I n s t r u c t i o n D a t a S h e e t AW50-40LE/42LE PART NUMBER 59954-01K Lockup Control Plunger & Sleeve Kit 59954-01K 1 Lockup Plunger Valve 1 Lockup Plunger Sleeve Disassembly / Assembly Steps: 1. Remove and discard the OEM sleeve and valve. 2. Install the Sonnax sleeve and valve assembly as pictured. Final Verification Steps: Perform a Wet Air Test or vacuum test of the sleeve assembly while in the bore at the outboard converter apply feed port as indicated. A vacuum test should reach at least 18" of vacuum. If performing a WAT, no leakage should occur at the neighboring exhaust port. For more information on the valve body testing procedures, go to www.sonnax.com Lock-up Control Plunger Valve Lock-up Control Plunger Sleeve Retainer No leakage. Converter Apply Feed WAT/Vacuum here.