Professional Documents
Culture Documents
Enerpac ATM Series Catalog
Enerpac ATM Series Catalog
Adjustable Reach-on
ATM-3
The highly adjustable reach
of the wing, the reversible lift
hook and manual
torque wrench TW-22 (3/8" drive)
allow precise alignment.
• Rectifies twist and rotational misalignment without additional
stress in pipe lines ATM-5 Including
• For most commonly used ANSI, API, BS and DIN flanges Hydraulics
• No slings, hooks, or lifting gear. Extremely safe, high precision Including 10,000 psi
hydraulics: RC-53 single-
• ATM-1 supplied with three bushings for different bolt hole acting cylinder, P-142 two-
sizes. Can be used in reversed position. speed hand pump and 6 ft. long safety
• ATM-3 fits when flange joint is: hose (HC-7206C).
– between 1.18 - 5.23 inches apart and
– bolt hole size 0.95 inches or greater All dimensions shown in inches.
18.72
• ATM-5 fits when flange joint is: ATM-1
ø 1.07
3.16
ø.663
– bolt hole size 1.25 inches or greater
• Can be installed and used in any position and any location 1.77 ø .83 ø .95
4.13
• Stays stable in position under full load
3.94
ATM-3 ATM-5
The Enerpac ATM-3 used to align a large 25.98
18.72
ANSI flange. 14.50
20.71
TW-22
14.82
Ø.86
.
12.09
.
10.63
.
8.97
.
2.99
13.26
4.02
5.12
.
12.20
1.26
. .
1.17
1.76
5.66
4.17
5.85
9.45