This document provides instructions for installing a direct fill female threaded tank connection assembly. The assembly includes a dry disconnect coupler to connect to the tank, a spill container below with male threads, and an overfill prevention valve with a drop tube running from the valve into the tank. The drop tube end is to be no more than 6 inches from the bottom of the tank.
This document provides instructions for installing a direct fill female threaded tank connection assembly. The assembly includes a dry disconnect coupler to connect to the tank, a spill container below with male threads, and an overfill prevention valve with a drop tube running from the valve into the tank. The drop tube end is to be no more than 6 inches from the bottom of the tank.
This document provides instructions for installing a direct fill female threaded tank connection assembly. The assembly includes a dry disconnect coupler to connect to the tank, a spill container below with male threads, and an overfill prevention valve with a drop tube running from the valve into the tank. The drop tube end is to be no more than 6 inches from the bottom of the tank.
This document provides instructions for installing a direct fill female threaded tank connection assembly. The assembly includes a dry disconnect coupler to connect to the tank, a spill container below with male threads, and an overfill prevention valve with a drop tube running from the valve into the tank. The drop tube end is to be no more than 6 inches from the bottom of the tank.
EVR Approved Direct Fill Female Threaded Tank Connection
2 928 Series dry
disconnect coupler 4 516MO Series AST spill container with male threads Top of AST (not supplied) 2 x 4 Long upper pipe nipple (supplied with valve). Longer nipples may be required for proper shut-of height 9095A-5200AVEVR Series overfll prevention valve (shown with drop tube adaptor) 2 x 4 (2 x 6 or 2 x 12 also available) 419 Series drop tube 539 Difuser (shown, optional) or Drop Tube cut at 45 degree angle. The top of Difuser opening or top of Drop Tube cut to be no greater than 6 from the bottom of the tank (or per local requirements outside of the state of California). The Drop Tube Difuser and Overfll Prevention device may have to be removed (if installed) upon District request to verify the existence of a submerged fll pipe. 2.5 735 Series dust cap (install when not fueling) 4 Female threaded riser 9095A-5200AVEVR Series dry disconnect adaptor supplied with overall prevention valve 2 x 4 Long upper pipe nipple (supplied with valve). Longer nipples may be required for proper shut-of height 4 Female threads connect to spill container. 2 Female threads connect to upper pipe nipple.