This document provides information and equations for calculating beam properties like moment of inertia, section modulus, and deflection based on the beam material, load type, and dimensions. It includes equations for cantilevered beams with a concentrated or uniform load, and simply supported beams with a uniform load. The user can enter values for total load, beam length and span, desired deflection or moment of inertia, and the material properties like modulus of elasticity will be provided.
This document provides information and equations for calculating beam properties like moment of inertia, section modulus, and deflection based on the beam material, load type, and dimensions. It includes equations for cantilevered beams with a concentrated or uniform load, and simply supported beams with a uniform load. The user can enter values for total load, beam length and span, desired deflection or moment of inertia, and the material properties like modulus of elasticity will be provided.
This document provides information and equations for calculating beam properties like moment of inertia, section modulus, and deflection based on the beam material, load type, and dimensions. It includes equations for cantilevered beams with a concentrated or uniform load, and simply supported beams with a uniform load. The user can enter values for total load, beam length and span, desired deflection or moment of inertia, and the material properties like modulus of elasticity will be provided.
This document provides information and equations for calculating beam properties like moment of inertia, section modulus, and deflection based on the beam material, load type, and dimensions. It includes equations for cantilevered beams with a concentrated or uniform load, and simply supported beams with a uniform load. The user can enter values for total load, beam length and span, desired deflection or moment of inertia, and the material properties like modulus of elasticity will be provided.
(i) Concentrated Load: THEN Enter total weight here in pounds, including self- weight of beam Total Load p= 100.00 # Enter length of beam here, in feet span l= 10.00 ft 120 in Moment M (p*l) = 12,000 inch-# Section Modulus S (M/F b )= 0.504 Deflection*Moment of Inertia D*I (pl 3 /3E)= 1.986 THEN Enter desired deflection here D= 0.25 in And this will be the I you will need I = 7.94 in 4 OR Enter the desired I here I = 10.00 in 4 and this will be the deflection you will get D= 0.20 in All lengths in inches, all weights in pounds, UNO data for flyout above E (psi) STEEL 29,000,000 A. Cantilevered beam (support at one end only) ALUMINUM 10,000,000 WOOD 1,900,000 index 1 value 29,000,000 Fb (psi) = 23,800 aluminum is same as steel LOAD INCREASING TOWARDS FIXED END M= ### S= 0.2 D*I= ### S - Section Modulus - Allowable Stress Design (AISC 2-4) S=M/F b F b =23.8 ksi ( 0.66 x F y =36ksi) aluminum yield strength is same as steel!!! Variable Value Variable Value M= ### in# S= in 3 S= 6.8 in 3 M= 0 densities (pcf): steel 490 aluminum 175 wood 33 concrete 150 glass 160 (ii) (i) Uniform Load: Concentrated Load: Total Load p= 100.00 # Total Load p= 100.00 # span l= 10.00 ft span l= 10.00 ft 120 in 120 in Uniform Load w (p/l) = 0.833 #/in Moment M (wl 2 /2) = 6,000 inch-# Moment M (p*l/4) = 3,000 inch-# Section Modulus S (M/F b ) = 0.252 Section Modulus S (M/F b )= 0.126 Deflection * Moment of Inertia D*I (wl 4 /8E) = 0.745 Deflection*Moment of Inertia D*I (pl 3 /48E)= 0.124 D= 0.25 in D= 0.25 in I = 2.98 in 4 I = 0.50 in 4 I = 10.00 in 4 I = 10.00 in 4 D= 0.07 in D= 0.01 in A. Cantilevered beam B. Simply supported beam (support at one end only) (support at both ends) aluminum yield strength is same as steel!!! (ii) Uniform Load: Total Load p= 100.00 # span l= 10.00 ft 120 in Uniform Load w (p/l) = 0.833 #/in Moment M (wl 2 /8) = 1,500 inch-# Section Modulus S (M/F b ) = 0.063 Deflection * Moment of Inertia D*I (5wl 4 /384E) = 0.078 D= 0.25 in I = 0.31 in 4 I = 10.00 in 4 D= 0.01 in B. Simply supported beam (support at both ends)