This document summarizes the technical specifications of a multi-functional photovoltaic module that can be integrated into insulating glass systems. The module allows over 50% light and visual transparency while providing 70% silicon conservation and over 80% sun use. It can generate 68 Wp/m2 of power without sun tracking mechanics and works optimally at sun altitudes up to 20 degrees. The weight is only 2 kg/m2 more than standard insulating glass and it has no limitations on pane size.
This document summarizes the technical specifications of a multi-functional photovoltaic module that can be integrated into insulating glass systems. The module allows over 50% light and visual transparency while providing 70% silicon conservation and over 80% sun use. It can generate 68 Wp/m2 of power without sun tracking mechanics and works optimally at sun altitudes up to 20 degrees. The weight is only 2 kg/m2 more than standard insulating glass and it has no limitations on pane size.
This document summarizes the technical specifications of a multi-functional photovoltaic module that can be integrated into insulating glass systems. The module allows over 50% light and visual transparency while providing 70% silicon conservation and over 80% sun use. It can generate 68 Wp/m2 of power without sun tracking mechanics and works optimally at sun altitudes up to 20 degrees. The weight is only 2 kg/m2 more than standard insulating glass and it has no limitations on pane size.
Type of construction: Multi-functional photovoltaics modules integration of an innovative concentrator
system into the gas space of insulating glass systems
Degree of transparency: dependent on latitude, 50 % light and visual transparency with comparable performance in relation to fully coated glass Silicon conservation: 70 % Degree of shadowing: up to 100 % against direct sun rays and thus additional reduction of heat loads Tolerance altitude of the sun: 20 no sun altitude tracking necessary complex and expensive mechanics and sensors are thus not required Degree of sun use: > 80 % Power output: 68 Wp/m Weight: 2 kg/m in addition to the statically dimensioned insulating glass Fit-to-construction: no limitation of the pane sizes Since geographical location and alignment with the sun impact on the alignment of the concentrators, the optimal congu- ration of the ONLYGLASS POWERFACADE powered by KaustikSolar is always dependent on the project. ONLYGLASS.DE ONLYGLASS GMBH | Siemensstrae 1517 | 27283 Verden/Germany T +49 (0)4231 904967-0 | F +49 (0)4231 904967-10 | info@onlyglass.de | www.onlyglass.de TECHNICAL DATA 1 0 / 2 0 1 3