The document compares the specification requirements for a geotextile to the contractor's proposal for a construction project. The specification requires a mass per unit area of 130gr/m2 according to EN ISO 9864, a longitudinal strength of 8KN/M according to EN ISO 10319, an elongation of 50% according to EN ISO 12236, and a strength of 1500N according to the CBR-test EN iso12236. The contractor's proposal meets the requirements for mass per unit area but has lower strengths and higher elongations. The proposal was approved by Harradine with the remarked values.
The document compares the specification requirements for a geotextile to the contractor's proposal for a construction project. The specification requires a mass per unit area of 130gr/m2 according to EN ISO 9864, a longitudinal strength of 8KN/M according to EN ISO 10319, an elongation of 50% according to EN ISO 12236, and a strength of 1500N according to the CBR-test EN iso12236. The contractor's proposal meets the requirements for mass per unit area but has lower strengths and higher elongations. The proposal was approved by Harradine with the remarked values.
The document compares the specification requirements for a geotextile to the contractor's proposal for a construction project. The specification requires a mass per unit area of 130gr/m2 according to EN ISO 9864, a longitudinal strength of 8KN/M according to EN ISO 10319, an elongation of 50% according to EN ISO 12236, and a strength of 1500N according to the CBR-test EN iso12236. The contractor's proposal meets the requirements for mass per unit area but has lower strengths and higher elongations. The proposal was approved by Harradine with the remarked values.
Mass per unit area is 130gr/m2 according to EN ISO 9864 8KN/M longitudinal according to EN ISO 10319 Elongation of 50% according to EN ISO 12236 strength of 1500N according to CBR-test EN iso12236
Mass per unit area is 130g/m2 according to EN ISO 9073-1:1989 Strip tensile strength (longitudinal is 2KN/M and crosswise is 3KN/M) according to EN ISO 10319 Elongation at break (longitudinal is 130% and crosswise is 150%) according to EN ISO 5082 CBR puncture strength displacement is 400N according to ISO EN 12236
Approved by Harradine:
Mass per unit area is 130g/m2 according to EN ISO 9073-1:1989 approved by Harradine Strip tensile strength (longitudinal is 2KN/M and crosswise is 3KN/M) according to EN ISO 10319 approved by Harradine Elongation at break (longitudinal is 130% and crosswise is 150%) according to EN ISO 5082 approved by Harradine CBR puncture strength displacement is 400N according to ISO EN 12236 approved by Harradine