The document contains two tables that define deflections and slopes for different types of beams. Table 1 provides the definitions for cantilever beams, defining the deflection, slope, and rotation at the end of the beam. Table 2 similarly defines these values for simple beams, including the maximum deflection point and rotations at each support. Both tables note that the flexural rigidity is assumed to be constant.
The document contains two tables that define deflections and slopes for different types of beams. Table 1 provides the definitions for cantilever beams, defining the deflection, slope, and rotation at the end of the beam. Table 2 similarly defines these values for simple beams, including the maximum deflection point and rotations at each support. Both tables note that the flexural rigidity is assumed to be constant.
The document contains two tables that define deflections and slopes for different types of beams. Table 1 provides the definitions for cantilever beams, defining the deflection, slope, and rotation at the end of the beam. Table 2 similarly defines these values for simple beams, including the maximum deflection point and rotations at each support. Both tables note that the flexural rigidity is assumed to be constant.
Table 1. Deflections and slopes of cantilever beams
v = deflection in the y direction (positive upward) dv/dx = slope of the deflection curve B = v(L) = deflection at end B of the beam (downward) B = angle of rotation at end B of the beam (clockwise) EI = constant 1 2 Pgina 1 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 3 4 5 Pgina 2 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 6 7 8 Pgina 3 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 9 10 Table 2. Deflections and slopes of simple beams v = deflection in the y direction (positive upward) dv/dx = slope of the deflection curve C = v(L/2) = deflection at midpoint C of the beam (downward) x1 = distance from support A to point of maximum deflection max = vmax = maximum deflection (downward) A = angle of rotation at left-hand end of the beam (clockwise) B = angle of rotation at right-hand end of the beam (counterclockwise) Pgina 4 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ EI = constant 1 2 3 Pgina 5 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 4 5 6 Pgina 6 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 7 8 9 Pgina 7 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 10 11 12 Pgina 8 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/ 13 Pgina 9 de 9 Deflections and Slopes of Beams 28/09/2014 http://virtual.cvut.cz/beams/