The Constellation series 110 lighting fixture by Lighting Products, Inc. is designed to meet the standards of the Utilities Research Commission. It is a complete unit that includes a top housing, reflector, shielding assembly, louvers or glass panels, ballast equipment, and lampholders. All fixtures are pre-wired and include starters, lamp holders, and ballasts for 110 volt AC operation. The die-formed steel reflector provides 85% reflection and attaches to the top housing with cap nuts. Side panels are ribbed glass with 30% or less transmission. Louvers, when included, are of an egg-crate design finished in white and meet light cut-off specifications.
The Constellation series 110 lighting fixture by Lighting Products, Inc. is designed to meet the standards of the Utilities Research Commission. It is a complete unit that includes a top housing, reflector, shielding assembly, louvers or glass panels, ballast equipment, and lampholders. All fixtures are pre-wired and include starters, lamp holders, and ballasts for 110 volt AC operation. The die-formed steel reflector provides 85% reflection and attaches to the top housing with cap nuts. Side panels are ribbed glass with 30% or less transmission. Louvers, when included, are of an egg-crate design finished in white and meet light cut-off specifications.
The Constellation series 110 lighting fixture by Lighting Products, Inc. is designed to meet the standards of the Utilities Research Commission. It is a complete unit that includes a top housing, reflector, shielding assembly, louvers or glass panels, ballast equipment, and lampholders. All fixtures are pre-wired and include starters, lamp holders, and ballasts for 110 volt AC operation. The die-formed steel reflector provides 85% reflection and attaches to the top housing with cap nuts. Side panels are ribbed glass with 30% or less transmission. Louvers, when included, are of an egg-crate design finished in white and meet light cut-off specifications.
Distributed nationally through leading electrical wholesalers. The LPI Constellation The Constellation series 110 is designed to conform to the standards of the Util ities Research Commission. The fixture is a complete unit including top housing, reflector shielding assembly, louvers or glass panels, ballast equipment and lamp- holders. All fixtures are wired completely and include starters (removable without dis- turbing lamps), butt-on lamp holders, and HPF ballasts for 110 volt, 60 cycle, A. C. operation. Ballasts and wireway are completely enclosed in the top housing. A die-formed reflector is made of 20 gauge steel and is attached to the top housing by two cap nuts. Reflector is easily removable for maintenance and inspection. The reflector is finished with high temperature baked white enamel and provides a reflec- tion factor of 85%. Side panels are ceramic ribbed glass with a transmission factor not exceeding 30%. Bottom glass assembly consists of two pieces of bent, clear, ribbed glass with brightness and transmission factors as specified by the Utilities Research Com- mission. On louvered units, the louvers are of egg-crate design finished in "Klasium White." Louvers are hinged at the ends of the unit and meet at the center where they are held by a spring clamp. The light cut-off of these louvers meets the specifications of the Utilities Research Commission. Patents pending on all features and designs, M-98