application and selecting the firmware update files to add.
3. Saving the firmware data files to a specific save path.
4. Clicking start to begin the firmware burn and update process, which will show a progress bar.
5. Upon completion, removing the USB cable, power cycling the device, and pressing the reset button to complete the upgrade.
The document provides instructions for upgrading the firmware of MID7020/8020 devices. It involves:
1. Installing drivers on a PC.
2. Opening a firmware application and selecting the firmware update files to add.
3. Saving the firmware data files to a specific save path.
4. Clicking start to begin the firmware burn and update process, which will show a progress bar.
5. Upon completion, removing the USB cable, power cycling the device, and pressing the reset button to complete the upgrade.
2. Open firmware application [FWDN-V7v2.1.!"!#$ %. after startFWDN&V7&v2.1't(e PC displa) will appear *elow s(ow +. please clic,-.add file')o/ need c(oose [l,.rom#. [tcc01&mtd.im2# filesplease t(e *elow s(ow pict/re Please Power t/rn off't(en press t(e devices [(ome# ,e) . power t/rn on't(e devices will 2o to /p2rade firmware mode.' Connected a USB cable,Please see t(e *elow pict/re 3. Clic,N4ND Datadispla) area t(e windows will pop top for )o/ c(oose-')o/ need c(oose saveN4ND Data faipat(t(en save as small windiwsto [save#'please see t(e *elow pict/re 5. Click window lower right6tart Button appears below the interface, that burn in progress 0. t(e window lower interface will s(ow progress complete information, then you need take out USB cable , power turn on the devices will update new firmware. 1. Upgrade is complete, please press the reset button
Windows Operating System: Windows Operating System (OS) Installation, Basic Windows OS Operations, Disk Defragment, Disk Partitioning, Windows OS Upgrade, System Restore, and Disk Formatting