This document is a pump performance datasheet that provides specifications for a 30123 VL pump to be used in a project. It details key operating conditions and performance metrics like a flow rate of 291.1 USgpm and head pressure of 83.95 ft. It also outlines physical characteristics of the pump like an impeller diameter of 10.29 inches and material of cast iron. The document further specifies power requirements and pressure limits.
This document is a pump performance datasheet that provides specifications for a 30123 VL pump to be used in a project. It details key operating conditions and performance metrics like a flow rate of 291.1 USgpm and head pressure of 83.95 ft. It also outlines physical characteristics of the pump like an impeller diameter of 10.29 inches and material of cast iron. The document further specifies power requirements and pressure limits.
This document is a pump performance datasheet that provides specifications for a 30123 VL pump to be used in a project. It details key operating conditions and performance metrics like a flow rate of 291.1 USgpm and head pressure of 83.95 ft. It also outlines physical characteristics of the pump like an impeller diameter of 10.29 inches and material of cast iron. The document further specifies power requirements and pressure limits.
Consulting engineer : Customer : Customer ref. / PO : Quote number : Date last saved : 03/26/2014 1:47 PM Tag Number : Default Service : PACO Model : 30123 VL Quantity : 1 Quoted By (Sales Office) : Quoted By (Sales Engineer) : Operating Conditions Flow, rated : 291.1 USgpm Differential head / pressure, rated (requested) : 83.95 ft Differential head / pressure, rated (actual) : 83.95 ft Suction pressure, rated / max : 0.00 / 0.00 psi.g NPSH available, rated : Ample Frequency : 60 Hz Performance Speed, rated : 1,760 rpm Impeller diameter, rated : 10.29 in Impeller diameter, maximum : 12.10 in Impeller diameter, minimum : 9.00 in Efficiency : 64.08 % NPSH required / margin required : 10.06 / 0.00 ft - : - MCSF : 135.4 USgpm Head, maximum, rated diameter : 106.2 ft Head rise to shutoff : 26.36 % Flow, best eff. point (BEP) : 291.1 USgpm Flow ratio (rated / BEP) : 100.01 % Diameter ratio (rated / max) : 85.04 % Head ratio (rated dia / max dia) : 65.32 % Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1.00 / 1.00 / 1.00 / 1.00 Selection status : Acceptable Liquid Liquid type : Water Additional liquid description : Solids diameter, max : 0.00 in Solids concentration, by volume : 0.00 % Temperature, max : 68.00 deg F Fluid density, rated / max : 1.000 / 1.000 SG Viscosity, rated : 1.00 cP Vapor pressure, rated : 0.34 psi.a Material Material selected : Cast iron Pressure Data Maximum working pressure : 45.97 psi.g Maximum allowable working pressure : 175.0 psi.g Maximum allowable suction pressure : 175.0 psi.g Hydrostatic test pressure : 263.0 psi.g Driver & Power Data Motor sizing specification : Based on duty point (rated power) Margin over specification : 0.00 % Service factor : 1.00 Power, hydraulic : 6.17 hp Based on duty point (rated power) : 9.63 hp Non-overloading (max power) : 10.50 hp Nameplate motor rating : 10.00 hp / 7.46 kW Grundfos Quotation System 14.0.0.2014022617 Grundfos CBS Inc. 902 Koomey Road Brookshire, Texas 77423 phone: 1-800-955-5847 fax: 1-800-945-4777 www.pacopumps.com