The document describes the VL-440 fluorescent lighting fixture model. It can be mounted individually or in continuous runs, and comes with moulded or enamel side panels. Fixtures include sockets, starters, and ballasts, and can be wired for different voltages. Ceiling tracks, hangers, and connecting bands are included for mounting. Dimensions and packaging details are provided. Additional spotlight models LS-70 and LS-71 are described that can attach to the VL-440 units.
The document describes the VL-440 fluorescent lighting fixture model. It can be mounted individually or in continuous runs, and comes with moulded or enamel side panels. Fixtures include sockets, starters, and ballasts, and can be wired for different voltages. Ceiling tracks, hangers, and connecting bands are included for mounting. Dimensions and packaging details are provided. Additional spotlight models LS-70 and LS-71 are described that can attach to the VL-440 units.
The document describes the VL-440 fluorescent lighting fixture model. It can be mounted individually or in continuous runs, and comes with moulded or enamel side panels. Fixtures include sockets, starters, and ballasts, and can be wired for different voltages. Ceiling tracks, hangers, and connecting bands are included for mounting. Dimensions and packaging details are provided. Additional spotlight models LS-70 and LS-71 are described that can attach to the VL-440 units.
West Coast Factory: 2040 Livingston Street, Oakland 6, California. VL440 Cut 45 Model VL-440 is arranged for use with four 40-watt, 48 inch, T-12 fluorescent lamps. It can be mounted singly or in continuous runs, suspended at any convenient height, or attached direct in the ceiling surface. Moulded translucent side panels or high gloss white enamel steel panels; specify on order. Available in 45 and 31 louvers. Fixtures in continuous rows can be serviced from the inside without removing a complete unit. Wired units include sockets, type FS replaceable starters and two U.L. and E.T.L. approved high p.f. 2-lamp ballasts. Conventional 110-125 volts, 60 cy., ac. Other voltages and frequencies on request. Also available for instant start operation. Ceiling tracks supplied for ceiling mounting. Hangers, stems, ceiling strap and canopy furnished for pendant mounting. Connecting bands furnished for continuous run installations at no extra charge. Dimensions: Individual UnitLength 49^", Width 16^" Height 5&". Continuous rowsLength 49^", Width 16^" Height 5A". Packed in individual cartons. Shipping weight 50 lbs. Stems and canopy. Ship- ping weight 5 lbs. Candlepower Distribution Curves Commonwealth Edison LaboratoryLongitudinal and Transverse cut-off. 45 CUT-OFF 31 CUT-OFF DIRECLITE LS-70 Available for 4 light fixtures. Mount the Leader Adjustable Spotlight over display merchandise and you get an inconspicuous yet effective lighting source. Easily installed to any "Officer" unit whether at the end of a single unit or between units in a continuous run. VL-440 Installations Cat. No. LS-70 takes P.A.R. 38 Bulb. Both ends open for VL-440 continuous run. Cat. No. LS-71 takes P.A.R. 38 Bulb. Open one end for VL-440 single unit. Dimensions: Length 10|" (side) Width 16^ (end) Height 5". Packed in individual cartons. Shipping weight 10 lbs, M-90