This document provides specifications for the Modern-Lite industrial fluorescent lighting unit. It describes the unit's design for general or localized illumination over work areas. The steel reflector meets Underwriters' specifications and is finished in gray outside and white inside. Models come with renewable starters and approved ballasts. Specifications are provided for three models (B-248, B-348, B-448) listing the number and size of lamps, fixture dimensions, shipping weight, voltage, and ballast factor. Models can be used with 220-250 volt current. A catalog is available upon request.
This document provides specifications for the Modern-Lite industrial fluorescent lighting unit. It describes the unit's design for general or localized illumination over work areas. The steel reflector meets Underwriters' specifications and is finished in gray outside and white inside. Models come with renewable starters and approved ballasts. Specifications are provided for three models (B-248, B-348, B-448) listing the number and size of lamps, fixture dimensions, shipping weight, voltage, and ballast factor. Models can be used with 220-250 volt current. A catalog is available upon request.
This document provides specifications for the Modern-Lite industrial fluorescent lighting unit. It describes the unit's design for general or localized illumination over work areas. The steel reflector meets Underwriters' specifications and is finished in gray outside and white inside. Models come with renewable starters and approved ballasts. Specifications are provided for three models (B-248, B-348, B-448) listing the number and size of lamps, fixture dimensions, shipping weight, voltage, and ballast factor. Models can be used with 220-250 volt current. A catalog is available upon request.
MODERN-LITE INDUSTRIAL FLUORESCENT UNIT Designed for general illumination or for localized lighting over machines, work benches, assembly lines, etc. Reflector is drawn from a single sheet of heavy gauge steel to meet all Underwriters' specifications. Finished in French Gray outside, with white Porcelite Baked Enamel inside. Fitted with renewable starters and approved bal- lasts. Reflectors on Models B-248 and B-348 are held to the top housings by means of two captive spring tension latches. Wiring and all other parts of the fixture are readily accessible. Housing is fitted with seven-hole bracket at either end for straight or asymetric hanging; also with knockouts for rigid or stem mounting. For single or continuous row mounting. SPECIFICATIONS MODEL B-348 MODEL B-448 No. of Lamps Lamp Size FIXTURE Approx. Ship. Wt. Line Voltage Ballast Long Wide High Factor B-248 2 48"-40W 48" 12" 6i" 25 Lbs. 110-125 95-100% B-348 3 48"-40W 48" 12" 6i" 29 Lbs. 110-125 95-100% B-448 4 48"-40W 48" 14" 6}" 36 Lbs. 110-125 95-100% B-248 and B-448 can be furnished with instant start. Available for use with 220-250 volt current 60 cycle AC operation at no additional cost. Complete Catalog of Industrial & Commercial Units on Request M-112