ETEL manufactures industrial distribution transformers ranging from 100kVA to 2600kVA for indoor and outdoor use in New Zealand, Australia, and the Pacific Islands. The transformers have hermetically sealed tanks for long life and minimum maintenance, and accessories for protection and monitoring. ETEL's engineering team can discuss requirements for transformers suited to customers' particular needs.
ETEL manufactures industrial distribution transformers ranging from 100kVA to 2600kVA for indoor and outdoor use in New Zealand, Australia, and the Pacific Islands. The transformers have hermetically sealed tanks for long life and minimum maintenance, and accessories for protection and monitoring. ETEL's engineering team can discuss requirements for transformers suited to customers' particular needs.
ETEL manufactures industrial distribution transformers ranging from 100kVA to 2600kVA for indoor and outdoor use in New Zealand, Australia, and the Pacific Islands. The transformers have hermetically sealed tanks for long life and minimum maintenance, and accessories for protection and monitoring. ETEL's engineering team can discuss requirements for transformers suited to customers' particular needs.
ETELs Industrial Distribution Transformers are designed for simplicity
of installation and maintenance. All transformers are designed with
Hermetically sealed tanks for long life and minimum oil maintenance. The range extends from 100kVA or smaller through to 2600kVA, (3 phase) arrangements for indoor and outdoor applications, in New Zealand, Australia and the Pacic Islands. ETELs full range includes a model to meet your Distribution Transformer needs. Discuss your particular requirements with our Engineering team. Features Simple tank and terminal confgurations for optimum cost efciency Accessories for Transformer protection and Monitoring Cable Boxes, Kiosks or open bushing arrangements Hermetically sealed for long life 100 to 2600kVA Zinc Spray Paint system available Standard Transformer oil or Flameproof biodegradable fuid options available Technical Specifcations Core Type Distributed gap wound core, core type transformers Electrical Steel Type Cold rolled, grain oriented, silicon steel sheets Tank Sealing Hermetically sealed (non sealed types available) Oil Type Oil flled to BS148 and AS1767 HV Volts 11000, 22000, 33000 standard. Others available. LV Volts 415 - 240V Dyn11 433 - 250V Dyn11 standard, others available HV Tappings +5% to -7.5% up to 300kVA + 2.5 to -10% in 2.5% steps 500kVA and above Oil / Winding Rises 60 / 65C BIL / Power Frequency Levels 95kVpeak / 28kVrms 150kVpeak / 50kVrms 200kVpeak / 70kVrms Maximum Operating Pressure 35kPA Industrial CABLE BOX DISTRIBUTION TRANSFORMER Product Data Sheet Revision: 3 Document No. 904 - 0104 ISO 9001 Registered etel@eteltransformers.co.nz www.eteltransformers.co.nz t. (64) (9) 820 6110 f. (64) (9) 820 6111 Freephone NZ: 0800 893 835 Freephone AUS: 1800 099 560 ETEL Limited 550 Rosebank Road Avondale Auckland 1026 New Zealand Postal Address: P O Box 15 121 New Lynn Auckland 0640 New Zealand I n d u s t r i a l C A B L E