drawing. It is a 2D method of describing objects in pictorial form. SETTING ISOMETRIC SNAP Before starting isometric drawing, must set Snap to isometric style:
Command: snap, ENTER Specify snap setting or [On/OFF/Aspect]: type in s for style, ENTER Enter snap grid style [Standard/Isometric]: type i for isometric, ENTER Specify vertical snap: Type 5, ENTER
Check out the cursor hair line. It will now be set in isometric pattern. There 3 main positions when working in this setting. Use Ctrl-E or F5 to toggle between isometric top, iso-right or iso-left.
2 The three isoplanes and isocircles. Isoplane top 3 Isometric Circles When drawing circles in isometric, the result will be an ellipse. To ensure that the ellipse is an isometric circle every time Ellipse command is called, the setting I must be used.
Command: ellipse Then type in i (for isocircle), ENTER Specify radius:.
Try to construct an isocircle at the 3 different positions (top, right, left).
4 To produce an isometric, it is advisable that you begin by sketching out the isometric drawing complete with the vital dimensions to give you an idea of how it would look like on AutoCAD. Once the sketch is confirmed, you are then ready to start drawing using the software. 5 Exercise time! Class work. 6 7 There is an error in the step- by-step figure. You will find out what the mistake is while practicing with this example exercise. ISOMETRIC TUTORIAL 8