2. Check this using command rfvcp:cell=291A; 3. Run rrpgp:rp=all; This shows if any of the RPs are carrying a much higher loa d than the others 4. Obtain TG of cell, in this case 291 for 291A 5. run rrscp:scgr=291; Obtain details of DEV in this case RTPGD-5248 6. run radrp:dev=rtpgd-5248;This gives u the RP, so you can confirm if its on th e congesting RP 7. Engage Core at this point :) or you can redistribute the cells yourself 8. Run rrlri:force; 9. check for improvement LOAD must reduce 10. if its still the same engage core or if you really must cold boot the RP by running blrpi:rp=1008,forced; blrpe:rp=1008; 11. Check for improvement LOAD must reduce