This document contains instructions for a transportation engineering exam with multiple choice questions. It asks the test taker to answer 3 of 6 questions. The questions cover topics like defining runway configurations, components of an airplane, costs of bridge structures, scour depth calculations, wind rose diagrams, bridge components, site selection, stream discharge, afflux determination, and bridge bearings. Diagrams are required where necessary. The questions range from 4-8 marks each and cover a variety of transportation engineering topics for bridges and airports.
This document contains instructions for a transportation engineering exam with multiple choice questions. It asks the test taker to answer 3 of 6 questions. The questions cover topics like defining runway configurations, components of an airplane, costs of bridge structures, scour depth calculations, wind rose diagrams, bridge components, site selection, stream discharge, afflux determination, and bridge bearings. Diagrams are required where necessary. The questions range from 4-8 marks each and cover a variety of transportation engineering topics for bridges and airports.
This document contains instructions for a transportation engineering exam with multiple choice questions. It asks the test taker to answer 3 of 6 questions. The questions cover topics like defining runway configurations, components of an airplane, costs of bridge structures, scour depth calculations, wind rose diagrams, bridge components, site selection, stream discharge, afflux determination, and bridge bearings. Diagrams are required where necessary. The questions range from 4-8 marks each and cover a variety of transportation engineering topics for bridges and airports.
Que- 1 A Define Runway. State various basic patterns of configurations of the runway with neat sketches. 8 B State the advantages and Limitations of air transportation 6 Que-2 A Draw a neat labeled sketch of an aeroplane to show various component parts. 6 B Define the following terms: 8 1) Cross wind component 2) Calm period 3) Ground speed 4) Air speed Que-3 A The following are the costs of one pier and one superstructure of a multiple span bridge for various span lengths. The cost of superstructure span excludes the cast of railing and flooring system. Calculate the economic 8 span: Span (m) 04 08 12 15 Cost of superstructure in (Rs) 1700 7000 16000 24000 Cost of one pier (Rs) 22200 23200 23000 23600 B A bridge is proposed to be constructed across an alluvial stream carrying a discharge of 300 m3/sec Assuming the value of silt factor =1.1, determine the maximum scour depth when the bridge consists of 8 1) Two spans of 35 m each 2) Three spans of 30 m each Que-4 A Define and Explain Wind Rose Diagram.. 6 B Define Bridge and explain its Component.? 6 c Explain Site Selection for Bridge . 4 Que-5 A Explain Determination of Design Discharge of Stream.. 6 B Explain Determination of Afflux. 4 C Determination of Economical Span of Bridge.. 6 Que-6 A A Bridge has a linear waterway of 200 m. constructed across a stream whose natural waterway is 300 m. If avg. design discharge is 1500 m3/s & Avg. Flood depth 4m. Calculate Afflux under bridge? 8 B Explain the Bridge Bearings. 4 C Type of Temporary Bridge ? Explain any one of them..? 4 Navsahyadri Education Society's Faculty of Engineering B.E. Civil (Semester II) Unit Test-II Transportation Engg.-II Time :- 2 Hours Max. Marks:- 50