You need: stiff satin, separating zip, metallic/plastic
bones, lace appliqu/embroidery, fusing, cords for loops.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED, IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 2 cm for middle back seam (to stitch the zipper. ! cm for other seams
ATTENTION! "efore se#ing, print paper patterns and lay them out according to the linen #idth (minimal #idth is !$% cm to find out ho# much material you need (do not forget about double and symmetric details. &'() *(&+),, "( -./(012 &+3' )43-'(* 5 3'(Y 61*3 "( -4+)-+7+),8 92(.*( :((9 "(.6 3'/(.7 7+/(-3+4).
CUTTING:
*atin: !. .ll corset pieces. 1se also as lining.
0using: !. .ll corset pieces.
2ace/trimming: se# to ready front parts and bead by hands.
INSTRUCTIONS:
!. *et metal/plastic bones #hich are 2 cm shorter than seam length (to make se#ing more comfortable in bodice seams.
2. 3he zipper is in back middle seam.
;. 0astener: on the collar back, 2 small buttons and cord loops.