This document provides details of a screw calculation for a steel structure located in Boufarik, Algeria. It includes the geometry of the structure which is 8.3m long, 4.5m wide and 4.7m high. It also specifies the location in Boufarik at an elevation of 18m above sea level. The document then lists the panel types, screw types, and wind load calculations to determine the design forces for screws in the wall and roof of the structure. It calculates a peak velocity pressure of 0.87 kN/m^2 to be used in the screw force calculations.
This document provides details of a screw calculation for a steel structure located in Boufarik, Algeria. It includes the geometry of the structure which is 8.3m long, 4.5m wide and 4.7m high. It also specifies the location in Boufarik at an elevation of 18m above sea level. The document then lists the panel types, screw types, and wind load calculations to determine the design forces for screws in the wall and roof of the structure. It calculates a peak velocity pressure of 0.87 kN/m^2 to be used in the screw force calculations.
This document provides details of a screw calculation for a steel structure located in Boufarik, Algeria. It includes the geometry of the structure which is 8.3m long, 4.5m wide and 4.7m high. It also specifies the location in Boufarik at an elevation of 18m above sea level. The document then lists the panel types, screw types, and wind load calculations to determine the design forces for screws in the wall and roof of the structure. It calculates a peak velocity pressure of 0.87 kN/m^2 to be used in the screw force calculations.
This document provides details of a screw calculation for a steel structure located in Boufarik, Algeria. It includes the geometry of the structure which is 8.3m long, 4.5m wide and 4.7m high. It also specifies the location in Boufarik at an elevation of 18m above sea level. The document then lists the panel types, screw types, and wind load calculations to determine the design forces for screws in the wall and roof of the structure. It calculates a peak velocity pressure of 0.87 kN/m^2 to be used in the screw force calculations.
Ineniring in proizvodnja montanih objektov Prijatljeva 12, 8210 Trebnje, Slovenija Phone: +386 7 34 60-339, Fax: +386 7 34 60 337 1.1 Geometry of object b = 8,3 m lenght of object d = 4,5 m width of object h = 4,7 m height of object = incline of roof 1.2 Location of object Location of object Boufarik, Ageria Category of ground I Elevation: 18 m 1.3 Panels 1.3.1 Wall 1.3.2 Roof Panel: FTV Panel: SNV Thickness of external steel sheet: 0,63 mm Thickness of external steel sheet: 0,75 mm washer saddle Width: 1,0 m Width: 1,0 m Type of fixing: standard Type of fixing: standard 1.4 Screws Screw for steel: E19 Screw for concrete: Thickness of structure-wall: 4 mm or more Thickness of structure-roof: 4 mm or more Nrd,w =: 1,80 kN design force - wall (steel structure) Nrd,w,c =: 0,80 kN design force - wall (concrete structure) Nrd,r =: 2,33 kN design force - roof 1.5 Wind load 1.4.1 The basic wind velocity v b,0 = 25,0 m/s the fundamental value of the basic wind velocity C dir = 1,0 the directional factor C season = 1,0 the season factor v b = x C season x v b,0 = 25 m/s 1.4.2 The basic velocity pressure = 1,2 kg/m 3 the air density q b =0,5 x x v b 2 = 375 kg/ms 2 1.4.3 The mean wind velocity z = h = 4,7 m a height above the terrain C 0 (z) = 1,00 the roughness factor C r (z) = 1,044 the orography factor k r x ln ( z ) za z min z z max C r (z) = z 0 C r (z min ) za z z min k r = 0,19 x ( z 0 ) 0.07 = 0,170 the terrain factor z 0,II z min = 1,00 m z max = 200,0 m z 0 = 0,01 m z 0,II = 0,05 m v m (z) =(z) x C 0 (z)
x v b = 26,11 m/s 1.4.4 The peak velocity pressure z e = h = 4,7 m the reference height C e (z e ) = 2,33 the exposure factor C e (z e ) =[1+7 x l v (z e )] x Cr 2 (z) x C 0 2 (z) l v (z e ) = 0,163 the turbulence intensity k l za z min z e z max l v (z e ) = C 0 (z e ) x ln (z e /z 0 ) l v (z min ) za z e z min k l = 1,0 the turbulence factor q p (z e ) = C e (z e ) x q b = 0,87 kN/m 2 4 , 5 8,3 ground plan EJOT JT3-12-5,5xL