horizontal line, or on the side farthest from the outline for vertical lines 20 20 60 20 20 20 20 60 60 (ALL DIMENSIONS IN MM) SCALE 1:1 Third angle orthogonal projection is depicted by this symbol, and must appear on all drawings Do not write mm after each number. Instead, include one statement of measurement. Scale must be included - a scale of 1:1 means the object is drawn to life size. If an object is too large to be drawn to life size, a scale of 1:2, 1:5, 1:10, 1:20 or 1:100 (such as a house) can be used. There are 2 weights of lines; the object outlines are slightly thicker, and all other lines are thinner. Hidden lines are dotted. NAME: SALLY JONES CLASS: YEAR 10B TITLE: STEPPED BLOCK DATE: 8/9/10 TOP VIEW FRONT VIEW SIDE VIEW The front view starts 40mm in and up from the lower left hand corner of the title block Projection lines are thin lines placed outside the outline of the object and define the area being dimensioned. They sit 1mm from the outline edge. Dimension lines are thin lines, and have closed arrowheads, which are thin and narrow. They are drawn 10mm from the outline of the object. Where there are multiple dimensions in the same area, dimension lines should remain 10mm apart. Smaller dimensions are labelled closest to the outline. Each dimension should only be labelled once. There must be an equal distance between each view (40mm) THIRD ANGLE ORTHOGONAL DRAWING A guide to the rules and regulations! Orthogonal drawing is a technical design language which ensures plans can be used by engineers to manufacture objects accurately. It is a very precise drawing method, and you should use an H or 2H pencil to create neat, precise lines. Text should be in 5mm high capital letters