This drop-in-place assembly includes a harder canister with more support for the plunger valve, which prevents sticking. The assembly also includes a case-hardened plunger valve with self-centering annular groves, a replacement spring, and larger o-ring. The OEM flow control valve is designed to increase pump efficiency by rerouting excess line pressure back to the suction side of the pump.
This drop-in-place assembly includes a harder canister with more support for the plunger valve, which prevents sticking. The assembly also includes a case-hardened plunger valve with self-centering annular groves, a replacement spring, and larger o-ring. The OEM flow control valve is designed to increase pump efficiency by rerouting excess line pressure back to the suction side of the pump.
This drop-in-place assembly includes a harder canister with more support for the plunger valve, which prevents sticking. The assembly also includes a case-hardened plunger valve with self-centering annular groves, a replacement spring, and larger o-ring. The OEM flow control valve is designed to increase pump efficiency by rerouting excess line pressure back to the suction side of the pump.
This drop-in-place assembly includes a harder canister with more support for the plunger valve, which prevents sticking. The assembly also includes a case-hardened plunger valve with self-centering annular groves, a replacement spring, and larger o-ring. The OEM flow control valve is designed to increase pump efficiency by rerouting excess line pressure back to the suction side of the pump.
plunger valve to stick open and/or leakage to occur. The canister o-ring relaxes and pressure bleeds past it. This drop-in-place assembly includes a harder canister with more support for the plunger valve, which prevents sticking. The assembly also includes a case-hard- ened plunger valve with self-centering annular groves, a replacement spring, and larger o-ring for improved sealing. Pump Flow Control Valve Assembly 56200-03K 1 Pump Flow Control Valve Assembly 1 O-Ring Note: Product supersedes 56200-02K COrrection Cause D i s t r i b u t o r D a t a S h e e t 5R55N/W/S PART NUMBER 56200-03K 2008 Sonnax Industries, Inc. 56200-03K Rev:-, 56200-03K 06-01-08 800-843-2600 802-463-9722 F: 802-463-4059 www.sonnax.com info@sonnax.com 1 COMPLAINT Pump noise, no movement until RPM increased SECONDARY COMPLAINTs Delayed engagements Low line pressure Sonnax Part Summary The OEM flow control valve is designed to increase pump efficiency by rerouting excess line pressure back to the suction side of the pump. It is common for the plunger valve to become stuck open, or for the canister to wear. This decreases line pressures and results in delayed engagements. The Sonnax pump flow control valve assembly eliminates the sticking and wear problems with redesigned and precisely machined parts. Features & Benefits Harder canister material resists wear and has improved valve support to prevent sticking. Plunger valve is made from case-hardened steel and has annular grooves to prevent side loading. Larger o-ring eliminates pressure loss at the pump face. Canister restores the regulated line orifice to improve valve and hydraulic stability. Drop-in-place replacement assembly for easy installation. O-Ring Pump Flow Control Valve Assembly Pump