This document is a bill of quantities (BOQ) for a new grease and specialty plant located in Silvassa. It includes 10 line items providing descriptions and quantities for structural steel work, roofing sheets, flashing, gutters, welding tests, surface preparation and painting, non-shrink grout, and a guard rail. The BOQ specifies materials, labor, and compliance with specifications for fabricating, erecting, transporting, welding, bolting, and surface treatment of structural steel components of the plant, as well as the application of roofing sheets, flashing, and gutters. Testing of welds and non-shrink grouting of foundations is also included.
This document is a bill of quantities (BOQ) for a new grease and specialty plant located in Silvassa. It includes 10 line items providing descriptions and quantities for structural steel work, roofing sheets, flashing, gutters, welding tests, surface preparation and painting, non-shrink grout, and a guard rail. The BOQ specifies materials, labor, and compliance with specifications for fabricating, erecting, transporting, welding, bolting, and surface treatment of structural steel components of the plant, as well as the application of roofing sheets, flashing, and gutters. Testing of welds and non-shrink grouting of foundations is also included.
This document is a bill of quantities (BOQ) for a new grease and specialty plant located in Silvassa. It includes 10 line items providing descriptions and quantities for structural steel work, roofing sheets, flashing, gutters, welding tests, surface preparation and painting, non-shrink grout, and a guard rail. The BOQ specifies materials, labor, and compliance with specifications for fabricating, erecting, transporting, welding, bolting, and surface treatment of structural steel components of the plant, as well as the application of roofing sheets, flashing, and gutters. Testing of welds and non-shrink grouting of foundations is also included.
BOQ FOR NEW GREASE & SPECIALITY PLANT, LOCATION SILVASSA
SR NO DESCRIPTION UNIT QTY RATE AMT.
1 SUPPLYING, TESTING, FABRICATING, BOLTING, WELDING, ERECTING & PROVIDING STRUCTURAL STEEL CONFORMING TO IS:2062 FE 250 (FE 410 W) GRADE A/B INCLUDING ANGLES, CHANNELS, BEAMS, PORTALS, PLATE GIRDERS, GRATINGS, CHEQUERED PLATES, TUBES FOR HAND RAILS, ANCHOR AND FOUNDATION BOLTS, RUNGS, ETC AS PER DRAWINGS; FOR ALL KINDS OF STRUCTURAL STEEL WORK INCLUDINGS PURLINS, BEAMS, COULMNS, TIES, PORTALS, TRUSSES, SAG RODS, RUNNERS, CLEATS, BRACKETS, ETC; TRANSPORTATION TO PLACE OF ERECTION, HANDLINGS, USE OF ALL SAFETY EQUIPMENTS, HYDRA CRANE , CHAIN PULLEY BLOCKS ETC; CARRYING OUT WELDING PROCEDURE/WELDER QUALIFICATION TESTS; PUG/GAS; DRILLING HOLES OF SUITABLE SIZE ; SUPPLYING & PROVIDING ERECTION AND PERMANENT BOLTS WITH NUTS & WASHERS ALL COMPLETE AS PER DRAWINGS, HPCL SPECIFICATION AND INSTRUCTIONS OF ENGINEER-IN-CHARGE. MT 625 1a SAME AS ABOVE BUT ONLY SUPPLY OF STEEL BY CLIENT MT QRO 2 SUPPLYING, PROVIDING & FIXING KLIPPON 0.55 TCT BARE GALVALUME OR EQUIVALENT SPECIFICATION SHEETS INCLUDING SCREWS AND CLIPS INCLUDING ALL APPLICABLE SCAFFOLDING WITH LONGITUDINAL AND SIDE LAPPING AS APPLICABLE FOR SLIVASA AS PER MANUFACTURE SPECIFICATIONS. AS LAID SLOPPING AREA WITHOUT LAPS WILL BE MEASURED. AND FOR VERTICAL CLADDING, LOUVERS ETC. SQM 5500 3 PROVIDING AND FIXING 1MM FRP SHEET (TRANSLUSCENT) OF MACHINE PROFILE AS PER SPECIFICATIONS WITH ALL MATERIAL LABOUR ETC. COMPLETE AT ALL ELEVATIONS. SQM 55 4 SUPPLYING & PROVINDING RIDGE COVER IN 0.55 MM TCT BARE GALVALUME OR EQUIVALENT SPECIFICATION SHEETS INCLUDING SCREWS AND CLIPS INCLUDING ALL APPLICABLE SCAFFLODING WITH LONGITUDNAL AND SIDE LAPPING AS APPLICABLE FOR SLIVASA AS PER MANUFACTURE SPECIFICATIONS. LENGTH OF RIDGE WITHOUT LAPS WILL BE MEASURED. RM 150 STRUCTURAL STEEL M.T.O. FOR HPCL 30.04.09 DATE : Page 1 of 2 SR NO DESCRIPTION UNIT QTY RATE AMT. 5 SUPPLYING & PROVINDING FLASHING IN 0.55 MM TCT BARE GALVALUME OR EQUIVALENT SPECIFICATION SHEETS INCLUDING SCREWS AND CLIPS INCLUDING ALL APPLICABLE SCAFFLODING WITH LONGITUDNAL AND SIDE LAPPING AS APPLICABLE FOR SLIVASA AS PER MANUFACTURE SPECIFICATIONS. LENGTH OF FLASHING WITHOUT LAPS WILL BE MEASURED. RM 300 5a G.I. CORNER PIECE RM 50 5b G.I. EAVES FITTER RM QRO 5c S-TYPE LOUVERS RM QRO 6 SUPPLYING & PROVINDING EAVES GUTTERS WITH BRACKETS INCLUDING SCREWS AND CLIPS INCLUDING ALL APPLICABLE SCAFFLODING WITH LONGITUDNAL AND SIDE LAPPING AS APPLICABLE FOR SLIVASA AS PER MANUFACTURE SPECIFICATIONS. LAPS SHALL NOT BE MEASURED. RM 50 7 CARRY OUT RADIOGRAPHY TEST FOR BUTT WELD J OINTS OF ALL THICKNESSES INCLUDING SUPPLY OF ALL MATERIALS, EQUIPMENT ETC. AND SUBMISSION OF REPORT & AS PER HPCL SPECIFICATIONS 7a1 <20 MM THICK RM 1 7a2 >=20 MM THICK RM 1 7b CARRYOUT DPT/MPT OF WELD J OINTS RM 1 8 CLEANING THE SURFACE WITH BRUSHING, CHIPPING, SCRAPPING, REMOVING DUST AND LOOSE PARTICLES INCLUDING ALL LABOUR, TOOLS, CONSUMABLES ETC. AND SURFACE PREPARATION, PAINTING AS PER GIVEN IN HPCL SPECIFICATION OF STRUCTURAL STEEL WORKS & SPECIFICATION FOR PAINTING MT 625 9 PROVIDING, MIXING AND LAYING NON SHRINK GROUT (1:2) FOR POCKETS OF FOUNDATIONS, UNDER BASE PLATES, MACHINE FRAMES, STEEL COLUMNS ALONGWITH SHIMPLATES FOR LEVELLING PURPOSE, CURING, CLEANING OUT SURFACE ETC. COMPLETE AS PER HPCL SPECIFICATIONS, DRAWINGS & DIRECTIONS. CUM 50 10 PROVIDING AND FIXING GUARD RAIL TO PROTECT THE BUILDING AND THE PARKING AREA TOWARDS THE YARD. THE RAIL SHALL BE 0.6m HIGH, HAVE A TUBULAR STEEL TOP RAIL, AND SHALL BE PAINTED YELLOW AND BLACK. THE GURADRAIL SHALL BE POSITIONED 0.5m FROM THE BUILDINGS. THE RAIL SHALL BE FABRICATED FROM 65mm HG TUBE AND SAME SHALL BE PROVIDED WITH TWO COATS OF YELLOW SHADE PAINT OVER SUITABLE PRIMER. RM 200 QRO = QUOTE RATE ONLY. Page 2 of 2